COMMAND SERIES 410-L06 | 410-T09 | 420-L06 | 420-T06 | 420-T09 | 420-T15 420-L06R | 420-009RS PRODUCT MANUAL
TABLE OF CONTENTS COMMAND REFERENCE GUIDE COMMAND & COMMAND+ TILT LIGHT HEAD INTRODUCTION Command Reference Guide 3 Physical Characteristics & Warnings 4 FOAM PADDING TILT PLATE BATTERY Battery Installation 5 Reassembling the Battery Pack 5 POWER/MODE SWITCH COMMAND RECHARGEABLE LED Charging the Battery Pack 6 Battery Life 6 OPERATION Operational Modes 7 Battery Life 7 Elastic Strap 8 Silicone Strap 9 CONTACT FOXFURY LENS COMMAND & COMMAND+ LO•PRO LIGHT HEAD POWER/MODE SWITCH T
PHYSICAL CHARACTERISTICS BATTERY Please read below before using your Command headlamp as it relays beneficial operating and safety information. P/N NAME WEIGHT (L x W x H) Command LoPro (White) 5.3” x 0.7” 1.0” (135 x 18 x 25mm) 410-T09 Command Tilt (White) 4.8” x 1.0” 1.0” (122 x 25 x 25mm) 420-L06 Command+ LoPro (White & Green) 420-T06 Command+ Tilt (White & Green) 420-T09 Command+ Tilt (White) 420-T15 Command+ Tilt (White & Amber) 9.
COMMAND RECHARGEABLE OPERATIONAL MODES CHARGING THE BATTERY PACK COMMAND TILT & COMMAND LO•PRO: (FOR P/N 420-L06R, -009RS ONLY) ON/LOW mode: Press the Power/Mode switch once. The center 2 LEDs will turn on. 1 MEDIUM mode: From LOW mode, press the Power/Mode Switch once. The center 6 LEDs will turn on. HIGH mode: From MEDIUM mode, press the Power/Mode Switch once. All 10 LEDs will turn on. COMMAND+ TILT, COMMAND+ LO•PRO, RECHARGEABLE: ON/LOW mode: Press the Power/Mode Switch once.
INSTALLING THE ELASTIC STRAP | 5 MINS (APPROX) INSTALLING THE SILICONE STRAP | 5 MINS (APPROX) (WATCH THE VIDEO: FOXFURY.COM/VIDEOS) 1 2 3 (WATCH THE VIDEO: FOXFURY.COM/VIDEOS) 1 2 3 FoxFury logo on strap should face inward for STEP 1 4 8 4 Place the headlamp on a flat surface. Position the Light Head so the Power/ Mode Switch is on the left and the LEDs face forward. NOTE: Make sure the FoxFury logo on the Battery Pack is correctly oriented before beginning.
WARRANTY AND OTHER INFORMATION PRODUCT DURABILITY 3M 3M IPX7 Meets NFPA 1971 Guidelines and can sustain exposure to 500°F (260°C) for 30 minutes (with Silicone Strap ONLY) CARE/CLEANING Your FoxFury product is a professional tool, but regular maintenance and care of your light will maximize performance for you. As needed, wash your FoxFury product using a soft washcloth, clean water and a mild soap. Be sure that both the Light Bar and Battery Pack are reassembled securely before washing.
FOXFURY.
