How to Guide

PRODUCT DESCRIPTION
BENEFITS/FEATURES
SUGGESTED APPLICATIONS
TECHNICAL INFORMATION
COVERAGE
SHELF LIFE
PACKAGING
The Armor WB25 is a water-based acrylic cure and seal designed to seal and protect concrete and paver surfaces with a durable
high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The
Armor WB25 also doubles as a cure and seal and can be applied to new concrete.
Solids………………………………………………25%
Drying Time……………………………………….1-2 hours
Re-Coat Time…………...…………………………6-8 hours
Foot Traffic..............................................................24 hours
Wheel Traffic...........................................................24 - 48 hours
Application Temp....................................................45°F - 85°F
When properly sealed and stored, the shelf life of the Armor WB25 is up to 1 year.
The Armor WB25 is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
Porous Surfaces: Up to 175 FT2/gallon in one coat.
Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.
Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The
above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance.
Wet Appearance.......................................Milky White
Dry Appearance........................................High Gloss
VOC Content............................................Low VOC
Blush Resistance.......................................Good
Solvent Resistance………………………Superior
Concrete Adhesion....................................Excellent
Armor WB25 Water Based High Gloss Acrylic Sealer
Foundation Armor
3 Howe Drive, Suite 2
Amherst, NH 03031
[phone]
FoundationArmor.com
For Professional Use
 Provides a long-lasting, non-yellowing high gloss finish
 Reduces deterioration caused by surface abrasion
 Reduces the formation of mold, mildew, and algae
 Reduces the formation of efflorescence
 Reduces surface stains
 Breathable
 Made from US Manufactured non-recycled resins
 Will darken the surface to make it look wet
 Can be applied to unsealed surfaces, and surfaces previously
sealed with a solvent based acrylic sealer
 Poured, broom finished, and stamped concrete.
 Concrete pavers.
 Exposed aggregate concrete.
 Driveways, walkways, and stairs.
 Pool decks and patios.
 Garage, warehouse, and basement floors.
 Car ports, pole barns, retail and restaurant floors.
COMPLIANCES
 ASTM C 1315, Type 1, Class A
 ASTM C 309, Type 1, Class A & B
 AASHTO Specification M-148, Type 1, Class A & B
 Dried Coating is USDA Accepted