Fn nf -L id in en k tia l 欧智通科技 Fn-Link 6110R-IF Co WiFi Single-band 1X1 11n Product Specification
6110R-IF Revision History Date 1.0 2016-12-26 1.1 2017-01-17 Modifications Draft Approved Initial release Colin Ming WILLIAM TAN Add reference design Colin Ming WILLIAM TAN Fn nf -L id in en k tia l Version 2017-02-15 Modified module height Colin Ming WILLIAM TAN 1.3 2017-04-05 Modified operating temperature Colin Ming WILLIAM TAN Co 1.
6110R-IF CONTENTS 1. Introduction .....................................................................................................................1 2. Features ...........................................................................................................................2 3. General specification......................................................................................................3 3.1 General Information ......................................................................
6110R-IF 1. Introduction 6110R-IF is a highly integrated module with low power 802.11n Wireless LAN(WLAN) network controller. It combines an ARM-CM3 MCU, WLAN MAC, a 1T1R capable WLAN baseband, and RF function. It also provides a bunch of configurable GPIO which are configured as digital peripherals for different applications and control usage. Co Fn nf -L id in en k tia l 6110R-IF integrates internal memories for complete WIFI protocol functions.
6110R-IF 2. Features General 22.6mm*13.0mm*2.1mm CMOS MAC, Baseband PHY, and RF in the module for 802.11b/g/n compatible WLAN Complete 802.11n solution for 2.4G band 150Mbps receive PHY rate and 150Mbps transmit PHY rate using 40MHz bandwidth Fn nf -L id in en k tia l z z z z Standards Supported z z z z z 802.11b/g/n compatible WLAN 802.11e QoS Enhancement(WMM) 802.11i(WPA,WP2).
110R-IF 3. General specification 3.1 General Information 6110R-IF Main Chipset Realtek RTL8710AF/ RTL8711AF Fn nf -L id in en k tia l Model Name Host Interface UART,GPIO,SDIO(8711AF) Wifi Standards 802.11b/g/n Other RF Standards N/A Dimension L22.5mm*W13.0mm*H2.1mm 3.2 Operating Conditions 3.
6110R-IF 4. WIFI RF Specification 4.1 2.4GHz RF Specification 2.400～2.4835GHz Channels WiFi: USA/Canada: channel 1~11; Europe/China/Australia: channel 1~13; Japan: channel 1~14 Modulation WiFi: 802.11b(DSSS): CCK(11, 5.5Mbps), DQPSK(2Mbps), DBPSK(1Mbps); 802.11g(OFDM): BPSK(9,6Mbps), QPSK(18,12Mbps), 16QAM(36,24Mbps), 64QAM(54,48Mbps); 802.11n(OFDM): BPSK, QPSK, 16QAM, 64QAM(150Mbps) PHY Data rates WiFi: 802.11b: 11,5.5,2,1 Mbps 802.11g: 54,48,36,24,18,12,9,6 Mbps 802.
6110R-IF MCS 3 -78dBm MCS 4 -75dBm MCS 5 -71dBm MCS 6 -69dBm MCS 7 -67dBm Security 802.11i(WPA,WP2).
6110R-IF 5. Pin Assignments Co Fn nf -L id in en k tia l 5.
6110R-IF 5.2 Pin Definition Name Description 1 AGND Ground connections 2 RF_IO WLAN RF Signal 3 AGND Ground connections 4 GPIOE_4 GPIO Pin. The MUX Function can be referred to Pin Function Table 5 GPIOE_3 GPIO Pin. The MUX Function can be referred to Pin Function Table 6 GPIOE_2 GPIO Pin. The MUX Function can be referred to Pin Function Table 7 GPIOE_1 GPIO Pin. The MUX Function can be referred to Pin Function Table 8 GPIOE_0 GPIO Pin.
6110R-IF GPIOB_0 GPIO Pin. UART1_OUT(multiplexing) 26 GPIOB_1 GPIO Pin. UART1_IN(multiplexing) 27 GPIOB_2 GPIO Pin. The MUX Function can be referred to Pin Function Table 28 GPIOB_3 GPIO Pin. The MUX Function can be referred to Pin Function Table 29 IP Input Differential Signal Fn nf -L id in en k tia l 25 30 IN Input Differential Signal 31 AGND Ground connections 5.2.
6110R-IF Fn nf -L id in en k tia l (For 8711) Note1: PH = Pull-High, HI = High-impedance Note2: GPIOA_1 needs external circuit to do the pull high control; Others’ pull control can be done by register setting(including GPIOA_1’s PD). 6. Ordering Information Description FG6110RRF0-00 SOC model RTL8710AF. FG6110RRF1-00 SOC model RTL8711AF Co Part No.
6110R-IF 7. Dimensions 7.1 Physical Outline Fn nf -L id in en k tia l (unit: mm) Co 2.
6110R-IF 7.
6110R-IF 7.
6110R-IF Co Fn nf -L id in en k tia l 8.
6110R-IF 9. Environmental Requirements 9.1 Recommended Reflow Profile Co Fn nf -L id in en k tia l Referred to IPC/JEDEC standard.
6110R-IF 9.2 Patch WIFI modules installed before the notice: WIFI module installed note: Fn nf -L id in en k tia l 1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a stencil 2. Take and use the WIFI module, please insure the electrostatic protective measures. 3. Reflow soldering temperature should be according to the customer the main size of the products, such as the temperature set at 250 + 5 ℃ for the MID motherboard.
6110R-IF 10. Package Information Layer size: L300.0*W240.0 mm Layer material: PVC Carton size: L310.0*W260.0*H220.
WARING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
