About the Projector Safety Instructions Please read all instructions before using the laser projector (hereinafter referred to as “the Product”) and keep them properly for further reference. 1. Instructions Make sure to read all safety and operation instructions before using the Product. 2. Notes and warnings Make sure to follow all notes and warnings in the instructions. 3. Cleaning Unplug the Product’s power plug from the wall-mounted power socket prior to cleaning.
About the Projector Notes of AC Power Line The AC power line must conform to the requirements of state (region) where the Product is used. Please confirm the type of your AC power line plug according to the following diagram and make sure to use the AC power line correctly. Please consult the dealer if the attached AC power line does not match your AC power socket. The Product is attached with grounding type AC power socket. Make sure the plug can be inserted into the power socket.
About the Projector Disclaimer All rights reserved ·Donot reprint All software and hardware of the Product are owned by the Company. No imitation, copying, extraction or translation is allowed unless otherwise permitted by the Company. The Manual has no guarantee, standpoint expression or other implications in any form. For any direct or indirect data loss, benefit loss or business termination due to the Manual or any product information in it, the Company and its staffs should not bear any liability.
Contents Contents Introduction ..................................................................................................................................... 1 Features.............................................................................................................................................. 1 List of Articles ................................................................................................................................... 2 Product Overview .......................
Features Introduction Features Based on high-performance optical engine projection technology, user-friendly design, high reliability and simple operation, the Product has the following features: •Color mode offers different options for different projectors •D-Sub 15-pin terminal can be connected to analog video •Fitted with HDMI connection, support HDCP •Correct the distorted and deformed images based on digital trapezoidal distortion correction •RS-232 interface supports serial control •Support 3D functi
About the Projector List of Articles Confirm the following objects while unpacking the projector: Projector Remote controller Power line VGA signal line User’s manual Quick tour Certificate Note • For any shortage and damage of articles or machine failure, please contact the dealer immediately. • Pleas keep the original package box and packing materials properly to protect the Product to the maximum. Please package the Product according to the original status prior to transport.
Product Overview Product Overview Appearance of projector Front and top side 1 4 3 2 7 1. Lens 2. Infrared remote sensor 3. Loudspeaker (Configured in Type FHD only) 4. Focusing lever 5. Status indicator 6. Power key 7. Signal source key Bottom and lateral side 9 10 8 8. Ventilation hole (air inlet) 11 9. Adjustment pin 10. Ceiling instalation hole 3 11.
Product Overview Backside 1 2 34 5 6 1. HDMI OUT 2. HDMI 3. MINI USB 4. RS-232 7 8 5. COMPUTER IN 6. AUDIO IN 7. AUDIO OUT 8. USB A 5V/1.5A Note •HDMI OUT applies to Type FHD only. •The Product can be supported by a lifting frame. The lifting frame is excluded in the product package.
Connection of Projector Installation Connection of projector Connection of external computer/laptop AV device USB charger Louds peake Display Computer HDMI OUT interface applies to Type FHD only Steps Steps Signal source 5
Power on/off Projector Power on/off Projector Power on projector Turn on the projector 1. Finish the wiring of AC power line and signal line of peripheral equipment. 2. Press button on control panel or “POWER” button on remote controller to power on the Product. 3. Power on the signal source (computer, laptop, DVD, etc.) to connect the extenral signal sources. The Product will have auto detection of signal sources.
Adjustment of Projector Height and Focusing Adjustment of Projector Height The Product is fitted with three adjusting pins to adjust the image height. Rotate to ascend/descend the pins to ascend or descend the images slightly. Note •Make sure the adjusting pins are fully retracted before the Product is put in the packaging box to avoid damage. Adjustment of Projector Focusing Pull the focusing adjustment ring unitl the image becomes clear.
Control Panel and Remote Controller Adjustment of Projector Image Size Diagonal of screen Screen Lens center Vertical offset Projection distance XGA Screen Size (XGA) Diagonal Projection Distance Width Height Wide Vertical Offset Distance tele inch~ cm inch cm inch cm inch m inch m inch cm 50 127 40.0 102 30.0 76 77 1.96 86 2.20 3.8 9.6 55 140 44.0 112 33.0 84 85 2.16 95 2.42 4.2 10.6 60 152 48.0 122 36.0 91 93 2.36 104 2.64 4.5 11.5 70 178 56.
Control Panel and Remote Controller Control Panel Control Panel and Remote Controller Power Power on or turn off the Product S/N Signal source Search signal source Item Power switch Switch projection proportion of image Switch to HDMI signal Switch to wireless projection Switch to VGA signal Switch signal source Fast forward Stop Fast backward Pause RESYNC Previous page OK key Up, down, left, right key Menu Next page This key has no function This key has no function Return to the previous menu Lock “up
Battery Installation Battery Installation 1. Open the battery cover according to the direction in diagram. 2. Install the battery in the chamber according to the diagram. 3. Close the battery cover. Caution •Explosion may occur if the replaced batteries have wrong type. •Please handle the waste batteries according to the instructions. •Make sure positive and negative poles are correct when installing the batteries. Note •Keep the batteries inaccessible to children.
Operation of Remote Controller Operation of Remote Controller Point the remote controller at the sensor of infrared remote control and press the button. An IR remote controller sensor is arranged in front of the Product. Hold the remote controller and keep a right angle within 30° between the remote controller and sensor, in order to acquire the normal functions of remote controller. Do not put any obstacle in front of the IR remote control sensor of the Product, to avoid blockage of infrared beam.
Steps of Operation Menu Operation The Product offers multi-language display menu to adjust the image and change the settings. Steps of operation 1. Press the menu to open OSD menu. 2. When it displays OSD, press ▲/▼ to select any function on the main menu. 3. When items of main menu are selected, press ► to submenu of function setting. 4. Press ▲/▼ to select the required items and then press ◄/► to adjust the settings. 5. Press menu key to return to the main menu or return to the previous menu. 6.
Pictures Pictures Color mode The different pictures have corresponding preset values. • Standard: Maximize the brightness of projection image. This mode applies to the environment that requires super brightness. • Computer: Maximize the purity of RGB color, in order to provide the real pictures. • Demonstration: Applies to demonstration in sunlight environment, in order to match the colors of PC and laptop. • Picture: Applies to picture browsing.
Pictures Sharpness Press ◄/► to select the required items. The image will be clearer if the value is higher, or the image will be softer if the value is lower. Gamma The relationship between the input signal source and image brightness. Enter the picture > Press ▲/▼ to select Gamma and then press ◄/► to select the settings. Brilliant Color Enter the picture > Select Brilliant Color, press ◄/► to adjust the values.
Display Display Width-height ratio Selections to make image match screen: • Auto: Adjust the image size proportionally, in order to make the horizontal width or vertical width match the Product’s natural resolution. It is wished to fully utilize the screen without adjusting the width-height ratio of source image. •4:3: Adjust the image proportionally, in order to display the image at the middle of screen with the width-height ratio of 4:3; which means, do not change the proportion during display.
Display Rim angle adjustment 1. The screen displays the OSD of 4 rim angle adjustment. 2. Select the to-be-adjusted rim angle and the selected area will become red. 3. Two angles can be adjusted. 4. Save the settings and then close OSD menu. How to reset rim edge adjustment: •Press “Enter” for 2s to reset. The screen will display “Reset claim: Are you sure to reset? Yes/Cancel”. •Rim edge adjustment will be reset if “keystone correction” is adjusted. • Rim edge adjustment applies to Type FHD only.
3D Settings 3D Settings 3D Image Format: Auto, off, frame sequential, frame encapsulation, top and bottom, abreast 3D inversion Enabled/disabled DLP Link: Enabled/disabled 17
Audio Settings Audio Settings Mute Enabled/disabled Volume Press ◄/► to adjust volume between 0 and 20.
Basic Basic Demo timer The demo timer can demonstrate time on the screen, to better control the time during demonstration. Please use this function as follows: • Select the timer interval and press ◄/► to confirm the last period. The last period can be set as 1 – 5 min and the increase rates are 1min; it can also be set as 5 – 240min, including 5, 10, 15, 20, 60, 120 and 240min. Once the timer is activated, it will be reactivated at the interval of reset timer.
Basic Image Enable/disable •The Product can display the test pattern to help you confirm the color correctness of projected image Blank timer Disabled/5min/10min/15min/20min/25min/30min •Draw the attention of audience to the demonstrator during demonstration. You can press “Blank screen” to hide the screen image. Press any key on the Product or remote controller to recover the image display. When image is hided, the lower right corner of screen will show blank display text.
Advanced Advanced HDMI setting HDMI format: RGB/TUV/auto •RGB: Change color space as RGB. •YUV: Change color space as YUV. •Auto: Set the Product to have auto detection of color space settings. HDMI range: Auto/normal/enhanced •Enhanced: Change HDMI color range as 0-255. •Normal: Change HDMI color range as 16-235. •Auto: Set the Product to have auto detection to HDMI range of input signal.
Advanced Projector Position Front projection on desk/back projection on desk/hoisting back projection/hoisting front projection •Front projection on desk: For this position, the Product is placed right in front of screen. This is the most common installation method of the Product. The installation position can be arranged quickly and it has high mobility. •Back projection on desk: For this position, the Product is placed at the back of screen.
Information Information Signal source Display the current signal source Color mode Display the modes selected in color mode menu Resolution Display the original source resolution of input signals Color system Display the input system: RGB or YUV Hardware version Display the hardware version 23
Wireless Projection Wireless Projection Search the current wireless network and enter password; finish wireless projection by referring to the equipment Main chip Supported system Operating system RK3036 Dual-core A7 up to 1.0ghz Flash 128M DDR 128M Androi Android 4.4 and above IOS IOS8 and above Windo ws Windows 8.1 and above MAC MAC 10.9 and above OS Linux Language English Support 2.
Wireless Projection Operation Guide Method 1: Projection via hot spot of projector 1. Power on the Product, enter the wireless projection interface and the default interface is as shown below. Current SSID: The default hot spot name of the Product. Current password: The default WiFi password. 2.
Wireless Projection Operation Guide iPhone: Step 1 Enter the setting menu of mobile phone and find the network name as shown in Fig. 1, enter the password and connect, as shown in diagram below: Apple computer Step 1 Connect computer WiFi to the SSID as shown in Fig. 2, enter password and connect Step 2 Find mirror image option in the drop-down menu, click screen mirror image and find the device name in the pop-up menu.
Wireless Projection Operation Guide Windows computer: Step 1 Find the network name as shown in Fig.1,enter password and click “Connect’ as shown in diagram below Step 2 Step 3 Press shortcut key Win + P to enter the projection interface, a shown in diagram below, select connection of wireless display. Find the device name shown in Fig. 2 in the pop-up connection dialogue box, click “Connect”, as shown in diagram below: Note: Window8.0 or higher version is supported.
Wireless Projection Operation Guide Step 4: Find the name of target wireless network, double click to enter the next option, as shown in the diagram Step 5: Based on the step above, enter the interface as shown in diagram below, enter the password in the Password option and click Password Step 6: The Product displays the interface as shown in diagram below. Implement projection of device, please refer to Method 1 for the details.
Wireless Projection Operation Guide iPhone Android mobile phone Windows computer Apple computer iPad Topological diagram of device connection Android tablet iPhone Android mobile phone Windows computer Hot spot of projector Apple computer iPad Android tablet PC 1. Support the interaction of multiple systems, platforms (Android, Ios and Windows) and multiple screens; 2. Support HD wireless audio/video transmission and HDMI 1.4 HD output’ 3. Support wireless connection of WiFi 802.
Maintenance Maintenance The Product should be maintained properly. Keep the lens clean; otherwise, the dust or spots will be projected on the screen and reduce the image quality. Please contact the dealer or professional technicians before replacing any part. Make sure to power off the Product and unplug the power line prior to cleaning of any part of the Product. Warning •Do not open any cover of the Product to avoid major injury due to dangerous voltage in the Product.
Specification Specification Model DLP Display system 0.55" XGA / 0.65" 1080P Resolution XGA (1024 x 768) 1080P(1920X1080) Width-height ratio Original/ 4:3/16:9/16:10 Zoom ratio 1.1x/ 1.2x Projection ratio 1.95-2.18/ 1.52-1.83 Image size (diagonal) 50" - 150" / 50" - 200" Light source Laser Input port (standard) Output port (standard) COMPUTER IN AUDIO IN USB A 5V/1.
Specification Dimensions 300mm 107mm 270mm Hoisting Installation 170mm 160mm Note: It is suggested to use M4/L7 screws to fix the project which uses M4 screw holes for hoisting.
Annex Annex Troubleshooting Please refer to the fault phenomenon and troubleshooting methods below before sending the Product for maintenance. If the problem remains, please contact the local dealer or service center. Startup If indicator lamps are off: •Make sure to firmly connect one end of power line to the Product and connect another end to the electrified power socket. •Press the power button again.
RS-232 Command and Configuration RS-232 Command and Configuration (ASCII) RS-232: 9-PIN Type D interface applies to connection of PC control system and continuous connection of the Product RS-232 (RS-232 control): Connect the Product to PC or control system to realize remote control of the Product through standard 9-pin cables (through serial cable directly).
RS-232 Command and Configuration ASCII code Function Command Power Off [POWR0] Power On [POWR1] Power read [POWR?] Color Mode_standard [DPMO0] Color Mode_computer [DPMO1] Color Mode_ Presentation [DPMO2] Color Mode_ Photo [DPMO3] Color Mode_Movie [DPMO4] Color Mode_ read [DPMO?] Brightness + [BRIG+] Brightness - [BRIG-] Brightness [BRIG***] Brightness read [BRIG?] Contrast + [CONT+] Contrast - [CONT-] Contrast [CONT***] Contrast read [CONT?] Color temp.
RS-232 Command and Configuration Function Command Tint - [TINT-] Tint [TINT***] Tint read [TINT?] Sharpness + [SHRP+] Sharpness - [SHRP-] Sharpness [SHRP**] Sharpness read [SHRP?] Gamma [GAMM*] Gamma read [GAMM?] BrilliantColor + [WHPK+] BrilliantColor - [WHPK-] BrilliantColor [WHPK**] BrilliantColor read [WHPK?] Color managemwnt Red Hue + [HGRH+] Color managemwnt Red Hue - [HGRH-] Color managemwnt Red Hue [HGRH***] Color managemwnt Red Hue read [HGRH?] Color managemwnt R
RS-232 Command and Configuration Function Command Color managemwnt Green Hue - [HGGH-] Color managemwnt Green Hue [HGGH***] Color managemwnt Green Hue read [HGGH?] Color managemwnt Green Saturation + [HGGS+] Color managemwnt Green Saturation - [HGGS-] Color managemwnt Green Saturation [HGGS***] Color managemwnt Green Saturation read [HGGS?] Color managemwnt Green Gain + [HGGG+] Color managemwnt Green Gain - [HGGG-] Color managemwnt Green Gain [HGGG***] Color managemwnt Green Gain read
RS-232 Command and Configuration Function Command return remark Color managemwnt Cyan Hue read [HGCH?] [HGCH***] ***=-99~99 Color managemwnt Cyan Saturation + [HGCS+] Color managemwnt Cyan Saturation - [HGCS-] Color managemwnt Cyan Saturation [HGCS***] Color managemwnt Cyan Saturation read [HGCS?] Color managemwnt Cyan Gain + [HGCG+] Color managemwnt Cyan Gain - [HGCG-] Color managemwnt Cyan Gain [HGCG***] Color managemwnt Cyan Gain read [HGCG?] Color managemwnt Magenta Hue + [HGMH+
RS-232 Command and Configuration Function Command Color managemwnt Yellow Saturation - [HGYS-] Color managemwnt Yellow Saturation [HGYS***] Color managemwnt Yellow Saturation read [HGYS?] Color managemwnt Yellow Gain + [HGYG+] Color managemwnt Yellow Gain - [HGYG-] Color managemwnt Yellow Gain [HGYG***] Color managemwnt Yellow Gain read [HGYG?] Reset Color Setting [CORT1] Aspect Ratio Auto [ASPR0] Aspect Ratio 4:3 [ASPR1] Aspect Ratio 16:9 [ASPR2] Aspect Ratio 16:10 [ASPR3] Aspect
RS-232 Command and Configuration Function Command Corner Left Top Y - [TLCY-] Corner Left Top Y [TLCY***] Corner Left Top Y read [TLCY?] Corner Left Bottom X + [BLCX+] Corner Left Bottom X - [BLCX-] Corner Left Bottom X [BLCX***] Corner Left Bottom X read [BLCX?] Corner Left Bottom Y + [BLCY+] Corner Left Bottom Y - [BLCY-] Corner Left Bottom Y [BLCY***] Corner Left Bottom X read [BLCY?] Corner Right Top X + [TRCX+] Corner Right Top X - [TRCX-] Corner Right Top X [TRCX***] Corn
RS-232 Command and Configuration Function Command return remark Corner Right Bottom Y read [BRCY?] [BRCX***] ***=0~200 According to the angle of DMD & Keystone & input source Position V + [VPOS+] Position V - [VPOS-] Position V [VPOS**] Position V read [VPOS?] Position H + [HPOS+] Position H - [HPOS-] Position H [HPOS**] Position H read [HPOS?] Phase + [PHAS+] Phase - [PHAS-] Phase [PHAS**] Phase read [PHAS?] H size + [CLCK+] H size - [CLCK-] H size [CLCK***] H size rea
RS-232 Command and Configuration Function Command 3D Sync Invert Off [TDIV0] 3D Sync Invert On [TDIV1] 3D Sync Invert read [TDIV?] DLP Link Off [TDDL0] DLP Link On [TDDL1] DLP Link read [TDDL?] Audio Mute [AMUT0] Audio Mute [AMUT1] Audio Mute read [AMUT?] Volumne + [VOLM+] Volume - [VOLM-] Volumne [VOLM**] Volume read [VOLM?] Timer Period [TMPR***] Timer Period read [TMPR?] Timer Display Always [TMDP0] Timer Display 3 min [TMDP1] Timer Display 2 min [TMDP2] Timer Displa
RS-232 Command and Configuration Function Command Timer Counting Direction Down [TMCD0] Timer Counting Direction Up [TMCD1] Timer Counting Direction read [TMCD?] Start Counting No [TMSC0] Start Counting Yes [TMSC1] Start Counting read [TMSC?] Pattern Off [TPRN0] Pattern On [TPRN1] Pattern read [TPRN?] Blank Timer [BLTM*] Blank Timer read [BLTM?] Message Off [MESG0] Message On [MESG1] Message read [MESG?] Splash Screen Black [SPSR0] Splash Screen Blue [SPSR1] Splash Screen D
RS-232 Command and Configuration Function Command Sleep Timer 1hr [SLTM3] Sleep Timer 2hr [SLTM4] Sleep Timer 3hr [SLTM5] Sleep Timer 4hr [SLTM6] Sleep Timer 8hr [SLTM7] Sleep Timer 12hr [SLTM8] Sleep Timer read [SLTM?] Power Saving [POSA0] Power Saving [POSA1] Power Saving read [POSA?] HDMI Format Auto [HDFM0] HDMI Format RGB [HDFM1] HDMI Format YUV [HDFM2] HDMI Format read [HDFM?] HDMI Range Auto [HDRG0] HDMI Range Normal [HDRG1] HDMI Range Enhanced [HDRG2] HDMI Range r
RS-232 Command and Configuration Function Command Language French [LANG1] Language German [LANG2] Language Italiano [LANG3] Language Spanish [LANG4] Language Russian [LANG5] Language Chinese [LANG6] Language Simple Chinese [LANG7] Language Japanese [LANG8] Language Korean [LANG9] Language Swedsh [LANG10] Language Dutch [LANG11] Language Turkish [LANG12] Language Czech [LANG13] Language Portugese [LANG14] Language Thai [LANG15] Language Polish [LANG16] Language Finnish [LAN
RS-232 Command and Configuration Function Command return remark Projector Position read [PJPS?] [PJPS*] *=0~3 Menu Display Time [MUDT*] Menu Display Time read [MUDT?] [MUDT*] *=0~5 Menu Position TOPLEFT [MUPS0] Menu Position TOPRIGHT [MUPS1] Menu Position CENTER [MUPS2] Menu Position BOTTOMLEFT [MUPS3] Menu Position BOTTOMRIGHT [MUPS4] Menu Position read [MUPS?] [MUPS*] *=0~4 High Altitude Off [HIAL0] High Altitude On [HIAL1] High Altitude read [HIAL?] [HIAL*] *=0~1 Quick
RS-232 Command and Configuration Function Command Password acitive [PINP******] Setting [KYPA1] Back [KYPA2] Home [KYPA3] Up [KYPA4] Down [KYPA5] Left [KYPA6] Right [KYPA7] Volume + [KYPA8] Volume - [KYPA9] Mute [KYPA10] Source [KYPA11] Enter [KYPA12] Auto [KYPA13] Fast Forward [KYPA14] Fast Reverse [KYPA15] Stop [KYPA16] Play Pause [KYPA17] Blank [KYPA18] FreezeKey [KYPA19] Exit [KYPA20] Menu [KYPA21] return remark ******=password 1~4 47
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.