Wi-Fi Pull Cord Sensor FS-PCS200 Quick Start Guide
What’s in the Box Wi-Fi Pull Cord Sensor FS-PCS200 Quick Start Guide Wi-Fi Pull Cord Sensor Cord 3 AAA Batteries Mounting Tape Quick Start Guide
Safety Instructions • Practice safe installation habits while installing the Pull Cord Sensor. • Do not tamper with or make any modifications to your Pull Cord Sensor. • Make sure you replace batteries with 3 new AAA alkaline batteries. Insert batteries in the correct polarity as shown inside the battery case. • Properly dispose of old batteries in accordance with local regulations. Do not discard with any other household waste. • Keep batteries away from small children and pets.
Wi-Fi Pull Cord Sensor Installation and App Setup 1. Download the FS Home App from the App Store or Google Play. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. 2. Connect your smartphone or tablet to the 2.4GHz Wi-Fi network you want to connect your Fox & Summit sensor to.
3. Launch FS Home App. 4. Sign up for an account or Login with your email or password. 5. Go to "Device" and press "+" in the upper right-hand of the screen and follow the on-screen pairing instructions Make sure your phone is connected to a 2.4GHz Wi-Fi network Wi-Fi NAME •••••••• Important: Ensure that the network name or SSID is the YOUR WIRELESS_2.4G desiredYOUR network you want the devices to use.
7. Open the battery cover by sliding the back cover to the right. 8. Scan the device QR-Code/UID below or on the device itself with your smartphone or tablet or enter it manually. Device QR-Code UID Model: FS-PCS200 UID:FXXXXXXXXXXXXXXXX FCC ID: 2AR57-PCS-F 3 x AAA Batteries Made in China OR Slide to open Top 9. Insert 3 new AAA batteries. Make sure you insert the batteries in the correct polarity. Press and hold the round button until a tone is heard.
10. Press "Pair" in the FS Home App within 10 seconds of hearing the tone or seeing the LED flash. Important: When pairing is successful, a new device will be added to your Device page. If unsuccessful, repeat from Step 5 but there is no need to remove the batteries. 11. Install the Wi-Fi Pull Cord Sensor anywhere in your home with the included mounting tape.
Troubleshooting 1. Pairing Unsuccessful a. Make sure that your smartphone or tablet is connected to the desired Wi-Fi network. b. Make sure that the Wi-Fi network your smartphone or tablet is connected to is a 2.4GHz network, not a 5GHz network. This is only necessary when pairing. c. Make sure that the Wi-Fi signal is strong at the desired installation location. d. Unplug or power down other Wi-Fi devices to minimize wireless interference during setup. e.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
--Consult the dealer or an experienced radio/TV technician for help. CE marking on this product represents the product is in compliance with all directives that are applicable to it. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Battery Safety Information Caution: Keep batteries away from small children. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries promptly in accordance with local regulations. WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov. WARNING: STRANGULATION HAZARD: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft away). WARNING: This device is only intended to notify if the cord is pulled.
ML-PCS200 V.01 01/2019 Fox & Summit USA, LLC | 888.606.1589 | www.foxandsummit.com © 2019 Fox & Summit USA LLC. All Rights Reserved.
