User’s Manual Model : PCE5501AN-XX Version: 2017.2.
1. Introduction 2.4 / 5 GHz PCE5501AN 300Mbps 802.11a/b/g/n The PCE5501AN is adapting the next generation 4x4 MU-MIMO Wi-Fi technology, 802.11ac. It provides the great improvement in the performance compared with 802.11n and achieves wireless performance of up to 1.7Gbps. 2. Feature PCE5501AN Main Chip: Qualcomm QCA9980 It support data rate at 1.7Gbps Operating frequency: 5GHz 3. Harware Installation PCE5501AN 3-1.
proceed as follows: - Use caution; do not become a victim yourself - Disconnect power from the system - If possible, send another person to get medical aid. Otherwise, access the condition of the victim and then call for help. - Determine if the person needs rescue breating or external cardiac comparessions; then take appropriate action. 3.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 26 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 27 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 27 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 7280B-140601”.
Avertissement: (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e.
