User's Manual

User Manual
Bluetooth Earbuds With Charging Case
(model:DRIPZ)
Specification:
1.Bluetooth Version:BT5.0+EDR
2.Earbud Playback time:6 hours
3.Earbud charging time: 1.5 hours
4.Charging case Charging time:2.5 hours
5.Earbud Battery:3.7V/50mAh
6.Charging Case Battery:3.7V/800mAh
1.Please full charge the charging case and the earbuds(Keep earbuds stay in Charging case) before use
2.How to Pair
a) Pair with devices with TWS mode
After full charge,take the earbuds out from charge case, the LED on one earbud will flash white
(another earbud is solid white),switch on the Bluetooth on your devices and select “Dripz ”to pair
with. After paried, LED on both earbuds will be solid white
Note:If earbuds are off, to turn on them,please press and hold the MFB buttons for 2 seconds until
you see the flash white LED
b) Pair with devices with mono mode
Just take one from the charging case and keep another stay in, Following the same processes as
above “b”
c) Earbuds TWS pairing(Manual)
Press and hold MFB buttons on both earbuds for 3 seconds and then they will pair each other, after
successfully paired, LED on one earbud will flash white and other will be solid white
NotedUSE TWS model for pairing when the earbuds are paired with a new device for the first time
3.How to reset:
In case the earbuds crashed, ,Press and hold the MFB buttons for 8 seconds until turn on..
4.How to operate
Turn ON
Take earbuds from charging case, The earbuds will turn on automatically
Or Press and hold MFB buttons on both earbuds for 3 seconds to turn on them
manually
Turn OFF
Put earbuds back the charging case,the earbuds will turn off automatically
Or Or Press and hold MFB buttons on both earbuds for 3 seconds to turn off
them manually
Pause/Play
Single click the MFB button
Previous/Next
Hold the L/R MFB button for 1.5 seonds
Volume+/-
Double click L/R MFB button (Step by step)
Answer/hang up
Click the MFB button during phone call

Summary of content (2 pages)