Product Overview

Specifi cations
Description:
Headguard, 1-pc, 2-hk
Finishes:
Red, Chrome Plated
Item Numbers:
02-600-00 (Red)
02-605-00 (Chrome Plated)
Material:
Steel Wire - .12”
WWW.FPPI.COM
Headguard
The information contained herein is produced in good faith and is
believed to be reliable but is provided for guidance and information
purposes only. FPPI and its agents cannot assume liability or
responsibility for results obtained in the use or misuse of its product
by persons whose methods and quali cations are outside and
beyond our control. It is the user’s responsibility to determine
the suitability of, methods of use, preparation prior to use, and
appropriate installation for all products purchased from FPPI. It is
the user’s sole responsibility to observe and adapt such precautions
as may be advisable or necessary for the protection of personnel
and property in the handling and use of any of our products.
Description
The 1-pc head guards are designed to provide protection against low level impacts to
the sprinkler head. Featuring a dual hook attaching system, the head guards allow for
installation on most ½” and ¾” IPS sprinkler heads. They can also be provided with a
water shield for in-rack sprinkler heads. Available in either red or chrome  nish. Head
guards will not protect sprinkler heads from severe abuse or impact.
© 2017 Fire Protection Products, Inc.
3198 LIONSHEAD AVE
CARLSBAD, CA 92010
+ 1 [phone]
+ 1 [phone]
+ 1 [phone] FAX
1-pc 2-hk
62.75 mm / 2.47 inch
62.75 mm / 2.47 inch
22 mm / 0.87 inch
62.46 mm / 2.46 inch
62.75 mm / 2.47 inch
62.75 mm / 2.47 inch
22 mm / 0.87 inch