6222D-UUC Wi-Fi Dual-band 2X2 11ac +Bluetooth 5.
6222D-UUC Module Datasheet Office: 6 Floor, Building U6, Junxiang U8 Park, Hangcheng Avenue, Bao'an District, Shenzhen City, CHINA Factory: No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, CHINA TEL: +86-755-2955-8186 Website: www.fn-link.
Revision History Version Date Revision Content Draft Approved 1.0 2020/04/22 New version LYJ SZS 1.1 2020/06/09 Update Pin assignments, reference design and ordering information for share antenna version LYJ SZS 1.2 2020/08/04 Update Power on sequence LYJ SZS 1.3 2020/08/19 Update ordering information LYJ SZS 1.4 2020/08/26 Update 2.4G RF Specification LYJ SZS 1.5 2020/9/1 Update Module Picture and Marking Description LYJ SZS 2.
6222D-UUC CONTENTS 1 Overview....................................................................................................................................1 1.1 Introduction......................................................................................................................... 1 1.2 Features.............................................................................................................................. 1 1.3 General Specification..........................................
6222D-UUC 1 Overview 1.1 Introduction Fn-Link Technology would like to announce a low-cost and low-power consumption module which has all of the Wi-Fi and Bluetooth functionalities. The highly integrated module makes the possibilities of web browsing, VoIP, Bluetooth headsets applications. With seamless roaming capabilities and advanced security, also could interact with different vendors’ 802.11a/b/g/n/ac 2x2 Access Points in the wireless LAN. The wireless module complies with IEEE 802.
222D-UUC Block Diagram: Note: The module has share antenna and non-share antenna version, please refer to the ordering information or contact us for detail. 1.3 General Specification Model Name 6222D-UUC Product Description Support Wi-Fi/Bluetooth Dimension L x W x H: 27 x 18 x 2.03 mm Wi-Fi Interface USB 2.0 BT Interface USB 2.
6222D-UUC 1.4 Recommended Operating Rating Min. Typ. Max. Unit 0 25 70 VCC33 3.15 3.3 3.45 deg.C V VDDIO - 3.3 - V Operating Temperature VCC33 = 3.3V(Unit:mA) Power Consumption Wi-Fi on Mode 130 TX (2.4G HT20) 459 RX (2.4G HT20) 210 TX (5G HT80) 510 RX (5G HT80) 210 BT on 32 ※1.
6222D-UUC 2 Wi-Fi RF Specification 2.1 2.4GHz RF Specification Feature Description WLAN Standard IEEE 802.11b/g/n Wi-Fi compliant Frequency Range 2.400 GHz ~ 2.497 GHz (2.4 GHz ISM Band) Number of Channels 2.4GHz：Ch1 ~ Ch14 802.11b /11Mbps : 17 dBm ± 1.5 dB @ EVM -9dB Output Power 802.11g /54Mbps : 15 dBm ± 1.5 dB @ EVM -25dB 802.11n /MCS7 Spectrum Mask Min. b/g/n : 14 dBm ± 1.5 dB @ EVM -28dB Typ. b/g/n Max.
6222D-UUC SISO Sensitivity (11n,40MHz) PER - MCS=7 PER @ -69 dBm, typical ≤-67 - MCS=0 PER @ -88 dBm, typical ≤-82 - MCS=1 PER @ -85 dBm, typical ≤-79 Receive - MCS=2 - MCS=3 PER @ -83 dBm, typical ≤-77 @10% - MCS=4 PER @ -76 dBm, typical ≤-70 - MCS=5 PER @ -71 dBm, typical ≤-66 - MCS=6 PER @ -70 dBm, typical ≤-65 - MCS=7 PER @ -68 dBm, typical ≤-64 - MCS=0 PER @ -89 dBm, typical ≤-85 - MCS=1 PER @ -86 dBm, typical ≤-82 - MCS=2 PER @ -84 dBm, typical ≤-80 - MCS=3 PER @ -80 dBm, typi
6222D-UUC 2.2 5GHz RF Specification Feature Description WLAN Standard IEEE 802.11a/n/ac 2x2, Wi-Fi compliant Frequency Range 4.900 GHz ~ 5.845 GHz (5.0 GHz ISM Band) Number of Channels 5.0GHz：Please see the table1 802.11a /54Mbps : 15 dBm ± 1.5 dB @ EVM -25dB Output Power 802.11n /MCS7 : 14 dBm ± 1.5 dB @ EVM -28dB 802.11ac /MCS9 : 13 dBm ± 1.
6222D-UUC - MCS=0 PER @ -85 dBm ≤-82 - MCS=1 PER @ -82 dBm ≤-79 - MCS=2 PER @ -80 dBm ≤-77 SISO Receive Sensitivity - MCS=3 (11n,40MHz) @10% PER - MCS=4 PER @ -77 dBm ≤-74 PER @ -73 dBm ≤-70 - MCS=5 PER @ -69 dBm ≤-66 - MCS=6 PER @ -67 dBm ≤-65 - MCS=7 PER @ -66 dBm ≤-64 - MCS=0 PER @ -87 dBm ≤-79 - MCS=1 PER @ -85 dBm ≤-76 - MCS=2 PER @ -83 dBm ≤-74 - MCS=3 PER @ -80 dBm ≤-71 MIMO Receive Sensitivity - MCS=4 (11n,40MHz) @10% PER - MCS=5 PER @ -76 dBm ≤-67 PER @ -72 dB
6222D-UUC - MCS=0, NSS1 PER @ -84 dBm ≤-79 - MCS=1, NSS1 PER @ -81 dBm ≤-77 - MCS=2, NSS1 PER @ -79 dBm ≤-74 - MCS=3, NSS1 PER @ -76 dBm ≤-70 SISO Receive Sensitivity - MCS=4, NSS1 PER @ -73 dBm ≤-66 (11ac,40MHz) @10% PER - MCS=5, NSS1 PER @ -68 dBm ≤-65 - MCS=6, NSS1 PER @ -67 dBm ≤-64 - MCS=7, NSS1 PER @ -66 dBm ≤-59 - MCS=8, NSS1 PER @ -61 dBm ≤-57 - MCS=9, NSS1 PER @ -60 dBm ≤-55 - MCS=0, NSS1 PER @ -86 dBm ≤-79 - MCS=1, NSS1 PER @ -84 dBm ≤-76 - MCS=2, NSS1 PER @ -82 dBm ≤-74 - MCS=3, NSS1 MIMO Receiv
6222D-UUC - MCS=6, NSS1 PER @ -67 dBm ≤-59 - MCS=7, NSS1 PER @ -65 dBm ≤-58 - MCS=8, NSS1 PER @ -61 dBm ≤-53 - MCS=9, NSS1 PER @ -60 dBm ≤-51 Maximum Input Level 802.
6222D-UUC 3 Bluetooth Specification 3.1 Bluetooth Specification Feature Description General Specification Bluetooth Standard Bluetooth V5.0 of 1, 2 and 3 Mbps. Host Interface USB2.0 Antenna Reference Small antennas with 0~2 dBi peak gain Frequency Band 2402 MHz ~ 2480 MHz Number of Channels 79 channels Modulation GFSK, π/4-DQPSK,8DPSK RF Specification Min. Typical. Max. Output Power (Class 1.5) 4 dBm 5.4 dBm 10 dBm Sensitivity @ BER=0.
6222D-UUC 4 Pin Assignments NO. Name Type Description 1 GPIO5 I/O IC GPIO5 (sFlash MISO PIN) 2 GPIO4 I/O IC GPIO4 (sFlash MOSI PIN) 3 EESK I/O External Serial Flash clock (sFlash for dongle application) 4 EECS I/O External 32K or RTC clock input (sFlash CS PIN) 5 GND － Ground connections 6 WL_DP+ I/O USB data+ (USB2.0) 7 WL_DM- I/O USB data- (USB2.
6222D-UUC 18 GND － Ground connections 19 WL_RF1 I/O 2.4G/5G Wi-Fi RF port1 / BT Combo (Option) 20 GND － Ground connections 21 GND － Ground connections 22 WL_RF0 I/O 2.4G/5G Wi-Fi RF port0 (Option) 23 GND － Ground connections 24 GND － Ground connections 25 GND － Ground connections 26 WL_WAKE_HOST O WLAN wake up HOST (Shared with IC GPIO6) 27 RESET I Enable pin for device ON: pull high ; OFF: pull low 3.3V 28 HOST_WAKE_WL I HOST_WAKE_WLAN (Shared with IC GPIO7) 3.
6222D-UUC 5 Dimensions 5.1 Module Picture L x W: 27x 18(+0.3-0.1) mm FG6222DUUC-W0/W2/W3 FG6222DUUC-W1/W4 H: 2.03(±0.1) mm Weight FN-LINK TECHNOLOGY LIMITED 1.58(±0.
6222D-UUC 5.2 Physical Outline (Unit: mm) < TOP VIEW > 5.
6222D-UUC 5.
6222D-UUC 6 Reference Design No Share BT Antenna: Share BT Antenna: FN-LINK TECHNOLOGY LIMITED 16 Proprietary & Confidential Information
6222D-UUC 7 Power on Sequence FN-LINK TECHNOLOGY LIMITED 17 Proprietary & Confidential Information
6222D-UUC 8 Ordering Information Part No. Description FG6222DUUC-W0 RTL8822CU-CG,802.11a/b/g/n/ac+BLE5.0,2T2R+BT ANT,18.0*27.0,USB2.0, 带天线座, 双天线 FG6222DUUC-W1 RTL8822CU-CG,802.11a/b/g/n/ac+BLE5.0,2T2R+BT ANT,18.0*27.0,USB2.0,不带天线座, 三天线 FG6222DUUC-W2 RTL8822CU-CG,a/b/g/n/ac,Wi-Fi+BLE5.0,2T2R+BT ANT,18X27mm,USB2.0,带天线座, 三天线 FG6222DUUC-W3 RTL8822CU-CG,802.11a/b/g/n/ac+BLE5.0,2T2R+BT ANT,18.0*27.0,USB2.0,带天线座, 三天线(12dbm) FG6222DUUC-W4 RTL8822CU-CG,802.11a/b/g/n/ac+BLE5.0,2T2R+BT ANT,18.0*27.0,USB2.
6222D-UUC 10 Recommended Reflow Profile Referred to IPC/JEDEC standard.
6222D-UUC 11 Package Information 11.1 Reel A roll of 800pcs 11.2 Packaging Detail the take-up package Using self-adhesive tape Size of black tape:24mm*32.6m the cover tape :2.13mm*32.
6222D-UUC NY bag size:460mm*385mm size ：350*350*35mm The packing case size:350*210*370mm FN-LINK TECHNOLOGY LIMITED 21 Proprietary & Confidential Information
6222D-UUC 10.3 Carrier Tape Detail 10.4 Moisture sensitivity The Modules is a Moisture Sensitive Device level 3, in according with standard IPC/JEDEC J-STD-020, take care all the relatives requirements for using this kind of components.
Single Modular approval Declaration letter We ，HUNAN FN-LINK TECHNOLOGY LIMITED apply Single modular approval for Product Name: Wi-Fi/BT Module Model: 6222D-UUC FCC ID: 2AATL-6222D-UUC According to 996369 D01 Module Equip Auth Guide v01r04 and 15.212 requirement: 1) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly; Answer ：Yes，shielded for both side .
Please contact me if you have any further questions. Thanks for your attention.
天线测试报告 V1.0 联系方式: 13410505014 wangyuanjian@qinxinsz.com 357932305@qq.com 深圳勤新科技有限公司 射频: 刘工 日期: 2020.08.
目录 1 匹配电路 2 无源图 3 无源效率 4 天线图纸 5 6 深圳勤新科技有限公司
测试环境 • 天线特性使用ETS测试系统微波暗室，微波暗室尺寸7m x 4m x 3m ，测试频率700MHz---6GHz.
1.
2.
3.无源效率 2.4-2.5GHz Freq Effi Effi Gain (MHz) (%) (dB) (dBi) 2400 36.65 -4.52 2.35 2410 35.79 -4.35 2.07 2420 35.46 -4.67 2.02 2430 37.56 -4.51 2.37 2440 38.27 -3.21 2.75 2450 40.45 -3.72 2.88 2460 42.16 -3.75 2.89 2470 42.71 -4.45 2.82 2480 39.54 -4.73 2.24 2490 38.78 -4.57 2.18 2500 37.68 -4.34 2.
2.4-2.
3.无源效率 5.15-5.85GHz Freq Effi Effi Gain (MHz) (%) (dB) (dBi) 5150 45.35 -4.52 1.29 5160 45.97 -4.44 1.46 5170 48.22 -4.18 1.56 5180 44.5 -4.62 1.41 5190 41.11 -5.07 1.55 5200 43.7 -4.72 1.17 5210 45.95 -4.44 1.12 5220 49.46 -4.04 1.55 5230 47.61 -4.25 1.26 5240 44.74 -4.59 1.09 5250 43.25 -4.78 1.21 5260 44.62 -4.61 1.23 5270 49.71 -4.01 1.67 5280 47.84 -4.22 1.48 5290 47.87 -4.22 1.58 5300 43.76 -4.72 1.19 5310 42.91 -4.83 1.
5.15-5.
深圳勤新科技有限公司
FPC antenna specificati You can see antenna size is 32mm*11.3mm* From below Specification. And PCB Pad size for IPEX terminal just follow the below chart. The FPC antenna is connected to the PCB at the position of R43.
R36 0 ohm R37 0 ohm R40 0 ohm R41 0 ohm R44 IPEX 2 R45 IPEX 1
FCC Statement FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247,15.407 Antenna info: External antenna Manufacture:HUNAN FN-LINK TECHNOLOGY LIMITED Model:6222D-UUC Antenna gain 2.5dBi per antenna Antenna number:2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
