Bento 6 Module Carrier Operating Manual
Fredenstein Bento 6 Module Carrier The Fredenstein Bento 6 is a high performance module carrier for Fredenstein Series 600 modules or API-500 compatible plug-in cards. The unit can accept a maximum of 6 modules. The Bento 6 features several important upgrades compared with third party products: Universal power supply: Mains voltages range from 90V AC to 240V AC, 50 to 60 Hz. Increased output currents: +-16V DC 1.6A and +48V DC 0.
Fredenstein Bento 6 Module Carrier Operation: After installation of the modules connect the mains cord to the Bento 6 IEC socket located on the back-panel and than connect the mains cable to a grounded outlet. Now turn the Bento 6 on by operating the I/O switch (also part of the IEC socket on the back). The three LEDs on the frontpanel will come on within 5 seconds and the Bento 6 is ready for use.
Fredenstein Bento 6 Module Carrier Specifications: Input Voltage: Output Voltages: 90V AC to 240V AC, 50 to 60 Hz +16V DC 1.6A -16V DC 1.6A +48V DC 0.3A Power Consumption: max 90W Dimension (LxHxD): 300mm x 135mm x 190mm (without handle and feet) 350mm x 145mm x 190mm (including handle and feet) Weight: 3.8kg(NW) ; 4.
Fredenstein Bento 6 Module Carrier Component Side Pin 1 Frame Ground Pin 2 Main Out + Pin 3 Digital Interconnect 1 Pin 4 Main Out - Pin 5 Audio Ground Pin 6 Compressor Buss Pin 7 Digital Interconnect 2 Pin 8 Main In - Pin 9 Digital Interconnect 3 Pin 10 Main In + Pin 11 Digital Interconnect 4 Pin 12 +16V Supply Pin 13 Supply Ground Pin 14 -16V Supply Pin 15 +48V Supply Fredenstein Bento 6 Manual V1.
Contact Info: Fredenstein Professional Audio by Orion Communication 7F-1, No. 582, Ruei Guang Rd. Neihu District Taipei 114 Taiwan Phone : Email : Web : + 886-2-2657-2618 info@fredenstein.com www.fredenstein.
