Product Overview
Specifications
Material:
Cast Brass
Size:
2½ FNPT x F Swivel*
*Available Swivels:
NST 3.0686” x 7½ TPI
BCT 3.000” x 8 TPI
CLV 3.078” x 8 TPI
DET 3.125” x 7½ TPI
ONT 3.125” x 5 TPI
PHX 3.062” x 6 TPI
QST 3.031” x 7 TPI
TEM 3.075” x 6 TPI
Check thread dimensions for
other 2½” applications.
3198 LIONSHEAD AVE
CARLSBAD, CA 92010
TEL + 1 760 599-1168
+ 1 800 344-1822
FAX + 1 800 344-3775
© 2012 Fire Protection Products, Inc.
Description
The single outlet open snoot is constructed of cast brass. The single swivel is
complete with gasket and comes standard with pin lugs. Outlet is 2½” NPT
female thread. Comes standard with 2½” NST female swivel. Kit includes: open
snoot, 2 ½” brass plug with chain, and 2½” FDC Brass Wall Plate.
Installation
Installation can be achieved with tools readily available in the eld using
common installation practices. Make sure male threads of pipe to which the
snoot is being attached are liberally coated with a pipe thread sealant such as
PipeFit Thread Sealant with PTFE or PTFE Thread Sealant Tape. Tighten the
snoot until hand tight. Tighten one additional turn past hand tight to achieve a
water tight seal of the threads. DO NOT OVER TIGHTEN! Over Tightening may
cause thread failure as well as cracking of the snoot body.
WWW.FPPI.COM
Open Snoot Assembly
FNPT x FNST* Connection