Quick Start Guide
3.
Launch
FS Home App.
4.
Sign up
for an account or
Login
with your email or password.
5.
Go to "Device" and press "+" in the upper right-hand of the
screen and follow the on-screen pairing instructions
8.
Scan
the device QR-Code/UID below or on the device itself with
your smartphone or tablet or enter it manually.
7. Open the battery cover by sliding the back cover to the right.
11. Install the Wi-Fi Vibration Sensor onto the desired location with the
included mounting tape.
6. Enter your Wi-Fi network password.
Wi-Fi NAME
••••••••
Or you may input QR code manually:
Tap to scan QR Code
Make sure your phone is connected
to a 2.4GHz Wi-Fi network
YOUR WIRELESS_2.4G
YOUR WIRELESS_5G
Mounting Tape
10. Press "
Pair
" in the FS Home App within 10 seconds of hearing the
tone or seeing the LED ash.
9. Insert 3 new AAA batteries. Make sure you insert the batteries in the
correct polarity. Press and hold the round button until a tone is
heard. If you do not hear a tone, look for the LED to turn
ON
for 2
seconds. The sensor will now enter “Pairing Mode”.
Model: FS-VS200
UID:FXXXXXXXXXXXXXXXX
FCC ID: 2AR57-VS-F
3 x AAA Batteries
Made in China
Slide to open
Wi-Fi Vibration Sensor
FS-VS200
Quick Start Guide
ML-VS200 V.01 01/2019
What’s in the Box
App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
Wi-Fi Vibration Sensor Quick Start Guide
3 AAA Batteries
Wi-Fi Vibration Sensor Installation and App Setup
1. Download the FS Home App from the App Store or Google Play.
Safety Instructions
• Practice safe installation habits while installing the Vibration Sensor.
• Do not tamper with or make any modications to your Vibration
Sensor.
• Make sure you replace batteries with 3 new AAA alkaline batteries.
Insert batteries in the correct polarity as shown inside the battery case.
• Properly dispose of old batteries in accordance with local regulations.
Do not discard batteries with any other household waste.
• Keep batteries away from small children and pets.
• Use only a dry cloth when cleaning your Vibration Sensor.
• Do not install your Vibration Sensor near any heat source or any home
equipment that produces heat.
Wi-Fi Operation Warnings
• Always check that your smartphone or tablet OS and FS Home App
is running the most up-to-date version.
• Check that your Wi-Fi router is working properly and operates on
802.11b/g/n 2.4GHz with WPA/WPA2 encryption. The App does not
support any other network encryptions.
• DO NOT use a 5GHz Wi-Fi network.
Important: Ensure that the network name or SSID is the
desired network you want the devices to use. If it is dierent
from your smartphone’s Wi-Fi settings, please try to connect
your smart phone with the desired network rst.
Fox & Summit USA, LLC | 888.606.1589 | www.foxandsummit.com
© 2019 Fox & Summit USA LLC. All Rights Reserved.
Wi-Fi Vibration Sensor
FS-VS200
Quick Start Guide
Troubleshooting
1. Pairing Unsuccessful
a. Make sure that your smartphone or tablet is connected
to the desired Wi-Fi network.
b. Make sure that the Wi-Fi network your smartphone or
tablet is connected to is a 2.4GHz network, not a 5GHz
network. This is only necessary when pairing.
c. Make sure that the Wi-Fi signal is strong at the desired
installation location.
d. Unplug or power down other Wi-Fi devices to minimize
wireless interference during setup.
e. Double check that you are entering the correct Wi-Fi
network password.
2. Doesn’t work properly | Signal Loss
a. Check that your Fox & Summit device location is within
Wi-Fi range.
b. Depending on your device’s location, using a Wi-Fi
range extender may be necessary.
c. Check that your Wi-Fi router is working properly.
Consult the manufacturer of your Wi-Fi router for more
information.
For more product help and support visit:
www.foxandsummit.com/apps/help-center
Important:
When pairing is successful, a new device will be
added to your Device page. If unsuccessful, repeat from Step 5
but there is no need to remove the batteries.
2. Connect your smartphone or tablet to the 2.4GHz Wi-Fi network you
want to connect your Fox & Summit sensor to.
Your Wi-Fi RouterYour Smartphone
Top
OR
Device QR-Code
UID
Button
LED
--Consult the dealer or an experienced radio/TV technician for help.
CE marking on this product represents the product is in compliance
with all directives that are applicable to it.
Correct Disposal of this product
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm
to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return
and collection systems or contact the retailer where the product was
purchased. They can take this product for environment safe recycling.
This device complies with Part 15 of the FCC Rules.Operation is subject
to the following two conditions :
(1)this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Please note that changes or modications not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment. NOTE: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna. --Increase the separation
between the equipment and receiver. --Connect the equipment into
an outlet on a circuit dierent from that to which the receiver is
Battery Safety Information
Caution: Keep batteries away from small children. Risk of explosion if
battery is replaced by an incorrect type. Dispose of used batteries
promptly in accordance with local regulations.
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov.
Die Line
Fold
Notes