Owner’s Manual HP-A3 32bit DAC
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Table of contents Supplied accessories The following are supplied with the HP-A3. • USB cable x 1 • Rubber feet x 4 • Owner’s manual (this manual) Safety instructions. . . . . . . . . . . . . . . . . . . E-2 Table of contents. . . . . . . . . . . . . . . . . . . . E-3 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . E-3 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3 Supplied accessories . . . . . . . . . . . . . . . . E-3 About power supply . . . . . . . . . . . . . .
- Consult the dealer or an experienced radio/TV technician for help. 4. Compliance with Part 15 of FCC Rules and Canadian ICES-003. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that many cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003.
Computer connection and settings When you use your computer as the input source of the HP-A3, you need to make sound output setting appropriately. Basic computer setting The following describes how to set the HP-A3 as the device for sound output of a computer for each OS. : When you use an external digital device as the input source, you do not need to make sound setting of your computer, however, USB connection is required to power the HP-A3.
Computer connection and settings • Windows Vista Detail settings 1) Select “Hardware and Sound” from the Control panel. By making sound output settings on a computer appropriately, you may be able to monitor the sound better. Depending on a computer OS, the setting window differs. The following briefly introduces the setting window for each OS. See the computer manual or help screen for details. 2) Select “Sound” to open the “Sound” window. 3) Select “Playback” tab.
Connection example HP-A3 settings [INPUT SEL] switch setting Headphones • To monitor a signal from your computer, set this switch to “USB”. • To monitor a signal from an external audio device, set this switch to “OPTICAL”. [OUTPUT SEL] switch setting • To monitor a signal via headphones, set this switch to “PHONES”. • To monitor a signal via an amplifier/speaker system, set this switch to “RCA”.
Declaration of EC Directive This equipment is compatible with the EMC Directive (2004/108/EC) - Directive on approximation of member nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/EEC) - Directive on approximation of member nation's ordinance concerning electric equipment designed to be used within the specified voltage range.