6162C-IC Bluetooth 5.
6162C-IC Module Datasheet Office: 6 Floor, Building U6, Junxiang U8 Park, Hangcheng Avenue, Bao'an District, Shenzhen City, CHINA Factory: No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, CHINA TEL: +86-755-2955-8186 Website: www.fn-link.
6162C-IC Revision History Version Date Revision Content Draft 1.0 2019/08/13 First version Lyj 2.
6162C-IC CONTENTS 1 Overview ...............................................................................................................1 1.1 Introduction .......................................................................................................1 1.2 Features ............................................................................................................1 1.3 General Specification ........................................................................................2 1.
6162C-IC 1 Overview 1.1 Introduction Mesh self-organizing network type communication equipment, can efficiently and quickly form a non-central wireless broadband network; Supporting multi-hop relay can effectively expand the coverage radius of wireless network. FN-link releases a low-cost, low-power Bluetooth 5.0 module with Mesh functionality. It is a highly integrated ARM Cortex-M4F 32-bit CPU, 160kByte RAM and 512kByte flash MCU, and Bluetooth 5.0 LE transceiver Mesh network solution.
162C-IC Block Diagram: 1.3 General Specification Model Name 6162C-IC Product Description Bluetooth 5.0 Mesh only Dimension L x W x T: 18.6X13X2.5 (typical) mm BT Interface UART Operating temperature 0°C to 70°C Storage temperature -40°C to 125°C 1.4 Recommended Operating Rating Operating Temperature VBAT&VDDIO Power Consumption FN-LINK TECHNOLOGY LIMITED Information Min. Typ. Max. Unit 0 25 70 2.7 3.0 3.6 deg.C V VCC33 = 3.0V(Unit:mA) BT on 11.
6162C-IC 2 Bluetooth Specification 2.1 Bluetooth Specification Feature Description General Specification Bluetooth Standard Bluetooth V5.0 LE Host Interface UART Antenna Reference On board PCB antennas Frequency Band 2402 MHz ~ 2480 MHz Number of Channels 40(3 Advertising + 37 Data) Modulation GFSK RF Specification Min. Typical. Max. Output Power 0 dBm 8 dBm Sensitivity @ BER=0.01% for LE 1Mbps -97 dBm -90 dBm Sensitivity @ BER=0.
6162C-IC 3 Pin Assignments 3.
6162C-IC 3.
6162C-IC 4 Dimensions 4.1 Module Picture (Unit: mm) L x W : 13 x 18.6 (+0.3-0.1) mm H: 2.5 (±0.1) mm Weight FN-LINK TECHNOLOGY LIMITED Information 0.
6162C-IC 4.
6162C-IC 4.
6162C-IC 5 Reference Design 6 Ordering Information Part No. Description FG6162CICX-01 6162C-IC RTL8762CMF QFN40_5x5 PCB 天 线 BT5.0+UART 带 RF 输出 PCB 版本 V2.
6162C-IC 7 The Key Material List Main Shielding 6162C-IC, 1.5*11.33*10.36mm, copper, no positioning foot cover Main Crystal XTAL-SMD3.2X2.5,40MHz, CL=15pF, 10ppm (TST) Alternative Crystal XTAL-SMD3.2X2.5,40MHz, CL=15pF, 10ppm, -20~+85℃,SIWARD:XTL571100-W103-033(SIWARD) Main Chipset RTL8762CMF-CG QFN40_5x5 Realtek 1T1R BT5.
6162C-IC 8 Recommended Reflow Profile Referred to IPC/JEDEC standard.
6162C-IC 9 Package Information 9.1 Tray Note: The package information will be updated in next revision of this document. Layer size: 206X150X5mm Layer material: PVC Carton size: L310.0*W260.0*H220.
6162C-IC 9.2 Moisture sensitivity The Modules is a Moisture Sensitive Device level 3, in according with standard IPC/JEDEC J-STD-020, take care all the relatives requirements for using this kind of components. Moreover, the customer has to take care of the following conditions: a) Calculated shelf life in sealed bag: 12 months at <40°C and <90% relative humidity (RH). b) Environmental condition during the production: 30°C / 60% RH according to IPC/JEDEC J-STD-033A paragraph 5.
EU DECLARATION OF CONFORMITY in accordance with Annex VI of Directive 2014/53/EU of the European Parliament and of the Council 1. For the following Radio equipment: Product name / Number (s): bluetooth Module Tradename or Brand: FN-LINK Software / Hardware number: v1.0/v1.0 2. Name and address of the manufacturer: Manufacturer: HUNAN FN-LINK TECHNOLOGY LIMITED Address: No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, CHINA 3.
FCC Statement FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Integral antenna with antenna gain 2dBi This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.