Quick Installation Guide FL-Y5M01 WLAN USB interface Module 802.11b/g/n (1T1R) Version 1.
Product Specification Product: WLAN USB interface Module (802.11b/g/n) Model: FL-Y5M01 Power Supply Rating: 5Vdc / 500mA Modulation Type: BPSK, QPSK, 16QAM, 64QAM Modulation Technology: IEEE 802.11b: DSSS IEEE 802.11g/n:OFDM Transfer Rate: 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 150Mbps Operating Frequency: 2412 ~ 2472MHz Number of Channel: 802.11b, 802.11g, 802.11n (HT20): 13 802.11n (HT40): 7 RF power: 22.
Installing WLAN module driver This Quick Installation Guide provides you with some basic instructions only. The following instructions will guide you through overall installation procedure. In OS-specific situations, you should follow the on-screen instructions to proceed. Follow these steps below to install the WLAN module driver. Step 1: Close all Windows programs that are running Step 2: Insert the module into the USB port of your computer first.
Step 5: On your desktop, Please click Realtek USB Wireless LA.. Step 6: In the Available Network tab, select the network you would like to link to and then close this window.
Step 8: In the General tab, you can check network connection status .
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: NJCFLY5M01 ". (The other project ID: " Contains TX FCC ID: NJC- FLY5M01 ") If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules.