Product Specification Project Name Customer Customer Part No. Foxconn Part No. 802.
Revision History Date Number Editor Comments 2021-Jan-05 1.0 Kevin Yao Initial Draft 2021-Feb-04 1.1 Cathy Kuo Updated FCC and IC statement from page 11 to 18 RESTRICTED AND CONFIDENTIAL INFORMATION STATEMENT All information contained in this document is the exclusive property of Foxconn Technology Inc. and its development partners. Any reproduction or disclosure of all or part of this document without the expressed written consent of Foxconn Technology Inc. is strictly prohibited.
CHAPTER 1. MODULE OVERVIEW The Foxconn WFU032-VZ WLAN module contains the MTK® MT7603U single-chip which is a highly integrated Wi-Fi single chip which supports 300 Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE 802.11 b/g standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.
1-2 Pin Definition Figure 1 Pin Definitions (Module Top View) Table 1 Pin Definitions Pin number 1 2 3 4 5 6 7 8 9 10 Symbol name VBUS VBUS BGF_INT_B GND GND U2DU2D+ GND WIFI_INT_B PMU_EN Type Power Power I/O GND GND I/O I/O GND I/O I/O Pin description DC 5V DC 5V BT_wake on Ground Ground USB data USB data + Ground Wi-Fi_wake on reset 3
CHAPTER 2. ELECTRICAL AND RF SPECIFICATION 2-1 Recommended Operation Rating Table 2 Operation Rating Condition Min Typ. Max. Unit VDD 5 4.5 5 5.
2-3 WLAN RF Specification – TX Table 4 IEEE 802.11 b/g/n TX Output Power (WLAN0 & WLAN1) Data Rate (Mbps) Modulation Tx Typical Data Rate Power (dBm) (Mbps) Modulation Tx Typical Power (dBm) 1 DBPSK 14 HT20-MCS0 BPSK 7 2 DQPSK 14 HT20-MCS1 BPSK 7 5.
2-4 WLAN RF Specification – RX Table 5 IEEE 802.11 b/g/n RX Sensitivity (WLAN0 & WLAN1) Data Rate (Mbps Rx Sensitivity Modulation ) (dBm) Rx Sensitivity Data Rate Max. Typ. (Mbps) Modulation (dBm) Max. Typ. 1 DBPSK -83 -94 HT20-7.22 BPSK -82 -89.5 2 DQPSK -80 -93 HT20-14.44 QPSK -79 -86 5.5 CCK -83 -91 HT20-21.67 QPSK -77 -84 11 CCK -80 -88 HT20-28.89 16-QAM -74 -81.5 6 OFDM -85 -90 HT20-43.33 16-QAM -70 -78 9 OFDM -84 -88 HT20-57.78 64-QAM -66 -73.
2-5 Environment Specifications Operating Conditions (preliminary) Operation Temperature : 0 ~ 60℃ Storage Conditions (preliminary) Non-Operation Temperature : -10 ~ 60℃ (Typ.
CHAPTER 3.
3-2 Module Photo Figure 3 Top Side Photo Figure 4 Bottom Side Photo 9
3-3 Label Specification Figure 5 Label Specification 10
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance, the following conditions must be strictly followed when using this certified module: KDB 996369 D03 OEM Manual v01 rule sections: 2.2 List of applicable FCC rules This module has been tested for compliance to FCC Part 15C 2.3 Summarize the specific operational use conditions The module is tested for standalone mobile RF exposure use condition.
2.8 Label and compliance information The final end product must be labeled in a visible area with the following: “Contains FCC ID: RX3-WFU032VZ. The grantee's FCC ID can be used only when all FCC compliance requirements are met. 2.
OEM/Host manufacturer responsibilities OEM/Host manufacturers are ultimately responsible for the compliance of the Host and Module. The final product must be reassessed against all the essential requirements of the FCC rule such as FCC Part 15 Subpart B before it can be placed on the US market. This includes reassessing the transmitter module for compliance with the Radio and EMF essential requirements of the FCC rules.
Industry Canada statement This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
Déclaration d'Industrie Canada Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel.
