EMI Warning FCC Class B Certification This device complies with Part 15 of the FCC Rules, Operation is subject to the following conditions: 1 Thus device may not cause harmful inference, and 2 This device must accept any intermittence received, including reference that may cause undesired operation. Warning ! This equipment has been tested and found (© comply with the limes for a Class B digital device, pursuant © Pare 15 of the FCC Rules.
Quick Reference How to set up the Scanner ? 1. Make sure the following items are included in the package mek ED TT Senna Scanner Cable CD Bundle or = <> Quick Reference Ne” AC Bower Adapter 2. Plug the scanner cable into your PC's parapet port. printer is 10 be used, connect the printer cable into the scanner's printer port. 3. Connect one end of the AC power adapter into the scanner's power jack, : and the other end into an AC outlet. Torn on the power switch located at the right side of the scanner.
Quick Reference How to Scan? 1. Open the tid cover and then place the scan target face down aligned with the center of «i the glass (where marked "7 2, Open i Photo Plus 4. the image-editing software. (1) Under Windows 95: Click on the Start bunion and then select Programs -i Photo Plus 4 — i Photo Plus 4 {2) Under Windows 3.1: Go to Program Manager and then click twice on the i Photo Plus 4 icon. #3 To scan for the first ime. 20 to File and then select Acquire — Select Source... X File.
Quick Reference How to perform OCR? 1. Open Bridgette OCR software. {1) Under Windows 951 Click on the Start button and then select Programs .. Text Bridge Classic -. Text Bridge Classic (2) Under Windows 3.1: Go to Program Manager and then click twice on the Text Bridge Classic icon. File and then choose Read Image From Scanner. 3. Go to Site again and then choose Select Scanner Source ha i+; Choose TWAIN in the following dialog box and then click Continue. 6.
Introduction This guide shows you how to scan an image into the bundled image editing software, i Photo Plus, using TWAIN program. You can also use TWAIN to scan from any other image editing, OCR, or other programs that can accept scans, Typically, you may do so by using the familiar select source and acquire commands (various programs may use slightly different procedures.) G vetting ready Click on the Start button at the lower left comer of your PC screen.
Start scanning Before starting, first place the scan target (photo, document, or others) face down aligned with the center of the glass (where marked Close the scanner ld, making sure that the scan target does not move while you close the lid, Using TWAIN interface, Scanning is as easy as 1-2-3! 1.) Select the type of image to scan. Select Photo, Document or Magazine and Book. TWAIN program will automatically determine the best settings to use for scanning.
Contains information on how to contact us. 2. Selection Lets you select scan areas. Selection allows you to activate a specific scan area by drawing a rectangular crop frame aver the image. To adjust the size, follow instructions in "2. Scan size". Zoom Roam in or zoom out the viewing area. Zoom lets you take a more detailed took at what you are scanning. Click the Zoom button and then move the magnifying glass cursor over the area you would like to zoom in and click the left mouse button.
Remove specific active scan areas. To delete, select the specific crop frame and then click on the Delete Selection button. 7. Power Off Gimmick here to close TWAIN interface. When you want to leave the TWAIN User's Interface, click on Power Off bunion. Follow steps 2-4 from Getting ready to reopen the TWAIN interface. 8. Main preview window FEE B Displays a preview of the image to be scanned. Here you can see how your scan will appear after scanning.
Click on a specific icon and then you can activate settings recommended for that particular type of scan target: Document for black and white documents, Photo for color photos, and Magazine and Book for magazines and books with graphics. User Defined Click here to save , edit and select your preferred settings. User Defined includes three options: save current settings, edit and select previously saved settings.
Click here to scan the Image or to abort the scanning. Click on the Scan Burton after you have made all your selections. When the scanning starts, Preview/Scan icon changes into an Abort button. Press this button if you decide to cancel the scanning 15. Preview range indicator Lets you sect the range for previewing. Preview range indicator is a red A located by the left of the preview window. Tt specifies the range of the preview task, only the portion above the indicator is to be previewed. 16.
For more detail scanning, click here to customize features such as resolution, exposure time, brightness, contrast . Check Scanner If the scanner is not correctly installed, the Check Scanner button appears instead of the Preview/Scan button. See Quick Installation Guide for help.
is a display window for the settings you specify. 2. Liquid Crystal Display (LCD) box lad] Err LCD box is where you enter or adjust the value of resolution, exposure, brightness, contrast, gamma, highlight and shadow. Each digit can be adjusted individually. Press Burton to measure the vale and we decrease it. For example, when you wan: to 1) Press down ggg under digit 3 and hold undo it becomes 1. 2) Press down gg above digit 2 2nd hold until it becomes 5. 3.
5. Brightness (0 to 255 for Line Art mode and -100 to 100 for other scan modes) Brightness is the balance of light and dark shades in an image. Increasing the value creates a brighter image and vice versa. To adjust the brightness, see instructions in “2. Liquid Crystal Display (LCD) box" 6. Contrast (-100 to 100) iy Contrast is the range between the darkest and lightest shades in an image. It determines the number of shade you get.
Master and True Gray Channel Allow you to adjust the brightness, contrast, gamma, highlight and shadow of an image through four rent channels, In Color scan mode, they are Red, Green, Blue and Master Channel which allows simultaneous adjustment for red, green and blue. In Grayscale/Lineart/Halfione scan modes , they are Red, Green, Blue and True Gray Channel {for CP models only). Channel selection tip: When scanning in Gray scale, Linear or Halftone, choose True Gray channel to obtain the best scan output.
14. Remove Dark Edge When the scan target is not properly placed on the glass under the lid of the scanner, it might cause some unnecessary dark edges around the previewed image. To remove them, first select the image and then click on the Remove Dark Edge button to activate its function. When the image is scanned, these dark edges will be automatically whitened 15. Desk a) Desk function is for sheet feed scanners only. It is disabled for all {flatbed scanners. 16.