1. About Model A1 1.1 Functions Introduction a. 4K Ultra-clear Video Equipped with a powerful NOVATEK chip, A1 can record videos up to 4K (3840×2160). We suggest you choose a high-speed SD card (Class 10) with large storage space. A1 can support an SD card up to 128GB. b. Wi-Fi and APP Connect The built-in wireless signal transmitter of A1 forms a local area network within 5 meters(Limit distance). 3 meters is the best distance for signal reception.
achieve this function, please purchase the hardwire kit (not included in package). f. Loop Record The Loop recording video can be set the timing 1 min, 3 mins or 5 mins. It will overwrite the oldest unprotected video with the lasted footage, make space for your memory card. g. Auto Lock the Vital Video in An Accident When a severe bump happens to your vehicles, the current video will be automatically locked and protected in the memory card, becomes unable to overwrite by the loop recording. 1.
1.
NO. Content 1 Menu 2 Up 3 Down 3 4 5 6 7 Wi-Fi 8 OK Kit Lens Screen Reset Hole Sticker 9 10 11 SD Slot Power 12 AV 13 Type-C Description 1.Press to enter setting 2.Long press to enter picture mode 3.Long press twice to enter playback mode Upwards 1.Downwards 2.In video mode,short press to turn on/off the audio Long press to turn on/off Wi-Fi Press to confirm Removable power supply base Adjustable lens up and down 3.
1.4 Power Supply a. For daily recording, A1 camera need powered by an external power, please connect the A1 to your cigarette lighter by the car charger. Note that: When without an external power supply, the battery will be drained quickly if you turn on the WiFi mode in this situation (not suggest). b. With an 200mah internal battery, you can remove the camera from the base then operate the dashcam for 5-8 mins after it is full charged (with the WiFi function off). c.
1.5 Package Content A1 Reset Needle Car Charger Stickers User Manual Warranty Card 2. Start to use 2.1 Format the SD card on Computer a. b. c. d. Insert the SD card to the SD card adapter. Insert the SD card adapter to your computer. Click on the icon (My Computer) and select your SD card. Right-click to format. 2.2 Insert the SD card into the A1 **Please pay attention to the right SD card insert orientation.
2.3 Install the A1 to your car US Customers UK Customers a. Tear off the lens film and screen film. b. Install A1 in a suitable position on the front windshield (please choose a position that does not block the drive sight), and wipe the selected position with a paper towel. c. Adjust the lens to get the best recording angle. d. Run the cable as the images show. **More details of installation, please scan the QR code and refer to the guidance video.
2.4 Adjust the lens angle to get the best view Note: To achieve discreet design, the screen has limited size, you can only view the limited area of the video. The whole size of image will be shown on your cellphone or PC. 2.5 Format the SD card via A1 a. b. c. Double press Menu button to enter the system. Press Down button to choose the “Format”. Press OK to confirm formatting.
3. Wi-Fi Connection 3.1 TimaCam Download For iOS users, please search” TimaCam” on App Store For Android users, please search” TimaCam” on Google Play store.
3.2 Connect the Wi-Fi a. b. c. d. e. f. Long press the Down button to open the Wi-Fi signal. Open the smart phone WIFI and search for the device in the WIFI network, the name is CarDV*** Enter the password (default password: 12345678) for the first connection. Wait for the phone to connect properly. Once the connection is complete, the A1 screen shows” Wi-Fi Connected”.
3.3 APP Interface Note: 1.Any operation, press” Stop record” first. 2.In order to play the video more smoothly, please download the video to the local album first.
3.4 Wi-Fi Trouble shooting PROBLEMS My phone has searched the WiFi of the A1 but unable to connect? SOLUTION 1. Make sure no other device or phone is connected to the A1 Wi-Fi. The A1 does not support connection with multiple devices at the same time. 2.Disconnect the Wi-Fi and reconnect again. 3. Please restart your phone and try again. 4. Reset the A1 if the above step does not work. Can’t connect two phones at once? One Wi-Fi of A1 can only support one phone to connect.
PROBLEMS SOLUTION I can’t connect the internet when I connect this Wi-Fi? This Wi-Fi is only used for data transfer of A1 and mobile phone, it can't access the Internet. File download speed is very slow in app? How to reset Wi-Fi password? The download speed depends on the files size and the interference situation, please give it some minutes to finish. You can change the Wi-Fi name and WiFi password in TimaCam setting. 4. A1 Setting 4.
4.2 Video Mode Interface a. b. c. d. e. f. g. h. i. j. k. In video mode WDR ON (turn on/off in video mode setting) Wi-Fi OFF (Long Press the Down button to open the Wi-Fi) Lock status (in record status, press the mode button to lock the current video) When in recording, it shows the recording time; when quit recording, it shows the remain recording time. Video resolution (can change it in video mode setting).
4.4 Picture Mode Interface a. b. c. d. e. In picture mode Time-lapse picture time (can change on picture mode setting) Picture file name Value of exposure (can change on picture mode setting) Image size (can change on picture mode setting) 4.5 Playback Mode Setting **Long press the Menu button to enter playback mode when in picture mode - Delete (Delete Current/Delete All) - Protect (Lock Current/Unlock Current/Lock All/Unlock All) - Slide Show(2s/5s/8s) 4.6 Playback Mode Interface a. b. c. d. e. f.
4.7 System Setting - Wi-Fi (Off/On) Long press the Down button to turn off the Wi-Fi - License plate number - Date/Time - Auto Power Off (Off/1min/3mins/5mins) - Auto LCD (Off/10s/30s/1min) - Language - Time Zone - Daylight saving time (Off/On) - Beep Sound (Off/On) - Volume (1/2/3/4/5) - Frequency (50Hz/60Hz) - Format - Default Setting - Version 5. Trouble Shooting PROBLEMS The view angle is fixed. You can adjust the lens up and down to get the best view angle.
PROBLEMS SULUTION The A1 is no response. Please reset the A1. (the reset needle is in package) Cannot remove the SD card. With the card previously installed, you now need to push the card further inwards slightly, using your finger nail, until you hear and feel a small latch. Use the edge of a small coin if you have difficulty. Release pressure and the card will spring out sufficiently for you to take hold of it. The SD card cannot be read.
PROBLEMS SOLUTION I take out the A1 from the kit without connecting to power, and it shut down after 25 mins. The build-in battery can only support 20-30mins use time without external battery. After you operating it, please connect it to the cigarette lighter by car charger. Find the A1 a little heated after a period time of use. The camera has metal frame with good thermal conductivity for extended life of cam.
ANY PROBLEMS, please contact our technical team via email below, we will support 7x24 professional customer support. (12 months warranty guarantee) Here is the E-mail address: US Customers: support-us@peztio.com EU Customers: support-eu@peztio.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.