User's Manual

ManualsBrandsFormosa Teletek ManualsComputers & AccessoriesBluetooth v2.0+EDR class2 USB Adapter

a. English

1.Bluetooth software installation and basic operations

USB Adapter Installation

1. Windows Bluetooth Software Installation

NOTE: Please install the USB Bluetooth software before inserting the USB adapter!

• Place the installation CD-ROM into the pc, the setup should start automatically. If the

setup does not start please go to Windows Explorer, locate the CD-ROM and run

‘autorun.exe’.

• Choose ‘Install Drivers and Application Software’.

• The InstallShield Wizard will start.

USER GUIDE

Rev.: 0.8

Date: 2005/7/21

Summary of content (6 pages)

PAGE 1
USER GUIDE Rev.: 0.8 Date: 2005/7/21 a. English 1.Bluetooth software installation and basic operations USB Adapter Installation 1. Windows Bluetooth Software Installation NOTE: Please install the USB Bluetooth software before inserting the USB adapter! • Place the installation CD-ROM into the pc, the setup should start automatically. If the setup does not start please go to Windows Explorer, locate the CD-ROM and run ‘autorun.exe’. • Choose ‘Install Drivers and Application Software’.
PAGE 2
• On the Welcome screen click Next to continue. • Read the License Agreement and select ‘I accept the terms in the license agreement’. Click Next.
PAGE 3
• Click Next to accept the default destination folder, click Change to browse to a new destination folder for the Bluetooth software. • Click Install to begin the installation of the bluetooth software.
PAGE 4
• For Windows 2000/XP users, a "Driver Signature Notice" window appears, please click the "OK" button. • For Windows 98 users, a window appears which asks you to insert the Windows 98 CD-Rom. Insert the original Windows 98 CD Rom and click “OK”. • The "Bluetooth device not found" window appears. Insert the USB Bluetooth adapter in the USB port. Click "OK".
PAGE 5
• Click Finish to complete the bluetooth software installation. • Click ‘Yes’ to restart the computer and complete the installation. • Click start/(settings)/controlpanel/system/devicemanager. Check under 'Universal Serial Bus controllers' that a 'USB Bluetooth Device' is installed. • If the information is not present please unplug the adapter, now plug in the adapter to initiate the driver.
PAGE 6
FCC Statement The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.