USER MANUAL
Installation Overview Optimal device location Securing the mounting plate Items you will need Drilling a path through for DC Jack & Ethernet cables Securing the mounting plate Wire connections Power options Internet connectivity options Attaching the device to its mounting plate Ceiling mounted Wall mounted Get the App and set up the device 8 9 9 10 10 13 14 14 14 14 14 17 18 Optional Accessories FoobotSAT stand DC Power supply 19 20 Usage instructions Product Status Consult or Retrieve FoobotSAT R
Welcome FoobotSAT monitors fine particulates, volatile organic compounds, carbon dioxide, temperature, relative humidity and features an infrared motion detection sensor. This user manual will provide basic guidance for set up, first use, and troubleshooting. Further information, tutorials, and troubleshooting guides can be found on https://foobot.io or by contacting your reseller.
ENGLISH Items included FRANCAIS FoobotSAT monitor Mounting plate USER MANUAL User Manual 5
Getting to know your FoobotSAT Status lights Motion sensor Setup button
ENGLISH FRANCAIS QR code for setup Reset button DC Power PoE enable Ethernet port 7
Installation Overview 1 Select the optimal device location. 2 Secure the mounting plate to the wall or ceiling. 3 Connect the DC cable to the device. 4 Attach FoobotSAT to its mounting plate by rotating it. 5 Get the App to set up the device and follow the instructions to have it connected to the Internet. Each of these steps are detailled further detailed in the following pages.
ENGLISH 1 Optimal device location FRANCAIS FoobotSAT can either be attached to a wall or ceiling. A third option is to use it with a stand — see the accessories section. Any other placement will result in unexpected behavior and is to be avoided. Wall mount 1.2m to 1.8m (4ft to 6ft) above floor depending if occupants are typically seated or standing. Minimum 1m (40in) from doors, windows and air outlets.
Ceiling mount Minimum 1m (40in) from doors, windows, walls and air outlets. Recommanded height 2.40m to 2.
FRANCAIS Items you will need ENGLISH 2 Securing the mounting plate A A minimum of 4 screws from 4-48 to ¼-38 dimensions. (M3 to M5 dimensions). Head thickness of the screw should not exceed 3.3mm. B Matching drywall plugs or anchors. C Matching screwdriver. D Drill bits matching your anchors or drywall plugs. E Optional: Drill bits to let DC jack and Ethernet cable through. Make sure you have the proper screws, anchors and the protection equipment required in your jurisdiction before getting started.
Drilling a path through for DC Jack & Ethernet cables You can use the canvas on the next page to help drill in a ceiling plate for the cables to go throug: • The bigger circle required for Ethernet is 0.9in (23mm) of diameter. • The smaller one is 0.5in (13mm) diameter for the DC jack. Secure the mounting plate Use a minimum of 4 screws and associated drywall plug or anchor to secure the mounting plate to the wall or ceiling.
ENGLISH FRANCAIS 13
2 Wire connections Power options FoobotSAT can be powered via a 12 Volt DC power supply Internet connectivity options FoobotSAT can be either connected via a 2.4GHz WiFi connection or using a standard Ethernet (RJ45) cable.
FRANCAIS Ceiling mounted ENGLISH 3 Attach the device to its mounting plate Once you have prepared the wiring and have the mounting plate attached to the ceiling you should connect the cable(s): 15
Then hook the FoobotSAT to the mounting plate and rotate it clockwise
FRANCAIS Connect the DC Jack to the device, then hook the FoobotSAT to its mounting plate and rotate it clockwise: ENGLISH Wall mounted Gently pull the DC cable while approaching the device to the mounting plate. Note that in this configuration, motion detection will not be accurate, and you have to make sure to locate the user button on the top right, so the monitoring sensors function properly.
4 Get the App and set up the device Visit http://getapp.foobot.io from your tablet or smartphone to download the mobile app. Alternatively, use the setup app or method supplied by your reseller. Follow the instructions to get the monitor connected to the internet.
FRANCAIS FoobotSAT stand ENGLISH Optional accessories FoobotSAT and Stand can be placed on a desk, table, or furniture. Make sure to have to the user button located on the top right, so the monitoring sensors function properly. In this configuration motion detection will only cover a limited area.
DC Power supply UL compliant 12V Foobot power supply, delivering between 0.5 and 1.5 amps.
FRANCAIS Product Status ENGLISH Usage instructions Use the following to understand product status, and troubleshoot: SETUP Loop of 3 blue LEDs. lighting up, one after another The device is ready to be setup via the app. OK Center LED blinking slowly in blue. Monitor is running correctly and sends its readings to the internet platform. DISCONNECTED Loop of 3 orange LEDs. lighting up, one after another The device is not connected to the internet.
Consult or Retrieve FoobotSAT Readings Once product set up is complete and the device is connected to the internet, visit http://dashboard.foobot.io from your computer or tablet. Alternatively, use the retrieval method or app supplied by your reseller. Factory reset To perform a factory reset, you need to press the button at the back of the product while powering up. Only do so if instructed by a support agent or your reseller. The procedure is executed as follows: 1 2 3 4 5 Unplug your device.
ENGLISH Intended use 1 Monitoring indoor air pollution and occupancy of indoor space with an Ethernet or WiFi internet connection. 2 Interfacing with compatible air treatment appliances, devices, or displays. 3 Providing live data to the Smart Air Building (Foobot SAB) service to optimize HVAC systems. FRANCAIS FoobotSAT is intended to be used for: Environmental condition limits For unit in operation Ambient room temperature 0° to 50° Deg.
Important Safety Instructions Before setting up and using the device and its accessories, please read and adhere to the instructions. Always keep these instructions in a safe place for reference. Warning A ceiling mounted device may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions, such as: • ALWAYS use stands and mounting devices recommended by the device manufacturer.
• • • • • • • • • • • • • • Do not use the FoobotSAT in a manner not specified by the manufacturer or with attachments/ accessories not specified by the manufacturer. Do not use the FoobotSAT near plants or vegetal. FRANCAIS • Do not place anything on top of the FoobotSAT or have its opening covered or obstructed while powered.
• This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference. Important notes 1 2 3 4 FoobotSAT is NOT TO be used as an emergency or medical device. If pollution remains high, you should consult an expert.
FRANCAIS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ENGLISH FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Industry Canada Compliance Statement This device complies with Industry Canada RSS-247 and license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
IC Notice: This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference. Including interference that may cause undesired operation of the device.