FoMaKo - Upgrade Your Meeting Experience www.fomako.net FoMaKo NDI/SDI/HDMI PTZ IP CAMERA User Manual （V1.2） FoMaKo FoMaKo E-mail: ivan@fomako.net Website: www.fomako.net Phone: 0086-18565635753 Address: 10F NiuLanQian Building,Minzhi, longhua, shenzhen, China, 518000 Please feel free to contact us if you have any questions.
Attentions Improper operations may damage the product structure and result in mechanical failure. Please note the following tips: Do not move the camera by grabbing the head. Move the camera by holding the bottom with one or both hands. Please do not rotate the lens and holder manually no matter the camera is power on or off; otherwise it may damage the camera structure and result in failure of camera self-check and unable to start the camera.
This manual introduces functions, installations and operations for this PTZ camera in details. Please read this manual carefully before installation and use. 1. Cautions 1.1 Avoid damage to product caused by heavy pressure, strong vibration or immersion during transportation, storage and installation. 1.2 Housing of this product is made of organic materials. Do not expose it to any liquid, gas or solids which may corrode the shell. 1.3 Do not expose the product to rain or moisture. 1.
Content 1. Camera Installation..................................................................................................................................................... 4 1.1 Camera Introduction......................................................................................................................................... 4 1.2 Interfaces and Connection................................................................................................................................ 4 1.
1. Camera Installation 1.1 Camera Introduction FoMaKo Figure 1.1 Interface of ST (standard) Model 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. USB2.0 Interface (U disk storage) 12. LAN（NDI） Port 13. DC12V Input Power Supply Socket 14. Power Switch 15. Rotary DIP Switch 16. RS232 Control Interface (input ) 17. RS232 Control Interface (output ) 18. RS485 Input (left +, right-) 18、19 RS422 Input 19. Audio Input Interface (Line-in) 20.
Figure 1.2 Wiring Diagram 1) After power on and self-checking, the camera will automatically return to the preset 0 position if it’s pre-set. 2) The default address for the IR remote control is 1#. If restore the menu to factory defaults, the remote control address will restore to 1#. 1.3 Mounting Brackets Notes: Ceiling or wall mounting brackets can only be mounted on template and concrete wall. For safety reason, plasterboard is not recommended.
2) Ceiling Mounting 9
2. Product Overview 2.1 Model Model No. —XXX—XX IR ---IR Remote Controller WR---Wireless Remote Controller 10---10X Optical Zoom Lens 12---12X Optical Zoom Lens 20---20X Optical Zoom Lens 30---30X Optical Zoom Lens Figure 2.
2.2 Dimension FoMaKo Figure 2.2 Product Dimension 2.3 Accessory Please check below standard and optional accessories when unpacking the box. Standard Accessory Optional Accessory Power adapter Wireless Remote Control IR Remote Control Wall Mount RS232 Cable Ceiling Mount User Manual 2.4 RS-232 Interface 1).
Connection to PC or Camera Controller Camera WindowsDB-9 1.DTR 2.DSR 3.TXD 4.GND 5.RXD 6.GND 1.DCD 2.RXD 3.TXD 4.DTR 5.GND 6.DSR 7.IR OUT 8.NC 7.RTS 8.CTS 9.RI 2). RS232 Mini-DIN 8-pin Port Definition NO. 1 2 Port DTR DSR Definition Data Terminal Ready Data Set Ready 3 4 5 6 TXD GND RXD GND 7 8 IR OUT NC Transmit Data Signal Ground Receive Data Signal Ground IR Commander Signal NO. 1 2 3 4 5 6 7 8 9 Port DCD RXD TXD DTR GND DSR RTS CTS RI No Connection 3). RS232 (DB9) Port Definition 4).
Camera cascade connection Camera 1 Camera 2 1.DTR 2.DSR 3.TXD 4.GND 5.RXD 6.GND 7.IR OUT 8. NC 1.DTR 2.DSR 3.TXD 4.GND 5.RXD 6.GND 7.OPEN 8.OPEN Note: Camera has RS232 input and output interfaces, which can be cascaded according to the above methods. 2.
Full HD Resolution: 1/2.8 inch high quality CMOS sensor. Resolution is up to 1920x1080 with frame rate up to 60fps. Multiple Optical Zoom Lens: 10X/12X/20X/30X optical zoom lens. The 5X zoom camera is with 72.5° FOV without distortion. Leading Auto Focus Technology: Fast, accurate and stable auto focusing technology. Low Noise and High SNR: Super high SNR image is achieved with low noise CMOS. Advanced 2D/3D noise reduction technology further reduces the noise while ensuring high image clarity.
Iris Auto/Manual Electronic Shutter Auto/Manual BLC ON/OFF WDR OFF/ Dynamic level adjustment Video Adjustment Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve SNR >55 dB Input/Output Interface Video Interfaces HDMI, SDI, LAN(POE、NDI), CVBS, RS232-IN/OUT, RS422, RS485, A-IN, USB2.
Package Optional Accessories Power Supply, RS232 Control Cable, IR Remote Control, User Manual Ceiling / wall Mount (Extra Cost) 3. Remote Control Remote control instructions: remote control is divided into two types: infrared remote control and wireless remote control. Please read the following contents according to the actual remote control type. 3.1 Match Code for Wireless Remote Control One to One Code Matching: Press the "set" and "*" keys combined for 3 seconds, LED indicator starts flashing.
and then press“【#】” and last press“【F1】”. 1. Standby Key The camera enters standby mode if long press 3s on standby key; Long press 3s again on the standby key, the camera will self-check again and return to HOME position (If preset 0 position is set, the camera will return to preset 0 position without operation within 12s). 2. Camera Selection Select the camera address to control. 3.
clear all presets. 6. Pan/Tilt Control Up: press Down: press Left: press Right: press Back to middle position: press“【HOME】” Press and hold the up/down/left/right key, the pan/tilt movements will keep running, from slow to fast, until it runs to the endpoint; stop as soon as the key is released. 7.
9.
4. Network Configuration 4.1 Network Connection (Network connection is a little difficult for new users, if you can't get success, please email us: ivan@fomako.net , we will email you more detail video or PDF instructions) Direct connection: Connect the camera and computer by network connecting cable. Internet connection mode: Connect the camera to Internet by Router or Switcher and user can login the device by browser web page.
4.2 Web Login 1) Web Client Login Input the default IP address 192.168.5.163 in the browser and click Enter button to enter into Web Client login page. User can login as administrator and normal user. If login as administrator (Default User name/Password: admin), users can preview, playback, and set configuration in the Web Client; If login in as normal user (Default User name/Password: user1 or user2), users can only preview, playback and logout, no option for configuration.
Configure the parameters according to the network environment. Note: stream name live/av0 (live/ XXX) For example: The default IP address of the camera is 192.168.5.163. The way to obtain the RTSP video stream is as below rtsp://192.168.5.163:554/live/av0（av0 main stream） rtsp://192.168.5.163:554/live/av1（av1 sub stream） The default IP address of the camera is 192.168.5.163. the way to obtain RTMP video stream is as below rtmp://192.168.5.163:1935/live/av0（av0 main stream） rtmp://192.168.5.
Configure the parameters according to the network environment; the default IP address of the camera is 192.168.5.163, and the way to obtain the SRT video stream is as follows: srt://192.168.5.163:9000 2. Push Video Stream Configurations -> Video Configure-> Stream Publish Push RTMP stream to public network server, the stream camera IP must be on the public network, otherwise it will fail to connect to server.
4.4 Software Upgrading 1) Log in to the web page and manage camera settings. The default page is preview interface, where users cam PTZ control, record video, preset camera positions and etc. 2) Configurations -> System Configure-> Update 3) Click "browse" to select .mrg update file, then click upgrade button to finish software upgrading. 4) Camera reboot after completion of firmware update. It prompts with "successful upgrade". Log in to check the firmware version to make sure software upgrade successful.
Syntax Error Command Executable Not z0 60 02 FF Returned when the command format is different or when a command with illegal command parameters is accepted z0 61 41 FF Returned when a command cannot be executed due to current conditions. For example, when commands controlling the focus manually are received during auto focus. 5.
Command CAM_AE CAM_Shutter CAM_Iris CAM_Gain Limit CAM_Bright CAM_ExpComp CAM_Back Light CAM_WDRStrength CAM_NR Function Command Packet Up 8x 01 04 04 02 FF Down 8x 01 04 04 03 FF Direct 8x 01 04 44 00 00 0p 0q FF pq: B Gain Full Auto 8x 01 04 39 00 FF Automatic Exposure mode Manual 8x 01 04 39 03 FF Manual Control mode Shutter priority 8x 01 04 39 0A FF Shutter Priority Automatic Exposure mode Iris priority 8x 01 04 39 0B FF Iris Priority Automatic Exposure mode Bright 8x 01
Command CAM_PictureEffect CAM_Memory CAM_LR_Reverse CAM_PictureFlip CAM_ColorSaturation Function Command Packet B&W-Mode 8x 01 04 63 04 FF OFF 8x 01 04 63 00 FF Reset 8x 01 04 3F 00 pq FF Set 8x 01 04 3F 01 pq FF Recall 8x 01 04 3F 02 pq FF On 8x 01 04 61 02 FF Off 8x 01 04 61 03 FF On 8x 01 04 66 02 FF Off 8x 01 04 66 03 FF IR_Receive PictureEffect Setting pq: Memory Number(=0 to 254) Corresponds to 0 to 9 on the Remote Commander Image Flip Horizontal ON/OFF Image Flip Vertical ON/
Command Pan-tiltLimitSet Function Set Clear Command Packet 8x 01 06 07 00 0W 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF 8x 01 06 07 01 0W 07 0F 0F 0F 07 0F 0F 0F FF Note W:1 UpRight 0:DownLeft YYYY: Pan Limit Position(TBD) ZZZZ: Tilt Limit Position(TBD) 5.
IR_ReceiveReturn CAM_BrightnessInq CAM_ContrastInq 8x 09 04 A1 FF 8x 09 04 A2 FF CAM_FlipInq 8x 09 04 A4 FF CAM_GammaInq 8x 09 04 5B FF CAM_Low-LightModeInq 8x 09 04 2D FF CAM_VersionInq 8x 09 00 02 FF y0 50 03 FF y0 07 7D 01 04 00 FF y0 07 7D 01 04 07 FF y0 07 7D 01 04 38 FF y0 07 7D 01 04 33 FF y0 07 7D 01 04 3F FF y0 07 7D 01 06 01 FF y0 50 00 00 0p 0q FF y0 50 00 00 0p 0q FF y0 50 00 FF y0 50 01 FF y0 50 02 FF y0 50 03 FF y0 50 0p FF y0 50 00 FF y0 50 01 FF Off Power ON/OFF Zoom tele/wide AF
Clear Preset 0xFF Address 0x00 0x05 0x00 Preset ID SUM Call Preset 0xFF Address 0x00 0x07 0x00 Preset ID SUM Query Pan Position 0xFF Address 0x00 0x51 0x00 0x00 SUM Query Pan Position Response 0xFF Address 0x00 0x59 Value High Byte Value Low Byte SUM Query Tilt Position 0xFF Address 0x00 0x53 0x00 0x00 SUM Query Tilt Position Response 0xFF Address 0x00 0x5B Value High Byte Value Low Byte SUM Query Zoom Position 0xFF Address 0x00 0x55 0x00 0x00 SUM Quer
3) Wipe it with a soft, dry cloth when cleaning the camera lens. Wipe it gently with a mild detergent if needed. Do not use strong or corrosive detergents to avoid scratching the lens and affecting the video quality. 6.2 Troubleshooting 1)No video output a. Check whether the camera power supply is connected, the voltage is normal, the power indicator is lit. b. Whether the machine could do self-check after restarted. c. Check whether the bottom of the DIP switch is the normal operating mode (see Table 2.
7) Zoom/Skype and other softeware can't recognize the camera from PC by USB Connection Most conference softwares can only recognize USB Camera. The USB port on this camera is only used to record and store video. If you want to use this camera as USB Camera, you need a SDI/HDMI to USB video capture card to convert SDI/HDMI signal out to USB signal out.(recommend HDMI to USB capture card, cheap and effective.
7. Example: Streaming to Facebook Step 1: First of all, you need to connect the camera to the network and adjust it according to your own network environment. You can choose DHCP, or set your own IP address and DNS Step 2: Create an event on Facebook and get the following info from Facebook.
Facebook will give you two parameters, "stream key" and "server URL" Step 3: Fill these two parameters into the "host address" and "stream name" of the camera, and change the port to 443 8. Copyright Statement All the contents in this manual and its copyright are owned by the company. No one is allowed to imitate, copy, or translate this manual without the company’s permission. This manual contains no guarantee, standpoint expression or other implies in any form.
