Instruction Manual
『Non-contact IR Temp Measurement』
Instruction manual
Model : FOSC-1000T
Infrared pointer
Power on : long press button
When scanning : press the button
1. Introduction
Compact, sturdy and convenient to use. Just aim and push the button,
the surface temperature of the measurement object can be read
within 1 second. Measure the surface temperature of an object
without direct contact.
2. How it works
① Open the battery cover and insert the battery
(Pay attention to polarity)
② Turn on the power by pressing the button
③ Display “Lo“ character on screen
④ Scan by pressing the button with the infrared pointer on the
object to be measured
⑤ Keep reading for 5 seconds
⑥ Press the button again to scan again
The front
The back
3.3. Main specifications
4. Specifications and features
① As the distance from the object to be measured increases,
the size of the measurement focus increases and the accuracy.
decreases. (Maintain an appropriate distance of 3-10cm)
② The object to be measured must be larger than the focus size.
The smaller the object, the shorter the measurement distance.
5. Additional Options
① Transition from Celsius(℃) ↔ to Fahrenheit(℉).
*Press the button for 3 seconds while the power is on.
② Automatic storage and inquiry of 20 measurements.
*Press the button 3 times in a row while the power is on.
6. Cautions
① Do not use solvent to clean the lens.
② Do not immerse the product in water.
③ If sudden temperature change occurs, it takes about an hour
for the product to stabilize.
④ Do not place the product near high temperature objects or
EMF (electromagnetic field) arc welding machines or
induction heaters.
⑤ This product is not a medical device
Warning: Do not point the infrared pointer directly or indirectly at your eyes
Operating
temp
33~42.9℃
Weight
80g(Battery included)
Measuring
Time
1second
Use
Environment
4~40℃,
Relative humidity≤85%
Measuring
Distance
5~10cm
Storage
temp
-20~40℃,
Relative humidity≤85%
LCD Display
±0.1℃
Power
DC3V(2*AAA)
Accuracy
±0.2℃
Size
150(L)×44(W)×25(D)mm