Artistic Compressor Operating Manual
Fredenstein Artistic Compressor The Artistic Compressor is a single channel FET compressor with multi-channel link capability in the 500 series form factor. The compressor features rotary controls for Input Gain, Release Time, Compression Ratio, Make-up Gain and Wet-Dry Mixing (parallel compression). The Attack Time can be set in three steps, as well as the side-chain low cut filter. The LED bar-graph meter indicates the gain reduction in the range of 1dB to 16dB.
Fredenstein Artistic Compressor Rotary Controls: INPUT : RAT : REL : OUTPUT : MIX : Sets the line level gain in the range of -10 dB to +20 dB Sets the compression ratio in the range of 2:1 to 20:1 Sets the release time of the compressor from 70ms to 2.5s Make-up gain control in the range of 0 dB to +20 dB Output Mixer between the compressed (wet) and uncompressed (dry) signals Switches: SC Filter : LINK : ATT : ON/BYP : Selects the low cut filter in the side-chain.
Fredenstein Artistic Compressor Detailed Description: Like most FET compressors and caused by limitations of FET devices, the Fredenstein Artistic Compressor features a fixed threshold. The compression depth is controlled by changing the input gain. Increasing the input gain will cause the compressor to apply an increased gain reduction. The compressor output level control is used to make up for the gain reduction. The maximum compressor output gain is +20 dB.
Contact Info: Fredenstein Professional Audio by Orion Communication 7F-1, No. 582, Ruei Guang Rd. Neihu District Taipei 114 Taiwan Phone : Email : Web : + 886-2-2657-2618 info@fredenstein.com www.fredenstein.