Bluetooth FX30
The FX30 is a wireless headset equipped with Bluetooth technology. It is specially designed for different kinds of Bluetooth cell phones. How can I use my FX30 Bluetooth headset? You can connect your FX30 headset to your mobile phone, PC or any device with Bluetooth technology that supports the Headset or the Hands free profile. This user's guide focuses on how to use the headset with your mobile phone.
Package Contents FX30 Bluetooth Headset USB Charger Inter-Changeable panel User manual Quick Start guide 1. Fully charge your FX30 The FX30 headset comes with a built - in rechargeable battery. We recommend that you charge the battery until the headset indicator turns off before using the headset for the first time. During charging, the indicator light shows a steady red light and the headset is turned off. When the battery is fully charged, the indicator will be off. It takes 3 to 3.
e. Your phone will confirm when pairing is complete. You pair the headset with the phone by adding it to a list of paired devices in the phone. The two devices then recognize each other when they connect. Once you have paired your headset with the phone, you do not need to pair it again until you want to use it with another device. 4.
Troubleshooting & Warning No sound contact between headset and phone. The headset and the phone you are using with it have to be paired to recognize each other. They also have to be within range of each other. Make sure that there are no solid objects, such as walls or furniture, in between the headset and the phone. The indicator light flashes red. This indicates that the headset has only limited talk and standby time left. Charge the headset battery for approximately 3 to 3.5 hours.
rapidly Volume Adjustment Press the V(+) or V(-) repeatedly to increase or Short tones decrease speaker volume Receive Call Press the MFB once Ringing tone stopped End Call Press the MFB once A short beep tone Voice Dialing * 1. Press MFB once A tone sounds to prompt the user to speak the name of the person he wishes to call 2. Say the voice tag name the phone finds the entry, pauses two seconds, then places the call Re-dialing Press and hold the V(-) button around 3 seconds Reject Call 1.
