SPECTRA F70060 PF MAP. Height: 12: (00m) antes: BY M0 Sa Sai 8A OMA Md 81 pHg S42 oe) Bir 1123 HZ 1 1080 B81 RS 910 1930 1073 (084 1086 1097 (033 9mm BOR DIZ BEY ORS ORF DNA M19 BIL GST 200 so Lid 8% m 1 AFT aon) 1200mmA7.
PACKAGE CONTENT A Wire rope Ling B Contraction rope Los C Waterfall Mounting Bracket 1 6.
SAFETY INSTRUCTION Please read and understand all instructions: before operate or install the product To: reduce the risk of FIRE OR INJURY. TO PERSONS: 1: Shutoff the novelette to the wires that you:are working on: 2. Dy not open or disassemble the LED fixture, 1 contain no serviceable parts Inside. Opening or edifying the LED fixture can be dangerous and will void the stalwartly, 3. Storage environment: store the LED fodder ina dry.
READ BEFORE INS ELATION WARNING: To avoid the damaging the LED chips; don't ouch the LED chips with you hands or:anything else during all the processes of opening the package; installing the fixture and maintaining the fixture.
INSTALLATION & Take out tha power supply (EF), find the preset point and damp the power supply {F io the waterfall mounting bracken, then connect the wire on the light and the wire on power supply(F).
INSTALLATION If you want to install the Power supply(F) outside: the lamp, please follow steps: as below, Take out the Power cord bracket(D} hook the hole in the Power supply(F) and hang iron the: shelf.
INSTALLATION There are three installation ways for Step 4 Moxie 1: Wire rope Installation Take out the wire rope(A}; hang the wire rope(A) on the circle of d lamp women, Then need twa people working together to lift the: lamp.
INSTALLATION Mode 2: Waterfall Mounting Bracket Installation # Take out the waterfall mounting bracket (Can two men worked together to lift the lamp y
SECTIONAL DIMMING FUNCTION Be grue to hang from the center of the hanger fo ensure a balanced fixture « Make sure all wire joints are connected well. Then you san tur ort the fae and use the dimmer with lo adjust the brightness as whatever you want.
DAISY CHAIN FUNCTION For multiples lights connected together, theta is 1pe (1187) daisy chain cord(E) for postpone lights You will need to use a controller (not included) to control all the other lights dilemma & tum on and. off Easy operation providing great conveniences fo your planting.
TROUBLESHOOTING Descriptions Causes/Solutions No light output. | 1. Power cord isn't connected properly or connections are loosen. + Check the power cord connections. 2. H you use the LED fixture as a stand alone the fixture should exit EXT made. 1. Dimmer switch on the LED fixture isn’t on EXTERNAL CONTROL mode. = Adjust dimmer switch to EXTERNAL CONTROL position. 2. Controller cable isn’t connected properly or connections are loosen. » Check the controller cable connections.