V.A.S.
Fredenstein V.A.S. Compressor The V.A.S Compressor is single channel FET compressor with Stereo link capability. It incorporates Fredenstein's proprietary Reverse-Mancini FET architecture for increased linearity and noise performance. In addition, the output stage consists of our high performance OPA2 discrete operational amplifier coupled to a high quality American-made steel core transformer.
Fredenstein V.A.S. Compressor Installation: Electrical Safety Warnings: Do not open the enclosure, hazardous voltages are present inside! There are no user serviceable parts inside. If you need to replace the mains fuse, make sure the replacement has the same rating (0.5AT 250V). Rear View: Please connect your audio inputs and outputs first to the XLR or TRS connectors located on the back panel. If you own two V.A.S. Comps, please insert a standard TRS cable into link connectors on both units.
Fredenstein V.A.S. Compressor Front View: Rotary Controls: B-WIDTH : INPUT GAIN COMP ATTACK : : COMP RELEASE : COMP RATIO : MAKE-UP : MIX : Side-Chain Filter control, fully clockwise no filter, counter clockwise 2KHz to 20KHz Bandwidth Sets the line level gain in the range from -10 to +20dB Sets the attack time of the compressor Range from 0.5 to 50ms Sets the release time of the compressor Range from 70ms to 2.
Fredenstein V.A.S. Compressor Operation: Like most FET compressors, the Fredenstein V.A.S. Compressor features a fixed threshold. The compression depth is controlled by changing the input gain. Increasing the input gain will cause the compressor to apply an increased gain reduction. The compressor Make-up control is used to compensate for the gain reduction. The maximum compressor Make-up gain is 20 dB.
Contact Info: Fredenstein Professional Audio by Orion Communication 7F-1, No. 582, Ruei Guang Rd. Neihu District Taipei 114 Taiwan Phone : Email : Web : + 886-2-2657-2618 info@fredenstein.com www.fredenstein.
