LT70B Smart Locator User Guide
Introduction The following topics describe the basics of using this guide and your new tracker device. Before You Begin Thank you for purchasing your new LT70B Tracker! The following topics explain how best to use this guide to get the most out of your device. Before Using Your Device Read Safety and Notices thoroughly for proper usage. Accessible services may be limited by subscription contract conditions.
Get Started The following topics give you all the information you need to set up your device and wireless service for the first time. Device Parts and Functions Learn your device's primary parts and functions. Device and Charger Layout The following illustration outlines your device's primary external features and buttons. LED Power Button Charge the Battery Follow these instructions to charge your device's embedded battery using the included USB Cable. 1. Plug USB cable into USB port of PC 2.
Battery Charging Cautions Charging Conditions: Under low temperatures charging performance decreases. Charge your device in temperatures between 0°C – 40°C. Do not charge in places where there is high humidity. Use Supplied Accessories: Always use the supplied USB cable. Precaution for Extended Use: Your device may become hot when used for a long time or while charging, especially in high temperatures. Prolonged contact with skin may cause low-temperature burn injuries.
How to Download the APP . Step 1: Power UP the device and Activate By pressing the button for 1 sec. device turns on with green LED and beeper When device is power on, the device will be activated automatically for next 2 ~ 3 min. Step 2: Download the App Visit your App store on your smartphone. Search for “Smart Locator" Find the App, download and install. Create Username and Password Step 3: Begin registering your tracker device Register your IMEI of the device via Bluetooth. a.
Device and Battery Charger LED Scenario Function Power ON Power OFF Button Press Duration 1 sec press LED Color Device Behavior GREEN 2-tone rising beep 7 second longpress, button release, followed by quick button press. AMBER LED turns ON once device powers ON and is GREEN for 2 sec After 7 seconds, LED blinks Amber every 500 milliseconds to imply action needed. Quick button press within 2-3 seconds stops LED blinking and confirms power down. LED shuts off.
Factory Reset Device must be placed on and connected to charging dock, then 4 short button presses, 2 second pause, followed by quick button press. Blinks Amber for 5 sec after 4 presses After 4 presses, alert sound starts and plays for 2 seconds, during which time user pauses for 2 seconds then LED blinks Amber every 500 milliseconds to imply action needed. Then user makes quick 5th button press. The 5th button press should happen within 5 seconds after pause, else action is cancelled.
Item Description GPS Qualcomm WTR2965 WIFI/BT Qualcomm QCA9377 Memory RAM – 256MB Flash - Operating System 256MB Linux 8
Product Safety and Warranty Information The following topics outline your device's warranty and service information. General Precautions • It is normal that your wireless device may get hot when you use it. • Use your device and accessories with care and in a clean environment. • Keep your device away from open flames,fire or lit cigarettes. • Protect your device and accessories from water and vapor and keep them dry. • Do not drop, throw or bend your device.
Safety and Notices The following topics address important safety precautions, general notes, and required RF exposure information for your mobile broadband device. Safety Precautions The following topics outline important safety precautions that must be observed when using your device. Important Notice Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost.
FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
