Product Overview

Specifi cations
11-565 Pressure Gauge Kit,
Water
11-566 Pressure Gauge Kit,
Air-Water
11-567 Pressure Gauge Kit,
Air
11-568 Pressure Gauge Kit,
Air w/Retard
11-569-00 Gauge Kit, Air-
Water, Personalized
Description
FPPI ‘s Sprinkler Gauge Kits provide everything needed to install a  re sprinkler
gauge to a riser or other device. Each kit contains a pressure gauge that is UL
Listed and FM approved for Fire Sprinkler Service, ¼ ” brass 3-way valve (UL/
ULc Listed), ¼ ” x ½ ” galvanized reducer, ¼ ” IPS x 4” galvanized pipe nipple
and a ¼ ” IPS galvanized plug. Each kit is shrink wrapped to a sturdy cardboard
backing to prevent the loss of the components before being installed at the job
site. Available with Water, Air-Water, Air or Air with Retard  re gauge.
WWW.FPPI.COM
Pressure Gauge Kits
© 2016 Fire Protection Products, Inc.
3198 LIONSHEAD AVE
CARLSBAD, CA 92010
+ 1 [phone]
+ 1 [phone]
+ 1 [phone] FAX
The information contained herein is produced in good faith and is believed to be reliable but is provided for guidance and
information purposes only. FPPI and its agents cannot assume liability or responsibility for results obtained in the use or
misuse of its product by persons whose methods and quali cations are outside and beyond our control. It is the user’s
responsibility to determine the suitability of, methods of use, preparation prior to use, and appropriate installation for
all products purchased from FPPI. It is the user’s sole responsibility to observe and adapt such precautions as may be
advisable or necessary for the protection of personnel and property in the handling and use of any of our products.