RC240 3D Mouse Presenter V1.
RC240 3D Mouse Presenter V1.3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules.
RC240 3D Mouse Presenter V1.3 Table of Contents PACKAGE CONTENTS.................................................................................4 SYSTEM REQUIREMENTS.............................................................................4 RECHARGING THE PRESENTER .....................................................................4 KEY DEFINITIONS ......................................................................................5 USE PRESENTER WITHOUT RUNNING AIMMASTER™ PRO SOFTWARE ...........
RC240 3D Mouse Presenter V1.
RC240 3D Mouse Presenter V1.3 Key Definitions Use Presenter without running aimMaster™ Pro software Before installing the powerful Presenter Auxiliary Tools – aimMaster™ Pro, you can use the functions include 3D Air Mouse, Page Up/Down, Group Vibration alarm, Volume Adjust, etc. However, the Virtual Laser Pointer can’t work. Install aimMaster™ Pro Insert the CD to your computer. The following windows will pop up. Follow the instructions to install aimMaster™ Pro.
RC240 3D Mouse Presenter V1.3 Start Using Presenter The default mode entered is Basic mode that comes with the basic functions. There are two more operation modes could be used: Standard Mode: allows you to use Check/Line Marks and other functions. Advanced mode: allows you to use motions keys for more commends. Power ON the Presenter Click the POWER key once to turn on the Presenter. The purple LASER key flashes once to confirm the ON status.
RC240 3D Mouse Presenter V1.3 Basic Mode Key Definitions Key POWER LASER UP DOWN OK LEFT RIGHT Action Function If Presenter is Off, this click turns power to On. Click If Presenter is On, this click forces Slide Show (shift F5) or Close Slide Show (ESC) Press & hold Turns Presenter to Off. until Purple LED is On Enables or Disables 3D Mouse. Click If 3D Mouse is enabled, the blue light of LASER key is flashing.
RC240 3D Mouse Presenter V1.3 the LASER key is flashing. The RIGHT and LEFT key is Mouse Right and Left button respectively. LASER key once again to disable the 3D Mouse. The blue Click light on the LASER key is turned off. The RIGHT and LEFT keys are NOT Mouse Right and Left now. When 3D Mouse is not moving for 30 seconds, the Presenter turns off the 3D Mouse automatically to save the battery power.
RC240 3D Mouse Presenter V1.3 Volume Adjust Press and hold OK key, rotating Presenter clockwise will enlarge the volume. Rotating counter-clockwise will decrease the volume. The volume meter will be shown on the right up corner of the screen. Standard Mode Standard Mode has all the functions in Basic Mode plus many other useful features. Right click the aimMaster™ Pro icon and select Mode from the pop-up menu. Choose “Standard Mode”. The icon in System Tray becomes .
RC240 3D Mouse Presenter Press & Hold Click OK Press & Hold LEFT Click RIGHT Click LED on LASER key Charging Click any key V1.3 In Check Mark or Line Mark Clear all marks operation Scroll down In Check Mark operation, a Check Mark is placed. In Line Mark operation, a red line is drawn, the longer time you press, the longer red line extends to the right.
RC240 3D Mouse Presenter V1.3 Undo or Remove all Marks. Press UP key to undo the previous mark or DOWN key to clear all the marks. Timer Setting Right click the aimMasterTM Pro icon on the System Tray. Select “Timer Setting” tab. You may define your own timer by choosing Add Timer tab. A Timer Window allows you to enter 2 time periods. If you have 35 minutes in your seminar and you want to get warned 5 minutes before the end, please enter 30 and 5 to the first and second fields respectively.
RC240 3D Mouse Presenter V1.3 Plug & Present A. Open Editor Double click the aimMasterTM Pro icon on the System Tray to pop up the Open Editor Window. Click the Browse button to enter up to 3 paths of the files to be presented. You Click to read Quick Guide may click the Click to read User’s Manual Quick Guide tab or Manual tab to read Quick Guide or User’s Manual. B. Plug & Present Plug the Receiver into the USB port of your computer.
RC240 3D Mouse Presenter V1.3 Group Vibrating You can use another Presenter to inform the orator “time is end” of a presentation. We call this feature as “Group Vibrating” and you need to have two (or more) Presenters linked with the Receiver at the same time. Turn ON both Presenters. Press and hold the FEATURE key of one Presenter for more than 2 seconds, all the Presenters are vibrating. Anti Shaking When you use Presenter 3D Mouse to click (either single clicking or double clicking) small objects (e.
RC240 3D Mouse Presenter V1.3 2. Press and hold both OK and FEATURE keys of Presenter for around three seconds, until LASER key light flashes purple light. 3. Release both keys and click any key. The Blue LED of Receiver blinks. The Presenter and Receiver are linked successful and ready for use. Click any key to see if this Receiver is linked correctly. The blue light on the Receiver will flash when you click the Receiver key.
RC240 3D Mouse Presenter V1.3 There are 8 rows for 8-directional motion commands. You may enter up to 3 key codes for each command on the first to the third column as specified Code 1, Code 2 and Code 3 respectively. Use mouse to left-click on the field you want to enter the hotkey code. Type from your keyboard for up to 3 fields, one code for one field. The single key (like B, D, etc.) or the combinational key (like Alt-F4, Alt-V, etc.) could be entered in each field.
RC240 3D Mouse Presenter V1.3 View” accordingly. Please check PowerPoint or other applications for the hotkey codes. You may define your own hotkey code map and save it for your later use. When you enter all the codes on the dialog, click the “Save” button and enter the filename to be saved. You may retrieve a Hotkey Setting by clicking “Load” button and select one Hotkey Setting file from the list. You may modify the Hotkey codes by clicking the “Load” button to select one of the Motion Key Map files.
RC240 3D Mouse Presenter V1.3 Note: MS Windows might send out different key code when the input method for some language is enabled. For example, although you type from keyboard a letter “B” into Word, and you could see the letter “B” shown on the screen. However, even when you use the keyboard to enter this “B” in a PowerPoint Slide Show screen, it can not change to black screen. In case it happens, please disable the input method for your own language before operating the Motion keys.
RC240 3D Mouse Presenter V1.3 1. Disable 3D Mouse . Press and hold the RIGHT key . 2. Move Cursor to this area Slide Show View The OSD over the Slide 3. Release RIGHT key Slide Sorter View From the Slide Sorter View, you may enable the 3D Mouse, select one of the Slides that you want to show to the audiences, and then disable the 3D Mouse. To show this page for the Slide Show, press and hold the RIGHT key to open the OSD.
RC240 3D Mouse Presenter V1.3 FEATURES Built-in wireless 3D Mouse eases the cursor control. Page Up/Page Down, Scroll Up/Scroll Down. Hotkey for Slide Show or Close Slide Show. 2.4 GHz RF provides up to 20 meters omni-directional working range. Built-in Virtual Laser Pointer for danger-free guidance and suitable for big presentations that use multiple projectors. USB Receiver supports microSD Card Reader (RC240/611 only).
RC240 3D Mouse Presenter V1.3 Product Specifications Category Function Package Size Weight PC Interface Protocol Operation Distance Charging Time Usage Time DC Power OS Certification Description Presenter – Page Control, Virtual Laser Pointer, 3D Mouse, Motion Keys, Group Vibrating, Timer Vibrating, Check/Line Mark, Plug & Present.
RC240 3D Mouse Presenter V1.3 Q&A 1. Language: Q: Does software, aimMaster™ Pro, support the language of my country? A: Please move the cursor to the aimMaster™ Pro icon on the System Tray. Right Click this icon, and select the “Language” Tab. You will find a list of the languages. Pick up the one you need. The user interface will be changed to this language. 2.
RC240 3D Mouse Presenter V1.3 of your PowerPoint file is inactive. You should make this window active by moving mouse cursor to this window and make a left click. Then, clicking the POWER key will open the Slide Show successfully. Q. When I click POWER key to open the Slide Show of a PowerPoint file, it always open the first page and could not start from any middle page. A.
RC240 3D Mouse Presenter V1.3 (3) When you press and hold the RIGHT key to start the Motion key, the 3D Mouse of the Presenter should be inactive; otherwise, it is just a mouse right key and can not activate the Hotkey OSD. 6. Low Battery Q. When the blue light of the LASER key becomes orange, how many more hours can I use the Presenter? A. You should be able to use the Presenter for several more hours.
RC240 3D Mouse Presenter V1.3 Q. I lost my Quick Instruction Guide, where can I get a new one? A. Double click the aimMaster™ Pro icon on the System Tray to pop up the File Input Window. You will see two tabs on the right-down corner. Click “Quick Guide” or “Manual” to open the Quick Instruction Guide or User’s Manual. 10. Anti Shaking and Mouse Speed Q. How can I choose the best setting of the Anti Shaking and Mouse Speed? A. When you use slower 3D Mouse Speed, you are easier to click small object.