Product Overview

Speciﬁcations

Material:

Cast Aluminum

Size:

2½”

3”

Type:

Pin lug

Color:

Red

Green

Yellow

Included per set:

(2) caps

(4) eyelets

(4) nished hexnuts

Available in sets only

3198 LIONSHEAD AVE

CARLSBAD, CA 92010

TEL + 1 760 599-1168

+ 1 800 344-1822

FAX + 1 800 344-3775

Description

The Metal Breakable Caps for Fire department Connections are cast aluminum.

Each set includes two caps and 4 eyelets with nuts for 2½” swivels. The caps

have been molded with “scored” tabs for easy removal with a hydrant wrench or

other similar tool. Metal Breakable caps provide inexpensive protection against

the introduction of foreign material into the swivels but allow for quick access

when a hose connection is necessary.

Installation

Remove the caps from their packaging. Hold the breakable cap to the opening

of swivel. Align the breakable tans with the pin lugs on the swivel. Once aligned,

insert the threaded end of one eyelet through the hole in the tab of the cap then

slide the eyelet over the pin lug. Once the eyelet is in place, carefully thread the

included ¼-20 nished hexnut on to the threaded end of the eyelet until snug.

Caution: Do not overtighten. The tabs of the break caps are designed to

break with minimal force.

WWW.FPPI.COM

Fire Department Connection

Breakable Caps, Metal

PAGE 1
Fire Department Connection Breakable Caps, Metal Description The Metal Breakable Caps for Fire department Connections are cast aluminum. Each set includes two caps and 4 eyelets with nuts for 21/2” swivels. The caps have been molded with “scored” tabs for easy removal with a hydrant wrench or other similar tool. Metal Breakable caps provide inexpensive protection against the introduction of foreign material into the swivels but allow for quick access when a hose connection is necessary.