6223C-PUD Wi-Fi 2.4G 1T1R 11n + BT 4.
6223C-PUDModule specification Office: 6th Floor, Building U6, Junxiang U8, Hangcheng Avenue, Baoan District, Shenzhen city, Guangdong Province, China Factory: No. 8 litong Road, Liuyang Economic and Technological Development Zone, Changsha, Hunan, China Telephone: + 86-755-2955-8186 Website: www.fn-link.
6223C-PUD 变更履历 版本 日期 描述 编辑 核准 1.0 2018/10/18 New version Lzm Jacky 1.1 2018/12/18 Modify the telephone number Lzm Lxy 1.2 2018/12/25 Modify the office and TEL Lzm Lxy 1.3 2021/04/13 Proofread specification details Lxy Szs 1.3 2021/05/20 Supplementary Material list Lxy Szs 1.
CONTENTS 6223C-PUD 1 Overview....................................................................................................................................1 1.1 Introduction......................................................................................................................... 1 1.2 Features.............................................................................................................................. 1 1.4 General Specification.........................................
6223C-PUD 1. Overview 1.1 Introduction 6223C-PUD is a highly integrated module that supports 802.11b/g/n 1T1R, PCIe port, USB Bluetooth port and wifi speed up to 150Mbps. Bluetooth supports V2.1+V4.2 systems. 1.2 Features 12 x16 the LGA encapsulation Anyway IEee802.11b /g/n+BT v2.1/v4.2 system, BLE4.0 dual-mode Subscribed 2.4g 11n supports a maximum speed of 150Mbps Anyway Wifi data interface supports PCIe V1.1 Slim Bluetooth data interface supports USB 2.0 and SUPPORTS PCM Footed supports IEee802.
223C-PUD 1.2 General Specification Module type 6223C-PUD describe Wi-Fi/Bluetooth module size L x W x H: 16 x 12 x 1.65 mm Wi-fi interface PCI-e BT interface USB / PCM Working temperature 0°C to 70°C Storage temperature -40°C to 80°C RoHS All hardware components are fully compliant with EU RoHS directive 1.4 Recommended Operating Rating Min. Typ. Max. Unit Working temperature 0 25 70 VDD 3.15 3.3 3.45 deg.C V VDDIO 3.15 3.3 3.45 V VCC33 = 3.
6223C-PUD 2 Wi-Fi Rf specification 2.1 2.4GHz Rf specification features WLAN standard Frequency range describe 802.11b: DSSS (CCK, DQPSK, DBPSK) 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) 802.11b/g/n(HT20): 2412MHz to 2462MHz 802.11n(HT40): 2422MHz to 2452MHz Channel number 802.11b/g/n(HT20): 11 802.11n(HT40):7 The output power 11Mbps : 12 dBm ± 1.5 dB @ EVM -9dB 54Mbps : 12 dBm ± 1.5 dB @ EVM -25dB MCS7 -28dB : 12 dBm ± 1.
Receive Sensitivity (11n,20MHz)@10% PER Maximum Input Level - MCS=0 PER @ -88 dBm ≤-82 - MCS=1 PER @ -85 dBm ≤-79 - MCS=2 PER @ -83 dBm ≤-77 - MCS=3 PER @ -79 dBm ≤-74 - MCS=4 PER @ -76 dBm ≤-70 - MCS=5 PER @ -71 dBm ≤-66 - MCS=6 PER @ -69 dBm ≤-65 - MCS=7 PER @ -67 dBm ≤-64 6223C-PUD 802.11b : -10 dBm 802.11g/n : -20 dBm Antenna Reference 2 dBi peak gain 3 Bluetooth Specification 3.1 Bluetooth Feature Specification Description General Specification standard BT v2.1+v4.
6223C-PUD GFSK (1Mbps):-20dBm Maximum input level π/4-DQPSK (2Mbps) :-20dBm 8DPSK (3Mbps) :-20dBm 4 Pin Assignments 4.
6223C-PUD 1 NC － No connect 2 NC － No connect 3 NC － No connect 4 3_3V P power input 3.3V 5 3_3V P power input 3.
6223C-PUD 0: WLAN off, PCIe off Power management event: open drain,active low. 29 PCIe_WAKE O/D Used to reactivate the PCIe slot’s main power rails and reference clocks. VDDIO Share with BT wake up host function via sideband signals. PCI-e reference clock request signal. 30 CLKREQ I/O/D 31 PERST I PCI-e reset signal:active low.
6223C-PUD 60 PCM_OUT O PCM Data output VDDIO 61 PCM_CLK I/O PCM clock VDDIO 62 GND － grounding 63 BT_EN I 1:BT on, USB on (default) 0: BT off, USB off VDDIO 64 LED#2 O BT link LED,active low. VDDIO 65 LED#1 O WLAN link LED,active low. VDDIO 66 NC － No connect 67 NC － No connect 68 GND － grounding 69 USB_D- I/O USB differential - 70 USB_D+ I/O USB differential + 71 NC － No connect 72 3.3V P Main power voltage source input 3.3V 3.3V 73 3.
6223C-PUD 5.2 Physical Outline (Unit: mm) 0.15 2.85 0.50 3.0 0.50 3.0 0.15 0.70 0.30 0.20 6.30 0.30 0.25 0.50 0.50 0.15 0.25 0.3 12.90 0.30 14.30 16(+0.3/-0.1) 0.25 0.20 PIN:1 1.55 0.70 < TOP VIEW > 0.25 0.15 10.30 12(+0.3/-0.
6223C-PUD FN-LINK TECHNOLOGY LIMITED 3.00 12.90 0.50 0.30 0.90 0.25 0.25 0.85 0.30 14.30 16.00 0.50 1.55 0.25 5.
6223C-PUD 5.4 Connector Specification 0.30±0.03 A 3 2 1.00 1.30 1 1.70 1.00 0.45 SECTION: A-A 0.60 1.70 0.20 A 1.50 -X- 0.08 Max 2.00 5.5 Marking Description < TOP VIEW > 6. Host Interface Timing Diagram 6.
6223C-PUD The boot timing diagram is only for cold boot; If system goes to S3, S4 or reboot without power off 3v3, BT_DIS is not allowed to be asserted; BT_DIS low duty require at least 5ms; Do not driving any USB signal when BT_DIS is low; Ton: the main power ramp up duration TPRVRL: power valid to CLKREQ# output active TPVPGL: power valid to PERST# input inactve TPERST#-CLK: reference clock stable before PERST# inactive TonBT: the time interval to turn on BT after PERST# de-asserted Tattach: the interva
6223C-PUD 6.2 PCIe PERST# Timing Sequence 6.
6223C-PUD 7.
6223C-PUD Schematics Confidential 8.
6223C-PUD Part No. Description FG6223CPUD-W1 RTL8723DE, b/g/n, Wi-Fi+BLE4.2, 1T1R, 12X16mm, PCIE+USB, PCB V3.0,双天线座 9.The Key Material List crystal PCB Main chip 1612/2016,40MHZ,15pF,10ppm ECEC,HOSONIC,TKD,JWT 6223C-PUD V3.0,green, 4L, 12X16X0.4mm XY-PCB,KX-PCB,SL-PCB,S unlord,Brain-power PCB RTL8723DE-VB-CG Realtek QFN56P Shielding cover 6223C-PUD-V3.0 屏 蔽 盖 尺 寸 11.35x15.35x1.
6223C-PUD 10.Recommended Reflow Profile Referred to IPC/JEDEC standard.
6223C-PUD 11 Package Information 11.1 Reel A roll of 2000pcs 11.
6223C-PUD 11.3 Packaging Detail 12.
6223C-PUD The Modules is a Moisture Sensitive Device level 3, in according with standard IPC/JEDEC J-STD-020, take care all the relatives requirements for using this kind of components. Moreover, the customer has to take care of the following conditions: a) Calculated shelf life in sealed bag: 12 months at <40°C and <90% relative humidity (RH). b) Environmental condition during the production: 30°C / 60% RH according to IPC/JEDEC J-STD-033A paragraph 5.
FCC Statement FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Integral FPC Antenna , Antenna gain 2dBi This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
