User Manual

1.
2.
3.
Fotodiox Pro Autofocus 2x Teleconverter
Quick Start Manual
1. Fotodiox EF/EF-s Body Cap
2. Fotodiox 2x Teleconverter
3. Fotodiox EF/EF-s Rear Lens Cap
1. Be sure to have **camera and lens ready. Remove all
protecve caps from the teleconverter. Idenfy the top
and boom of the teleconverter.
**Make sure camera is off and that the lens in use has a
maximum f-stop of f/4 or greater.
3. Line the RED dot located on the boom of the adapter
to the RED dot on your Canon camera and mount as if
normal Canon Lens.
From here you are ready to shoot! Turn camera on and
begin shoong.
Please Note:
A maximum aperture of f/4 or greater is required in order to fully ulize the autofocus
capabilies. Please be aware that AF will work properly only if there is enough light and contrast
on the subject to acvate the camera's AF sensors. Manual focusing is recommended when using
lenses with a smaller open f-stop value than those given above.
For tech support, damaged/defects, or warranty please contact our techs:
[e-mail]
2. To use adapter begin by mounng the Canon lens to
the adapter by lining up the RED dot on the rear of your
lens to the RED dot on the top of the adapter and mount
unl you hear a click.
Some Canon lenses will have a WHITE square. If your
lens has this simply align the White square to the WHITE
square on the adapter and mount.
Top
Boom