Bento 10S Module Carrier Operating Manual
Fredenstein Bento 10S Module Carrier The Fredenstein Bento 10S is a high performance module carrier for Fredenstein Series 600 modules or API-500 compatible plug-in cards. The unit can accept a maximum of 6 modules. The Bento 10S features several important upgrades compared with third party products: Universal power supply: Mains voltages range from 90V AC to 240V AC, 50 to 60 Hz. Increased output currents: +/-16V DC +/-3A and +48V DC 0.25A, 600mA per slot which is more than double the standard calls for.
Fredenstein Bento 10S Module Carrier Front View: Operation: After installation of the modules, connect the mains cord to the Bento 10S IEC socket located on the back-panel and than connect the mains cable to a grounded outlet. Now turn the Bento 10S on by operating the I/O switch (also part of the IEC socket on the back). The five LEDs on the frontpanel will come on within 5 seconds and the Bento 10S is ready for use.
Fredenstein Bento 10S Module Carrier Specifications: Input Voltage: Output Voltages: 90V AC to 240V AC, 50 to 60 Hz +16V DC 3.0A -16V DC 3.0A +48V DC 0.25A Power Consumption: max. 150W Dimension (LxHxD): 480mm x 140mm x 190mm Weight: 4.5kg(NW) ; 6.
Fredenstein Bento 10S Module Carrier Component Side Pin 1 Frame Ground Pin 2 Main Out + Pin 3 Digital Interconnect 1 Pin 4 Main Out - Pin 5 Audio Ground Pin 6 Compressor Buss Pin 7 Digital Interconnect 2 Pin 8 Main In - Pin 9 Digital Interconnect 3 Pin 10 Main In + Pin 11 Digital Interconnect 4 Pin 12 +16V Supply Pin 13 Supply Ground Pin 14 -16V Supply Pin 15 +48V Supply Fredenstein Bento 10S Manual V1.
Contact Info: Fredenstein Professional Audio by Orion Communication 7F-1, No. 582, Ruei Guang Rd. Neihu District Taipei 114 Taiwan Phone : Email : Web : + 886-2-2657-2618 info@fredenstein.com www.fredenstein.