SOLO6 BE - TWIN 6 BE - SUB6 BE USER MANUAL Professional Digital Monitoring System Français page 13 Sub6 Twin6 Be Solo6 Be Focal® is a trademark of Focal-JMlab® - BP 374 - 108, rue de l’Avenir - 42353 La Talaudière cedex France - Tel. 00 33 4 77 43 57 00 - Fax 00 33 4 77 43 57 04 - w w w . f o c a l - f r . c o m Due to constant technological advances, Focal reserves its right to modify specifications without notice. Images may not conform exactly to specific product.
SOLO6 BE - TWIN 6 BE - SUB6 BE USER MANUAL Professional Digital Monitoring System 2 An example of this equipment has been tested and found to comply with the following European directives and international standards: Electromagnetic compatibility EN 55103 EN 61000 Electrical safety EN 60065 Important safety information Please read carefully the following instructions and safety information. Heed all warnings and follow all instructions. • Do not remove the back panel.
SOLO6 BE - TWIN 6 BE - SUB6 BE USER MANUAL: INTRODUCTION Professional Digital Monitoring System 3 Thank you for choosing the FOCAL Solo6 Be - Sub 6 - and/or Twin6 Be. The Solo6,Twin6 Be, and the Sub6 are world class Professional Monitoring Systems. They have been designed to offer superior imaging, outstanding precision and extended frequency range, in a compact format suitable for near field monitoring.
SOLO6 BE - TWIN 6 BE - SUB6 BE USER MANUAL Professional Digital Monitoring System 4 Input sensitivity Switch HF control LF control HF control LF control Audio input connector Input sensitivity switch Audio input connector Voltage selector Fuse Holder A Midrange driver selector B Position A Lelf/Right Position B Lelf/Right Voltage selector Fuse Holder Position A Position C Lelf/Right Position B Left C Position C Left Position C Right D Right Lelf/Right Recommended choice for midrang
SOLO6 BE - TWIN 6 BE - SUB6 BE USER MANUAL Professional Digital Monitoring System Hi Pass switch Defeat switch Phase control Level control Lo Pass control 5 Polarity switch Mute switch 6.35 Jack connector for 2.1 Bypass footswitch remote control LFE input connector (mutichannel wiring only) Audio intput connectors (Stereo/2.1 wiring only) Audio output connectors to satellites speakers (Stereo/2.
SOLO6 BE - TWIN 6 BE - SUB6 BE USER MANUAL: PRODUCT OVERVIEW Professional Digital Monitoring System 6 Solo6 Be The Solo6 Be is a two-way active loudspeaker (2 internal amplifiers channels), comprising one “W” cone 6.5” low/mid unit, loaded with a large cross-section laminar port, and an inverted pure Beryllium dome (fig. A). Twin6 Be The Twin6 Be is a three-way active loudspeaker (3 internal amplifiers channels), comprising two “W” cone 6.
SOLO6 BE - TWIN 6 BE - SUB6 BE USER MANUAL: PRODUCT OVERVIEW Professional Digital Monitoring System 7 Positioning The Solo6 Be and Twin6 Be are designed for near field monitoring and should be placed at a distance between 1 and 3 metres from the listener, pointing towards the listening position. They can be sitting on the console top or placed on appropriate stands. In any way it is recommended that the tweeter is at a height from the floor approximately equivalent to that of the listener’s ears.
SOLO6 BE - TWIN 6 BE - SUB6 BE USER MANUAL: USING THE SYSTEM Professional Digital Monitoring System 8 Running in As in all brand new loudspeaker the drivers need some run in period: they are mechanical elements demanding a little time to settle and adapt to the climatic environment This period will vary depending of the working conditions and may take up to a few weeks.
SOLO6 BE - TWIN 6 BE - SUB6 BE USER MANUAL: USING THE SYSTEM Professional Digital Monitoring System 9 Sub6 controls (fig. G) Level This adjustement allows to set the sound level of the subwoofer relative to that of the main loudspeakers. It should also be optimised taking into account the actual location of the subwoofer and its acoustic consequences: for example in an angle the 6 dB acoustic gain should be compensated by an equivalent attenuation to maintain the overall balance of the system.
SOLO6 BE USER MANUAL: TECHNICAL SPECIFICATIONS Professional Digital Monitoring System 10 SYSTEM Frequency response 40Hz - 40kHz Maximum SPL 113dB SPL (peak @ 1m) ELECTRONIC SECTION Input Type/Impedance Connector Sensitivity 150W rms, BASH® technology 100W rms, class AB LF amplifier stage HF amplifier stage Power supply Electronically balanced / 10 kOhms XLR Adjustable, +4dBu ou -10dBV Main Voltage Connection 230V (1.6A fuse rating) 115V (3.
TWIN6 BE USER MANUAL: TECHNICAL SPECIFICATIONS Professional Digital Monitoring System 11 SYSTEM Frequency response 40Hz - 40kHz Maximum SPL 115dB SPL (peak @ 1m) ELECTRONIC SECTION Input Type/Impedance Connector Sensitivity 150W rms, BASH® technology 150W rms, BASH® technology 100W rms, class AB LF amplifier stage LF/MF amplifier stage HF amplifier stage Power supply Electronically balanced / 10 kOhms XLR Adjustable, +4dBu ou -10dBV Main Voltage Connection 230V (2A fuse rating) 115V (4A fuse rat
SUB6 BE USER MANUAL: TECHNICAL SPECIFICATIONS Professional Digital Monitoring System 12 SYSTEM Frequency response 30Hz - 250Hz Maximum SPL 116dB SPL (peak @ 1m) ELECTRONIC SECTION Input Type/Impedance Connector Sensitivity Output (to satellites) Amplifier Internal processing and functions User controls Indicators (LED’s) Power supply Type/Impedance Connector 350 W rms, BASHtechnology Subwoofer section Left, Right, LFE Electronically balanced / 10kOhms Female 3 pins XLR Variable Left, Right Elect
MANUEL UTILISATEUR SOLO6 BE - TWIN 6 BE - SUB6 BE Professional Digital Monitoring System 13 Un échantillon de ce produit a été testé et déclaré en conformité avec les directives européennes et autres normes internationales suivantes : Compatibilité électromagnétique EN 55103 EN 61000 Sécurité électrique EN 60065 Attention ! Risque de choc électrique Ne pas ouvrir Ne pas exposer à l’eau ou à l’humidité Informations de sécurité Nous vous conseillons de lire toutes les instructions de ce manuel et de tenir
MANUEL UTILISATEUR SOLO6 BE - TWIN 6 BE - SUB6 BE : INTRODUCTION Professional Digital Monitoring System 13 Les enceintes Solo6 Be et Twin6 Be, ainsi que le caisson de grave Sub6 constituent un système d’écoute de contrôle professionnel de hautes performances et nous vous remercions d’avoir choisi Focal. Ces produits ont été conçus pour allier image sonore impeccable, extrême précision et réponse en fréquence étendue, dans un format compact adapté à des écoutes de proximité.
MANUEL UTILISATEUR SOLO6 BE - TWIN 6 BE - SUB6 BE Professional Digital Monitoring System 13 Interrupteur de sensibilité d'entrée Contrôle des hautes fréquences Contrôle des basses fréquences Contrôle des hautes fréquences Contrôle des basses fréquences Connecteur d'entrée du signal audio Interrupteur de sensibilité d'entrée Connecteur d'entrée du signal audio Selecteur de tension Porte fusible A Interrupteur de selection du hautparleur médium B Position A Gauche / Droite Position B Gauche / Dr
MANUEL UTILISATEUR SOLO6 BE - TWIN 6 BE - SUB6 BE Professional Digital Monitoring System Commutateur du filtre passe-haut Interrupteur marche/arrêt du filtre passe-haut Connecteur Jack 6.35 pour télécommande du 2.1 Bypass Contrôle de la phase Contrôle du niveau sonore Contrôle du filtre passe-bas 16 Inverseur de polarité Interrupteur mute Connecteur d'entrée LFE (pour une utilisation en configuration multicanal : 5.1, 5.2...) Connecteurs d’entrées audio (pour système stéréo/2.
MANUEL UTILISATEUR SOLO6 BE - TWIN 6 BE - SUB6 BE : LES PRODUITS Professional Digital Monitoring System 17 Solo6 Be La Solo6 Be est une enceinte professionnelle de contrôle de proximité 2 voies active (2 amplificateurs internes), constituée d’un haut-parleur grave/médium Focal de 6,5 pouces (16,5 cm) à membrane sandwich composite "W", chargé par un évent laminaire de grande section et d’un tweeter Focal à dôme inversé en Béryllium pur (fig. A).
MANUEL UTILISATEUR SOLO6 BE - TWIN 6 BE - SUB6 BE : LES PRODUITS Professional Digital Monitoring System 18 Utilisation du Sub6 en configuration multicanal (5.1, 5.2, 6.1 …) LFE : cette entrée est dédiée à l’alimentation de votre Sub6 pour une application multicanal (5.1, 5.2, 6.1, 6.2, 7.1, 7.2 …). L’entrée LFE est uniquement consacrée aux basses fréquences.
MANUEL UTILISATEUR SOLO6 BE - TWIN 6 BE - SUB6 BE : UTILISATION Professional Digital Monitoring System 19 Rodage Les transducteurs utilisés dans les Solo6 Be, Twin6 Be et Sub6 sont des éléments mécaniques complexes qui exigent une période de rodage pour fonctionner au mieux de leurs possibilités et s’adapter ainsi aux conditions de température et d’humidité de votre environnement. Cette période varie selon les conditions rencontrées et peut se prolonger sur quelques semaines.
MANUEL UTILISATEUR SOLO6 BE - TWIN 6 BE - SUB6 BE : UTILISATION Professional Digital Monitoring System 20 Contrôles spécifiques au Sub6 (fig. G) Level Le réglage de niveau du Sub6 permet de déterminer le volume sonore du caisson de grave en fonction de celui des enceintes d’écoute de contrôle.
MANUEL UTILISATEUR SOLO6 BE : SPÉCIFICATIONS Professional Digital Monitoring System 21 PERFORMANCES Réponse en fréquence 40Hz - 40kHz Niveau SPL max 113 dB SPL (crête à 1m) SECTION ELECTRONIQUE Entrée Type/Impedance Connecteur Sensibilité 150 W rms, technologie BASH® 100 W rms, classe AB Etage d’amplification grave Etage d’amplification aigü Alimentation électrique Symétrie électronique / 10 kOhms XLR Ajustable, +4 dBu ou -10 dBV Tension secteur 230 V (fusible 1,6 A) 115 V (fusible 3,15 A) Cordo
MANUEL UTILISATEUR TWIN6 BE : SPÉCIFICATIONS Professional Digital Monitoring System 22 PERFORMANCES Réponse en fréquence 40Hz - 40kHz Niveau SPL max 115 dB SPL (crête à 1m) SECTION ELECTRONIQUE Entrée Type/Impedance Connecteur Sensibilité 150 W rms, technologie BASH® 150 W rms, technologie BASH® Etage d’amplification grave Etage d’amplification grave/ médium Etage d’amplification aigü Alimentation électrique Symétrie électronique / 10 kOhms XLR Ajustable, +4 dBu ou -10 dBV 100 W rms, classe AB Te
MANUEL UTILISATEUR SUB6 BE : SPÉCIFICATIONS Professional Digital Monitoring System 23 PERFORMANCES Réponse en fréquence 30 Hz - 250 Hz Niveau SPL maximum 116 dB SPL (pic à 1m) SECTION ÉLECTRONIQUE Entrées Sorties (vers satellites) Amplification Traitement interne du signal et fonctions Contrôles utilisateur Témoins lumineux (LED) Alimentation eléctrique Gauche, Droite, LFE Symétrique électronique/10 kOhms XLR femelle 3 points Variable Sommation mono Gauche + Droite Symétrique électronique/50 Ohm
Fo ca l - J M l a b ® - B P 3 7 4 - 108, r ue d e l ' A veni r - 42353 La Ta l a udi èr e c ed ex - Fran ce - www.focal-fr.com Tel.