F600A COMPRESSOR Operating Manual
Fredenstein F600A Compressor The F600A Compressor is a high performance tool for professional recording and mastering engineers. The F600A features a fully externally and internally balanced signal path with much lower distortion than conventional compressors. It comprises of a analog gain control circuit and and a digital side-chain based on two DSPs. This technology can achieve more than 20 dB of gain reduction while maintaining very low distortion.
Fredenstein F600A Compressor Installation: Please power down your rack or box first, before inserting the F600A. Since the F600A uses the link interconnect in the box or rack, it cannot coexist with any other third-party modules using the same link interconnect (PIN 6 on the edge connector). If your are using a Fredenstein Bento box, please turn off the the compressor link switches to any third party module(s), only turn the link switches on between F600/F600A modules.
Fredenstein F600A Compressor High Pass Filter: To avoid compression of low frequencies, the side-chain has a built-in variable high pass filter. Minimum is a flat frequency response ( fully CCW), maximum is 4000Hz (fully CW). Since this high pass filter can be tuned up to 4 kHz for eample, the F600A can be used as De-Esser or on a lathe as a cutting speed limiter. ON Switch: Switches the the unit on and the VU meter displays the gain reduction ( 0 VU without gain reduction).
Fredenstein F600A Compressor Technical Data: Reference Level Make-up Gain Threshold Attack Time Range Release Time Range Compressions Ratio High Pass Filter Frequency Response Distortion S/N Ratio Input Impedance Max. Input Level Output Impedance Max. Output Current Max. Output Level Power Consumption : : : : : : : : : : : : : : : : 0 db = +4 dBu (American Studio Standard) 0 to +15.
Contact Info: Fredenstein Professional Audio by Orion Communication 7F-1, No. 582, Ruei Guang Rd. Neihu District Taipei 114 Taiwan Phone : Email : Web : + 886-2-2657-2618 info@fredenstein.com www.fredenstein.