Declaration of Conformity

ManualsBrandsFN-LINK ManualsElectronicsWi-Fi Single-band 1x1 + Bluetooth 4.2 Combo Module

Federal Communications Commission (FCC) Declaration of Conformity

FCC Caution: Any changes or modiﬁcations not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation. This device and its antenna(s) must not be co-located or

operating in conjunction with any other antenna or transmitter. 15.105 Information

to the

user. (b) For a Class B digital device or peripheral, the instructions furnished the user

shall include the following or similar statement, placed in a prominent lo-

cation in the

text of the manual: Note: This equipment has been tested and found

to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits

are designed to provide reasonable protection against harmful

interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However,

there is no guarantee

that interference will not occur in a particular installation.

If this equipment does

cause harmful interference to radio or television reception, which can be determined

by turning the equipment oﬀ and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna. —Increase the separation between

the equipment and receiver. —Connect the equipment into an outlet on a circuit

diﬀerent from that to which the receiver is connected. —Consult the dealer or an

experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20 cm between the radiator and your body.

Radiation Exposure Statement: This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. This transmitter must not be co-

located or operating in conjunction with any other antenna or transmitter. The

availability of some speciﬁc channels and/or operational frequency bands is country

dependent and ﬁrmware programmed at the factory to match the intended destination.

The ﬁrmware setting is not accessible by the end user.

The ﬁnal end product must be labeled in a visible area with the following: “Contains

Transmitter Module FCC ID: 2AATL-6223HSRD” This radio module must not be

installed to co-locate and operating simultaneously with other r adios in host system,

additional testing and equipment authorization may be required to operating

simultaneously with other radio.

This single module have RF shielding and is tested and approved as standalone

conﬁguration,

additional evaluation may be required for any system integrated this

radio module.

PCB Antenna Type, with the maximum 2.46dBi indicated.

Summary of content (4 pages)

PAGE 1
Federal Communications Commission (FCC) Declaration of Conformity FCC Caution: Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 2
Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist.
PAGE 3
Certification Information EU Regulatory RED Declaration of Conformance Hereby, we(FN-LINK TECHNOLOGY LIMITED) declared that this device is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. Legal information For 2412-2472MHz This product can be used across EU member states. RF Exposure The module complies with RF specifications when the device used at 20cm form your body. Maximum EIRP Average Power 802.11b : 18.46dBm 802.11g : 17.94dBm 802.
PAGE 4
DECLARATION OF CONFORMITY I hereby declare that the product WiFi+bt module, 6223H-SRD (Name of product, type or model, batch or serial number) satisfies all the technical regulations applicable to the product within the scope of Council Directives 2014/53/EU, 2014/35/EU and 2014/30/EU: and declare that the same application has not been lodged with any other notified body. ETSI EN 301 489 -1 V2.2.3(2019-11) ETSI EN 301 489 -17 V3.2.4(2020-09) ETSI EN 300 328 V2.2.