Smart Side Table PRODUCT REFS-KBBM1111 / KBBM1112/KBBM1113/KBBM1114 Assembly Instruction Thank you for purchasing the Smart Side Table. In order to make the best use of this product and to use it safely, please read the manual carefully before use and keep it for future reference. Imported By: Imported by: Forward Industries, 33401. U.S.
Safety and Care Advice 1. The maximum weight that can be placed on this product is 33LBS. 2. This product must not be used as a seat. 3. Always use the original AC adapter and power cable, otherwise it may cause slow wireless charging, poor bluetooth speaker function. In extreme cases, an incompatible AC adapter may burn out. Specifications Drive units: Subwoofer 6.5"4Ω40W x 1pcs + Full range 2.75" 8Ω15W x 2pcs+TweeterΦ31mm 6Ω10W X2pcs RMS: 65W (35W+15W*2) Bluetooth frequency: 2. 402-2.
Main Components Legs Qty 4 ( 6.7 inch ) Legs Qty 4 ( 10 inch ) Note : two size legs options supplied Main body Qty 1 (16.14*13 inch ) Accessories Power Cable Qty 1 ( 39.37 inch ) AC power Adapter Qty 1 ( 47.24 inch ) EVA pad Spare Parts（If required） 3.5mm Aux Cable Qty 1 ( 37.4 inch ) Qty 4 (1.
Assembly Steps Step 1 Place main body upside down on to a clean fat surface. Note: Ensure the surface is suitably protected to prevent any scratches or damage to . the main body Screw legs into position on the underside of main body . Note: Two different legs length options are supplied. Step 2 With the help, Carefully turn the side table over into the standing position. Step 3 Plug the AC power adapter into the ‘DC IN’ port on . main body Connect the adapter cable AC to the power .
Controls / Functions 1. POWER / TWS 2. PLAY / PAUSE / PHONE 3. VOLUME - 4. VOLUME + 5. EQ ( Movie / Pop / Rock ) 6. WIRELESS CHARGING SYMBOL 7. USB PORT 5V 2.4A 8. DC IN 9.
Power On / Off 1. Connect the power adapter with the DC port (please make sure you use the original adapter supplied). You will hear "Power on" from the speaker. The speaker will automatically enter Bluetooth mode as default, and you will hear "Bluetooth, waiting for connection". 2. Press and hold the [ ] button to turn the unit off. You will hear "Power off". 3. Press and hold the [ ] button to turn the unit back on. AUX Auto Switch (LED indicator: the left LED light) 1.
Volume control 1. Press the 【 ➕ 】 button to increase the volume. The white LED indicator will flash during adjustment. The speaker will automatically defaults to mid volume when switched on. You will hear the voice prompt“ Maximum volume”when volume is max. 2. Press the 【➖ 】button to decrease the volume. EQ Switch( LED indicator: the middle LED light ) When the speaker is switched on and connected, the EQ button can be used to selected different music playback style.
Double click the 【 】 button of one speaker. The speaker will enter TWS paring mode. Your will hear an acoustic signal and the orange LED indicator flash rapidly. After TWS pairing, the LED of main speaker will become constant, and the LED of sub-speaker will flash slowly. 2. To switch off TWS pairing, press the【 】button of one speaker. Automatic Power Off The speaker will automatically turn off, if none of it’s functions are used after 10 minutes.
