User Guide www.focusrite.
TABLE OF CONTENTS OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OVERVIEW Introduction Thank you for purchasing the Second Generation Scarlett 2i2 Studio, part of the range of Focusrite professional audio interfaces incorporating high quality, Focusrite analogue pre-amplifiers. You now have a simple, compact and complete solution for recording with a microphone or directly from instruments, by routing high quality audio to and from your computer.
Box Contents You should find that your Scarlett 2i2 Studio package comprises: • • • • • • • Scarlett 2i2 (2nd Gen.
GETTING STARTED IMPORTANT: WINDOWS USERS - PLEASE ENSURE THAT YOU RUN THE INSTALLER BEFORE CONNECTING THE SCARLETT 2i2 TO YOUR COMPUTER. THE SECOND GENERATION SCARLETT 2i2 IS CLASS COMPLIANT FOR MACS, THEREFORE DRIVER INSTALLATION IS NOT NECESSARY. Software Installation All software required by the Scarlett 2i2 - and several powerful and useful extras - is available for download from the Focusrite website www.focusrite.com/register.
Mac OS only: Your OS should automatically switch the computer’s default audio inputs & outputs to the . Scarlett 2i2. To verify this, go to System Preferences > Sound, and ensure that the input and output are set to Scarlett 2i2. For more detailed setup options on a Mac, open Applications > Utilities > Audio MIDI Setup. Windows only: Your OS should automatically switch the computer’s default audio inputs & outputs to the Scarlett 2i2.
Connecting your Scarlett 2i2 IMPORTANT - WINDOWS USERS: Before you connect the Scarlett 2i2 to your computer, please complete the software installation according to the instructions on page 5. This will ensure that the hardware uses the correct drivers, and will prevent unexpected behaviour. The Scarlett 2i2 has a single USB 2.0 port (on the rear panel). Once the software installation (if necessary) is complete, simply connect the Scarlett 2i2 to your computer using the USB cable provided.
Once the Scarlett 2i2 is set as the preferred Audio Device* in your DAW, Inputs 1 & 2 and Outputs 1 & 2 will appear in your DAW’s Audio I/O preferences. Depending on your DAW, you may need to enable certain inputs or outputs before use. The two examples below show Inputs 1 & 2 and Outputs 1 & 2 enabled in the Ableton Lite Audio Preferences. *Typical name. Terminology may differ slightly between DAWs.
Examples of Usage The Scarlett 2i2 is an excellent choice for several different recording and monitoring applications. Some typical configurations are shown below. Connecting a microphone or instrument This setup illustrates the most typical configuration for recording with DAW software on your Mac or PC. In this case, you might record guitar through Input 1 and vocals through Input 2 into . Ableton Live Lite, while monitoring the playback from the DAW via headphones (or speakers).
The front panel input sockets are “Combo” type, which accept either an XLR male connector (you will probably have one on the end of your microphone cable) or a ¼” (6.35 mm) jack plug. If you are using a capacitor (or “condenser”) microphone, you will need to turn on the 48 V phantom power. Phantom power should NOT be on when other types of microphone – e.g., dynamic or ribbon - are in use.
Microphone Dos and Don’ts A guide to microphone technique is beyond the scope of this User Guide (though many excellent books on the subject are available), but if you are new to recording with a studio quality microphone, you need to observe a few golden rules. DO use a mic stand. The CM25 MkII has an industry-standard 5/8” threaded insert which allows it to be mounted on most mic stands. An 3/8” adaptor is included to allow it to be fitted to mic stands that have this thread size.
Using Direct Monitoring You will frequently hear the term “latency” used in connection with digital audio systems. In the case of the simple DAW recording application described above, latency is the time it takes for your input signals to pass through your computer and audio software. Latency can be a problem for a performer who wishes to record while monitoring their input signals. The Scarlett 2i2 is fitted with a “Direct Monitoring” option, which overcomes this problem.
Connecting Scarlett 2i2 to loudspeakers The 1/4” jack outputs on the rear panel can be used to connect monitoring speakers. Self-powered monitors (i.e., typical computer speakers) incorporate internal amplifiers, and may be connected directly. Larger, passive loudspeakers will require a separate stereo amplifier; in this case, the rear panel outputs should be connected to the amplifier’s inputs. Connecting active speakers Connecting passive speakers The line output connectors are 3-pole (TRS) ¼” (6.
HARDWARE FEATURES Front Panel 3 2 1 4 7 5 6 8 9 The Front Panel includes the input connectors for Mic, Line and Instrument signals, as well as the input gain and monitoring controls. 1. Inputs 1 & 2 – “Combo” type input sockets - connect microphones, instruments (e.g., guitar), or line level signals via XLR or ¼” (6.35 mm) jacks as appropriate. 2. GAIN 1 and GAIN 2 – adjust the input gain for input signals on inputs 1 and 2 respectively.
Back Panel 10 11 12 10. K (Kensington security lock) – secure your Scarlett 2i2 to a suitable structure if desired. Please see www.kensington.com/kensington/us/us/s/1704/kensington-security-slot.aspx for further information on how to use this feature. 11. USB 2.0 port – Type B connector; connect to your computer with cable supplied. 12. LINE OUTPUTS: LEFT and RIGHT – 2 x ¼” (6.35 mm) TRS jack sockets; +10 dBu output level (variable), electronically balanced.
SPECIFICATIONS Performance Specifications Clock Source Supported sample rates Internal 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Microphone Inputs Dynamic Range 106 dB (A-weighted) Frequency Response 20 Hz to 20 kHz ±0.1 dB THD+N <0.002% (minimum gain, -1 dBFS input with . 22 Hz/22 kHz bandpass filter) Noise EIN -128 dB (A-Weighted) Maximum Input Level +4 dBu Gain Range 50 dB Line Inputs Dynamic Range 106 dB (A-weighted) Frequency Response 20 Hz to 20 kHz, ±0.
Headphone Outputs Dynamic Range 107 dB (A-weighted) Maximum Output Level > +10 dBu THD+N <0.002% (minimum gain, -1 dBFS input, 1 kHz, with . 22 Hz/22 kHz bandpass filter) Physical and Electrical Characteristics Analogue Inputs Connectors XLR “Combo” type: Mic/Line/Inst (Inputs 1-2) on front panel Mic/Line switching Automatic Line/Instrument switching 2 x front panel switches Phantom power Shared 48 V phantom power switch for inputs 1 & 2 .
Scarlett Studio CM25 MkII Microphone Specifications Capsule Type 20 mm dia.
TROUBLESHOOTING For all troubleshooting queries, please visit the Focusrite Answerbase at https://support.focusrite.com/ where you will find articles covering numerous troubleshooting examples. COPYRIGHT AND LEGAL NOTICES Focusrite is a registered trade mark and Scarlett 2i2 and Scarlett 2i2 Studio are trade marks of Focusrite Audio Engineering Limited. All other trade marks and trade names are the property of their respective owners. 2016 © Focusrite Audio Engineering Limited. All rights reserved.
GET STARTED WITH SCARLETT Solo, 2i2 & 2i4 Thanks for choosing the Scarlett (2nd Gen.) as your audio interface. For an in depth video tutorial, please go to focusrite.com/getstarted or see the quick step guide below... Mac Users 1. Connect your Scarlett to your Mac using the included USB cable 2. Go to "System Preferences" then "Sound" and select your Scarlett Eg. "Scarlett 2i2" as the input and output device 3.
To download the included software, you will need to register your Scarlett at focusrite.
Important Safety Precautions I Precautions importantes de securite CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER---SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ATTENTION : POUR REDUIRE LE RISQUE DE CHOC ELECTRIQUE, NE RETIREZ PAS LE CAPOT (NI LE DOS). AUCUNE PIECE N'EST REPARABLE PAR L'UTILISATEUR A L'INTERIEUR. CONFIEZ TOUTE REPARATION ADU PERSONNEL DE MAINTENANCE QUALIFIE.
Important Safety Instructions 1. Read these instructions 2. Keep these instructions 3. Heed all warnings 4. Follow all instructions 5. Do not use this apparatus near water 6. Clean only with dry cloth 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat 8. Do not defeat the safety purpose of the polarized or grounding---type plug. A polarized plug has two blades with one wider than the other.
