V.A.S.
Fredenstein V.A.S. Microphone Preamplifier The V.A.S. Microphone Preamplifier is a single channel stand-alone device. The V.A.S. MicPre features top of the line performance, key component to achieve this performance level is our new OPA2 discrete audio operational amplifier. As all Fredenstein products, it is not a copy of an older design, but a completely new circuitry manufactured in SMT technology.
Fredenstein V.A.S. Microphone Preamplifier Installation: Electrical Safety Warnings: Do not open the enclosure, hazardous voltages are present inside! There are no user serviceable parts inside. If you need to replace the mains fuse, make sure the replacement has the same rating (0.5AT 250V). Rear View: Please connect your microphone input and the output first to the XLR or TRS connectors located on the back panel. Connect the mains cable to the V.A.S. MicPre and then to a grounded mains outlet.
Fredenstein V.A.S.
Fredenstein V.A.S. Microphone Preamplifier Detailed Description: DI – Direct Input: The most common use for the DI input is to connect instruments like guitars directly to the V.A.S. Pre. The input impedance is greater than 100K Ohms to insure compatibility with most instrument pickups. After inserting a balanced (Tip-Ring-Sleeve) or an unbalanced (Tip-Sleeve) plug, the balanced microphone input on the back-panel is automatically disabled.
Fredenstein V.A.S. Microphone Preamplifier Technical Data: Frequency Response Distortion Input Noise Gain Range Input Impedance Low Cut DI Impedance Max. Input Level Output Impedance Max. Output Level Input Attenuator (PAD) Mains Voltage Power Consumption : : : : : : : : : : : : : 20 Hz – 20,000 Hz, +/- 1 dB < 0.
Contact Info: Fredenstein Professional Audio by Orion Communication 7F-1, No. 582, Ruei Guang Rd. Neihu District Taipei 114 Taiwan Phone : Email : Web : + 886-2-2657-2618 info@fredenstein.com www.fredenstein.
