802.
PRODUCT DESCRIPTION The PCE4502AN is adapting the next generation Wi-Fi technology, 802.11ac. It provides the great improvement in performance compare with 802.11n by utilizing 2Tx / 2Rx technology to achieve 867Mbps throughput on the 5GHz bands. PRODUCT SPECIFICATION Hardware Specification Standard RF Interface Operating Voltage Antenna Connectors IEEE802.11a; IEEE802.11n; IEEE802.11ac QCA9882 64-bit PCI-E 3.3v I-PEX x2 Radio specification 867Mbps Data rate Channel 802.11a 802.11a/n_HT20 802.
USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product.