User Manual

ManualsBrandsFossil Group ManualsElectronicsCaller ID watch with Bluetooth

Caller ID Watch

Congratulations on your purchase of the Caller ID watch with

Bluetooth® wireless technology.

With the Caller ID watch you are notiﬁed when your phone rings and

when you receive a text message. A previously saved name or number of

the caller is displayed and you can mute or reject incoming calls.*

You can also use the watch to keep track of time and date in the phone.

The watch is waterproof down to 30 meters.

*Visit www.fossil.com or www.abacuswatches.com for an overview of

which phone models support the Caller ID watch. Not all phones will

allow the functionalities listed above.

Watch Overview

Top key

Crown

Bottom key

Display

Icons

Status icons

Incoming call

Incoming phone call muted in the phone

Message received

Bluetooth® function on, no connection to phone

Bluetooth® function on, watch connected to phone

Bluetooth® function connecting

Bluetooth® function off

Battery level low, Bluetooth® function off

Battery level

Battery charging

Pairing succeeded

Watch is out of range of the phone, or connection cannot be

established

Watch in pairing mode

Setting icons

Bluetooth® function on

Bluetooth® function off

Message notiﬁcation on

Message notiﬁcation off

Out of range notiﬁcation on

Out of range notiﬁcation off

Start pairing mode

Summary of content (6 pages)

PAGE 1
Caller ID Watch Icons Congratulations on your purchase of the Caller ID watch with Bluetooth® wireless technology. Status icons With the Caller ID watch you are notified when your phone rings and when you receive a text message. A previously saved name or number of the caller is displayed and you can mute or reject incoming calls.* You can also use the watch to keep track of time and date in the phone.
PAGE 2
Getting Started Setting the time Kit content To set the time Before you start using the watch, make sure the following items are in the box: • AC charger • Charging clip • The Caller ID watch Gently pull out the crown and rotate it to set the time. Push the crown back in when the time is set. ¢Q The Bluetooth® function Charging Make sure your watch battery is fully charged. The Bluetooth® function makes wireless connection to your phone possible.
PAGE 3
To turn the Bluetooth® function off Press and hold the bottom key. If the pairing is successful, the pairing icon appears and the watch vibrates. appears. ° To check if the Bluetooth® function is on Press the bottom key. If Bluetooth® function on. shows, press the top key to turn the If the pairing fails, you need to set the watch to pairing mode, and repeat step 5. Pairing Mode Your watch has to be paired with your phone before you can use it.
PAGE 4
Battery status To mute an incoming call Press the top key. To check the watch battery status Press the top key. ° ° To reject an incoming call Press the top key twice. Date °° 2006/09/13 To check the phone date Press the top key once. The watch battery status is also shown. Time To check the phone time Press the top key twice. The phone time, watch battery status and Bluetooth® function status are also shown.
PAGE 5
Out of range The watch vibrates and the of range. icon appears when the phone is out Battery capacity The watch continues searching for the phone for 30 minutes. We recommend that your watch and phone are within a range of 2 meters. The connection may be improved if there are no solid objects between your watch and phone. To turn out of range notification off 1. Press the bottom key repeatedly to select 2. Press the top key. appears. 3. Repeat to turn the notification on again. Troubleshooting .
PAGE 6
Declaration of Conformity We, Fossil Partners LP of 2280 N. Greenville Road Richardson, TX 75081 declare under our sole responsibility that our product Caller ID Watch to which this declaration relates is in conformity with the appropriate standards EN 300 328, EN 301 489-17, EN 301 489-7 and EN 60950 following the provisions of Radio Equipment and Telecommunication Equipment directive 1999/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC.