Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 Skylab M&C Technology Co., Ltd FTK369 Multiprotocol Bluetooth 4.2 /ANT Low Energy Module Datasheet Name: Multiprotocol Bluetooth 4.2/ANT Low Energy Module Model No.: FTK369 FCC ID: 2AU59-FTK369 Revision: V1.06 Revision History 1 / 17 Revision Description Approved Date V1.01 Initial Release Hogan 20170103 V1.02 Revise The Product Picture Hogan 20170414 V1.03 Revise Operating Temperature Hogan 20170421 V1.
Skylab M&C Technology Co., Ltd Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 Contents 1. General Description ...................................................................................................................................................................................... 4 2. Applications ............................................................................................................................................................................
Skylab M&C Technology Co., Ltd Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 10.3 Current .............................................................................................................................................................................................. 14 11. Manufacturing Process Recommendations ..................................................................................................................................... 15 12.
Skylab M&C Technology Co., Ltd Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 1. General Description The FTK369 is a highly integrated Bluetooth 4.2 BLE module, designed for high data rate, shortrange wireless communication in the 2.4GHz ISM band. Also, FTK369 support ANT Protocol. The module is based on Nordic nRF52832 radio Transceiver IC, has a 32 bit ARM Cortex-M4F CPU, Flash memory and analog and digital peripherals.
Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 Skylab M&C Technology Co., Ltd 4.
Skylab M&C Technology Co., Ltd Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 5. Interfaces 5.1 Power Supply Regulated power for the FTK369 is required. The input voltage Vcc range should be 1.7V to 3.6V. Suitable decoupling must be provided by external decoupling circuitry (10uF and 0.1uF). It can reduce the noise from power supply and increase power stability. 5.2 System Function Interfaces 5.2.
Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 Skylab M&C Technology Co., Ltd Instance Master/Slave TWI0 Master TWI1 Master Table5-1: TWI Pin Share Scheme Note：I2C:Inter－Integrated Circuit 5.2.3 Flash Program I/Os The module has two programmer pins, respectively SWDCLK pin and SWDIO pin. The two pin Serial Wire Debug (SWD) interface provided as a part of the Debug Access Port (DAP) offers a flexible and powerful mechanism for non-intrusive debugging of program code.
Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 Skylab M&C Technology Co., Ltd 5.2.5 UARTs The Universal Asynchronous Receiver/Transmitter offers fast, full-duplex, asynchronous serial communication with built-in flow control (CTS, RTS), support in hardware up to 1 Mbps baud. Parity checking is supported. Support the following baudrate in bps unit: 1200/2400/4800/9600/14400/19200/28800/38400/57600/76800/115200.
Skylab M&C Technology Co., Ltd Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 be used as an analog wakeup source from System OFF or System ON. The comparator threshold can be programmed to a range of fractions of the supply voltage. 5.2.8 Reset The reset pin of the FTK369 module is in the internal pull-high state , when the reset pin of the module is input to a low level , the module will be automatically reset .
Skylab M&C Technology Co., Ltd Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 6. Module Specifications Hardware Features Model FTK369 ANTenna Type PCB ANTenna Chipset Solution nRF52832 Voltage 1.7V~3.6V Dimension(L×W×H) 17.4×13.7×1.9 mm Wireless Features Wireless Standards Bluetooth ® 4.2,ANT Frequency Range 2400MHz---2483.5MHz Data Rates 1Mbps(Bluetooth ® 4.2) Modulation Technique GFSK Modulation(Bluetooth ® 4.
Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 Skylab M&C Technology Co., Ltd 7. Module Pinout and Pin Description 7.
Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 Skylab M&C Technology Co., Ltd 7.2 Pin Description Pin No. Pin Name Description Remark 1 GND Ground 2 VCC Main Power Supply 1.7V to 3.6V 3 P0.25 General Purpose I/O Digital I/O 4 P0.26 General Purpose I/O Digital I/O 5 P0.27 General Purpose I/O Digital I/O 6 P0.28 Digital I/O; Analog input ADC/LPCOMP input 4 7 P0.29 Digital I/O; Analog input ADC/LPCOMP input 5 8 P0.
Skylab M&C Technology Co., Ltd Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 8. PCB Design Guide External antenna with IPEX interface 9.
Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 Skylab M&C Technology Co., Ltd 10. Electrical Characteristics 10.1 Absolute Maximum Ratings Parameter Condition Min. Storage Temperature Range Typ. Max. Unit -40 125 °C ESD Protection VESD / 4000 V Supply Voltage VCC -0.3 3.9 V 3.63 V Voltage On Any I/O Pin -0.3 Table10-1: Absolute Maximum Ratings 10.2 Recommended Operation Ratings Parameter Symbol Min. Typ. Max. Unit Extended Temp.
Skylab M&C Technology Co., Ltd Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 11. Manufacturing Process Recommendations Figure 6: FTK369 Typical Lead-free Soldering Profile Note：The final re-flow soldering temperature map chosen at the factory depends on additional external factors, for example, choice of soldering paste,size, thickness and properties of the module`s baseboard etc.
Multiprotocol Bluetooth 4.2/ANT Low Energy Module Datasheet Module FTK369 Skylab M&C Technology Co., Ltd 12. Packaging Specification FTK369 modules are put into tray and 528 units per tray. Each tray is ‘dry’ and vacuum packaging.
FCC Statement FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 ;PCB Antenna with antenna gain 0 dBi This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
