Product Overview

Specifications
Product Characteristics:
Paste
Color:
White
S Gravity:
1.15gm/cc
Viscosity:
1500000cps
Flash point:
860° F
Temp Range:
-65° F to +400° F
Storage stability at <75° F:
250 ml - 12 months
750 ml - 12 months
7 l - 6 months
Performance
Characteristics
Cure speeds:
50% - 4 hours
90% - 8 hours
100% - 24 hours
Locking Torque:
400 in. lbs (½” NPT)
Cured Seal:
10000psi Fluids
3000psi Gases
125 psi Natural Gas
Chemical Resistance:
Excellent
3198 LIONSHEAD AVE
CARLSBAD, CA 92010
TEL + 1 760 599-1168
+ 1 800 344-1822
FAX + 1 800 344-3775
© 2012 Fire Protection Products, Inc.
Description
PipeFit
®
AS Anaerobic Thread Sealant with PTFE is formulated to provide
the highest pressure resistant seal of any anaerobic compound suitable for
re sprinkler systems. PipeFit
®
AS provides lubrication during assembly
then cures to a resilient, vibration-proof polymer shim which is resistant to
corrosive chemicals, solvents and galvanic attack between dissimilar metals.
After complete cure (24 hours) the joint can be disassembled with normal pipe
working tools if required. DO NOT USE ON CPVC OR OTHER PLASTIC PIPE.
Directions
Apply PipeFit
®
AS to rst few male threads then assemble parts normally.
Cures to 50% in 4 hours, 90% in 8 hours and completely cured within 24 hours.
DO NOT USE DOPE AND TAPE TOGETHER.
Can be used on stainless steel.
WARNING: CONTAINS METHACRYLATE ESTERS Avoid eye contact or
extended skin exposure. For eye contact, immediately ush with water for 15
minutes and seek medical attention. For extended skin exposure wash contact
area thoroughly and consult a physician.
KEEP OUT OF REACH OF CHILDREN. FOR EMERGENCY SPILL
INFORMATION CONTACT CHEMTREC 1(800) 424-9300.
WWW.FPPI.COM
PipeFit
®
AS
Anaerobic Thread Sealant Paste with PTFE