BELLAGIO 300 Assembly Guide Istruzioni per il montaggio Guide d’assemblage
Table of Contents / Sommario / Sommaire Forno Venetzia Wood Burning Oven Assembly Guide ..........................................................................................................................2 Storing Your Forno Venetzia Wood Burning Oven .................................................................................................................................7 Guida All’assemblaggio ...................................................................................................
FVTOR300 FVTOR500 FVTOR300 FVTOR500 BELLAGIO BELLAGIO 300 300 Product Specifications Wood Burning Wood Oven Burning Oven Specifiche del Prodotto Product Specifications Product Specifications Specifiche del Product Specifiche Prodotto ddu el Prodotto Spécifications Produit Specifications Spécifications Spécifications d u P roduit d u Produit Specifiche del Prodotto Product Specifications Spécifications du P
BELLAGIO 300 Wood Burning Oven Assembly Guide 2
Assembly Guide 1. Carefully unpack the oven by lifting the box over the top of the oven. 2. Carefully remove the items from inside the cabinet and oven chamber taking care not to scratch the various parts. Do not dispose of the polystyrene as you will need this during assembly to avoid scratching the oven and parts. 3. Carefully remove the bricks from the inside of the oven. This will make it lighter and easier to move. Handle the bricks with care as they are fragile. 4.
1 – Chimney Cap 1 – Chimney Pipe 1 – Oven Body 1 – Oven Door 2 – Sliding Shelves 1 – Adjustable Oven Tool Holder 1 – Storage Cabinet with shelves 2 – Storage Cabinet Doors 2 – Swivel Wheels 2 – Fixed Wheels 5. Position the 2 polystyrene packaging on the floor and place the parts on it to avoid scratches. 6. Place the222 pallet ramps on the ground beside the pallet where indicated. 7. Remove theBrackets wheel blocks from around the wheels and remove the strapping. 2 – Wheel 8.
10. Place the wheel blocks up against the wheels to ensure the oven does not move. 11. Extend the sliding shelf brackets from the inside the oven. 12. Insert the sliding preparation shelves by aligning the brackets on the side of the shelf with the extended bracket from the oven and gently push inward to insert the shelf brackets. Take care to keep the shelf straight and properly aligned with the oven. 13. Attach the adjustable tool holder using 4 plastic head screws and 4 plastic washers.
14. To extend the retractable tool holder slide the tool holder upward until the plastic head screws can be steered into the “hooks” on the left side of the slot in the tool holder. 15. Ensure all 4 plastic head screws are completely inserted into the “hooks” and the tighten. This helps minimizes the possibility of the tool holder retracting when holding oven tools in the extended position. 16. To retract the tool holder, remove all tools, and loosen all 4 plastic head screws.
17. Slide the chimney pipe into the flue opening on the top of the oven. Ensure it is completely in place and straight. 18. Slide the chimney cap into the top of the chimney pipe. Ensure it is also completely inserted into the chimney pipe. 19. Carefully place the bricks back inside the oven chamber. Storing your oven…. 1. Ensure any embers and ash are extinguished completely and empty into the metal bucket or container as previously instructed. Sweep oven hearth to remove any residual ash and soot. 2.
BELLAGIO 300 Wood Burning Oven Istruzioni per il montaggio 8
Istruzioni per il montaggio 1. Togliete il forno sollevando la scatola sopra la parte superiore del forno. 2. Togliete gli articoli dall'interno dell'armadio e dalla camera del forno, facendo attenzione a non graffiare le diverse parti. Non buttate il polistirolo, dato che vi servirà durante il montaggio per evitare di graffiare il forno e i suoi componenti. 3. C Togliete i mattoni che trovate all'interno del forno. In questo modo sarà più leggero e sarà più facile spostarlo.
1 – Comignolo 1 – Canna fumaria 1 – Corpo del forno 1 – Sportello des forno 2 – Ripiano scorrevole 1 – Porta utensili del forno 1 – Armadio di stoccaggio con ripiani 2 – Sportelli dell'armadio di stoccaggio 2 – Ruote girevoli 2 – Ruote fisse 5 Mettete per 2 terra gli imballi in polistirolo e posizionatevi sopra le varie componenti per evitare che si graffino. 6 Posizionare 222le rampe del pallet sul terreno accanto al pallet dove indicato.
10. Posizionare i blocchi delle ruote contro le ruote per evitare che il carrello si sposti. 11. Estendere il ripiano scorrevole dall'interno del forno. 12. Inserire i ripiani scorrevoli di preparazione dalla staffa sul lato del ripiano con la staffa estesa dal forno e spingere delicatamente verso l'interno per inserire le staffe del ripiano. Fare attenzione a mantenere il ripiano diritto e correttamente allineato con il forno. 13.
. Per allungare il porta utensili estraibile è necessario farlo scorrere verso l'alto fino a che le viti in plastica non si inseriscono nei "ganci" sul lato sinistro. 15. Controllate che tutte le 4 viti in plastica siano completamente inserite nei "ganci" e stringetele. In questo modo il porta utensili non si chiuderà improvvisamente quando è in posizione estesa. 16. Per accorciare il porta utensili, togliete tutti gli utensili e allentare le 4 viti.
17. Inserite la canna fumaria nell'apertura di uscita fumi posta sulla parte superiore del forno. Controllate che sia in posizione corretta e diritta. 18. Inserite il comignolo sulla cima la canna fumaria. Accertatevi che sia inserito completamente nella canna fumaria. 19. Riporre i mattoni all'interno della camera del forno. Come immagazzinare il vostro forno... 1. Verificate che le braci e la cenere siano completamente spenti e svuotateli nel secchio di metallo o nel contenitore apposito.
BELLAGIO 300 Wood Burning Oven Guide d’assemblage 14
Guide d’assemblage 1. Désemballez soigneusement le four en soulevant la boîte au-dessus du four. 2. Retirez avec soin les composants de l’intérieur de la boîte et de la chambre du four sans érafler les nombreuses pièces. Ne pas jeter le polystyrène car vous en aurez besoin durant l’assemblage pour éviter d’érafler le four et les pièces. 3. Retirez soigneusement les briques situées à l’intérieur du four. Ceci le rendra plus léger et plus facile à déplacer. Gérez les briques avec soin car elles sont fragiles.
1 – Chapeau de cheminée 1 – Conduit de cheminée 1 – Corps du four 1 – Porte du four 2 – Tablette coulissante 1 – Porte-outil réglable 1 – Rangement avec tablettes 2 – Porte de rangement 2 – Roues pivotantes 2 – Roues fixes 5. Positionnez l’emballage en polystyrène au sol et placez les pièces dessus pour éviter toutes éraflures. 2 6. Placer les rampes de palettes sur le sol à côté de la palette à l'endroit indiqué. 222 7.
**MISE EN GARDE– COMME LE FOUR EST LOURD, CERTAINES ÉTAPES NÉCESSITENT DEUX PERSONNES POUR EFFECTUER L’ASSEMBLAGE** 10. Placez la cale à roulettes contre les roulettes pour bien immobiliser le chariot. 11. Étendre les support de la tablette coulissante depuis l'intérieur du four. 12. Insérez les tablettes coulissantes de préparation en l’alignant avec les supports sur le côté de la tablette avec le support étendu du four et poussez doucement vers l'intérieur pour insérer les supports de tablette.
14. Pour agrandir le porte-outil rétractable, glissez le porte-outil vers le haut jusqu’à ce que les vis en plastique puissent être dirigées dans les « crochets » à gauche de l’espace dans le support à ustensiles. 15. S’assurer que les 4 vis en plastique soient complètement insérées dans les « crochets » et bien serrées. Ceci permettra de réduire la possibilité que le porte-outil se rétracte quand les outils du four sont placés en position déployée.
16. Pour rétracter le porte-outil, retirer tous les outils et desserrer les 4 vis en plastique. Soulevez légèrement le porte-outil pour le retirer des « crochets » et le permettre doucement 16. Pour rétracter le porte-outil, retirer tous les outils et desserrer les 4 vis en plastique. de glisser vers le bas en position d’entreposage. Soulevez légèrement le porte-outil pour le retirer des « crochets » et le permettre doucement de glisser vers le bas en position d’entreposage. 17.
www.fornovenetzia.com email: info@fornovenetzia.
www.fornovenetzia.com email: info@fornovenetzia.