Measurement Guide

How-to-Measure Guide
KEY
“A” = Total width of patio cover
“B” = Total projection of patio cover
“C” = Eave overhang
“D” = Total projection from eave
“E” = Patio cover height
If mounting to a house wall
Measure the distance from the back wall
of the building to the outside edge of the
desired area (“B”). “B” will be the total
projection of the patio cover.
Measure the width of the area to covered (“A”).
Round to the nearest even foot increment.
“A” will be the total width of the patio cover.
If attaching to the existing eave
Measure the distance from the wall to the
outside of the eave (“C”). Subtract “C” from
“B” (distance from the back wall to the
Outside edge) to arrive at the measurement
(“D”). “D” will be the total projection of the
patio cover.
-OR-
10’ tall posts to be cut to desired height (“E”).
Posts are evenly spaced across total width (“A”).