Specifications

ManualsBrandsFoshan Huazhao Electronics ManualsElectronicsLED Ambient light Bluetooth

Table Of Contents

Instruction for

Instruction for

HZ50-Bluetooth

1. Function Decscription

This module is used for car dream color led strips，which

supports “brake“，”turn left”,”turn right”mode.There

are two outputs,which control left strip and right strip

individually.

This module can be controlled by Magic “LotusLantern”

APP which comply with Bluetooth 5.1.This App supports

android and ios system。More detail about “LotusLantern”

APP refer to 《LotusLantern APP Manual》 please。

2. Specification

 INPUT VOLTAGE: DC11-13V

 STATIC CURRENT: 10ma

 MAX CURRENT: 6A



WORK TEMPERATURE:-20℃~+80℃



DIMEMSION:L50XW31.3XH5.2MM

Summary of content (8 pages)

PAGE 1
Instruction for HZ50-Bluetooth 1. Function Decscription This module is used for car dream color led strips，which supports “brake“，”turn left”,”turn right”mode.There are two outputs,which control left strip and right strip individually. This module can be controlled by Magic “LotusLantern” APP which comply with Bluetooth 5.1.This App supports android and ios system。More detail about “LotusLantern” APP refer to 《LotusLantern APP Manual》 please。 2.
PAGE 2
3. Interface No.
PAGE 3
FCC WARNING FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 4
antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. The final end product must be labelled in a visible area with the following: “Contains Transmitter Module 2A8CK-HZ50B” The module can be used for Bluetooth Module with 2.51dBi antenna.
PAGE 5
Requirement per KDB996369 D03 2.2 List of applicable FCC rules List the FCC rules that are applicable to the modular transmitter. These are the rules that specifically establish the bands of operation, the power, spurious emissions, and operating fundamental frequencies. DO NOT list compliance to unintentional-radiator rules (Part 15 Subpart B) since that is not a condition of a module grant that is extended to a host manufacturer. See alsoSection 2.
PAGE 6
shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation. The alternative method could include that the limited module manufacturer reviews detailed test data or host designs prior to giving the host manufacturer approval. This limited module procedure is also applicable for RF exposure evaluation when it is necessary to demonstrate compliance in a specific host.
PAGE 7
identify the antenna types (monopole, PIFA, dipole, etc. (note that for example an “omni-directional antenna” is not considered to be a specific “antenna type”)). For situations where the host product manufacturer is responsible for an external connector, for example with an RF pin and antenna trace design, the integration instructions shall inform the installer that unique antenna connector must be used on the Part 15 authorized transmitters used in the host product.
PAGE 8
can increase the utility of our modular transmitters by providing instructions that simulates or characterizes a connection by enabling a transmitter. 2.10 Additional testing, Part 15 Subpart Bdisclaimer The grantee should include a statement that the modular transmitter is only FCC authorized for the specific rule parts (i.e.