WRD-130-U1 Config Tools Manual Version 1.72 2016.5.
WRD-130-U1 Config Tools Manual Contents I、Screen function introduction ............................................ 2 ■ Setting : Parameter setting ................................ 2 ■ Read : Read the settings ................................... 3 ■ UHF/EPC : EPC/eTag Read and write .......................... 4 ■ Card : Card set ............................................ 5 ■ Test : Card reader test .................................... 6 ■ Command : Instruction test .................................
WRD-130-U1 Config Tools Manual I、Screen function introduction ■ Setting : Parameter setting Interface HID/CDC auto send : HID/CDC Automatically send data mode COM auto send : RS232 Automatically send data mode Read card mode : Card reader mode settings Auto : Check the box enable automatic card reading LED : Check the box enable automatic card reading LED , Beep : Check enable automatic card reading voice Check UID : Check special cards feature is enabled Same Card : Check the box enable the same card che
WRD-130-U1 Config Tools Manual ■ Read : Read the settings Automatically reads the volume label to the specified region data , Main purpose for reading TID Or write text data Contains EPC USER , Format and length in accordance with the requirements set - 3 -
WRD-130-U1 Config Tools Manual ■ UHF/EPC : EPC/eTag Read and write - 4 -
WRD-130-U1 Config Tools Manual ■ Card : Card set Manager Function Card Code - 5 -
WRD-130-U1 Config Tools Manual ■ Test : Card reader test - 6 -
WRD-130-U1 Config Tools Manual ■ Command : Instruction test - 7 -
WRD-130-U1 Config Tools Manual ■ Firmware : Firmware update - 8 -
WRD-130-U1 Config Tools Manual II、Multi card reader test Please replace the machine firmware with CDC (WRD-130-U1-CDC_V017x.wfw) It can be used.
WRD-130-U1 Config Tools Manual ■ Use UHF RFID Reader Utility The implementation of Connect, The implementation of Enter Reader, Select Multi Page , Check Repeat, The implementation of Read - 10 -
WRD-130-U1 Config Tools Manual ■ Use ComTools Select the correct COM? Each computer is different , Enter 55 0D Instructions , Check AUTO 300ms HEX - 11 -