How to Guide

PRODUCT DESCRIPTION
BENEFITS/FEATURES
SUGGESTED APPLICATIONS
TECHNICAL INFORMATION
COVERAGE
SHELF LIFE
PACKAGING
The Armor LV25 is a solvent-based high gloss acrylic cure and seal designed to enhance, seal, and protect concrete and paver
surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss
surface film. Color packs are available and can be mixed in to provide an opaque-colored gloss finish. Non-slip additives are also
available.
Solids………………………………………………25%
Drying Time……………………………………….1-2 hours
Re-Coat Time…………...…………………………24 hours
Foot Traffic..............................................................24 hours
Wheel Traffic...........................................................24 - 48 hours
Application Temp....................................................45°F - 85°F
When properly sealed and stored, the shelf life of the Armor LV25 is up to 1 year.
The Armor LV25 is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
Porous Surfaces: Up to 175 FT2/gallon in one coat.
Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.
Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The
above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance.
Wet Appearance.......................................Clear
Dry Appearance........................................High Gloss
VOC Content............................................Low VOC
Blush Resistance.......................................Good
Solvent Resistance....................................Minimal
Concrete Adhesion....................................Excellent
Armor LV25 High Gloss Acrylic Cure and Seale
Foundation Armor
3 Howe Drive, Suite 2
Amherst NH 03031
[phone]
FoundationArmor.com
For Professional Use
 Breathable, UV resistant
 Reduces deterioration caused by surface abrasion
 Reduces the formation of mold, mildew, and algae
 Reduces surface stains
 Meets ASTM 1315 and ASTM C 309 standards
 Easy to apply, maintain, and recoat
 Made from US Manufactured non-recycled resins
 Will darken the surface to make it look wet
 Can be applied to unsealed surfaces, and surfaces previously
sealed with a solvent based acrylic sealer
 Poured, broom finished, and stamped concrete.
 Concrete pavers.
 Exposed aggregate concrete.
 Driveways, walkways, patios, and stairs.
 Salt water and fresh water pool decks.
 Garage, warehouse, and basement floors.
 Car ports, pole barns, retail and restaurant floors.
COMPLIANCES
 ASTM C 1315, Type 1, Class A
 ASTM C 309, Type 1, Class A & B
 AASHTO Specification M-148, Type 1, Class A & B
 USDA Compliant