User Manual Version 1.1 April 2015 MEDIVista 18.
Copyright 2015 All Rights Reserved Manual Version 1.1 The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Safety IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. To disconnect the machine from the electrical Power Supply, turn off the power switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine. Read these instructions carefully. Save these instructions for future reference. Follow all warnings and instructions marked on the product. Do not place this product on an unstable cart, stand, or table.
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
LEGISLATION AND WEEE SYMBOL 2012/19/EU Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and disposal of electric and electronic devices and their components. The crossed dustbin symbol on the device means that it should not be disposed of with other household wastes at the end of its working life. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.
Revision History Revision Date Description V1.0 October, 2012 Release V1.
Table of Contents 1 Package Checklist ..................................1 1-1 Standard Items .................................................................. 1 2 System View ............................................2 2-1 2-2 2-3 2-4 2-5 Front View........................................................................... 2 Side View ............................................................................ 3 Rear View ...........................................................................
1 1-1 Package Checklist Standard Items a. System b. Phone module c. Power adapter d. Power cable e.
2 2-1 System View Front View ` No.
2-2 2-3 Side View No. Description 1 Combo smart IC card reader with separate RFID antenna (optional) 2 Speaker Rear View No.
2-4 2-5 Bottom View No.
3 3-1 System Assembly SSD Card Replacement 1. Find the SSD card door at the rear right side of the system and remove the screws(x1) 2. To replace the SSD card, remove the screws (x4) and push the SSD card outwards as shown in the picture.
4 4-1 Peripheral Installation Phone module Installation 1. Loosen the screw(x1) to open the cable cover. 2. Slide the phone module into the phone holder and connect the other end of the phone cable to the connector on the system.
5 Specification Model Motherboard MEDIVista 18.5" Bedside Terminal C43 D35 Processor Pineview D525 Valleyview N2930, Quad-core 1.83G, 7.5W Core Logic CPU with Graphic built-in + ICH 8M Built-in SoC System Memory Graphic Memory LAN Controller / PHY 1066/1333MHz default 2GB RAM (Max FSB800Mhz 8GB) Intel GMA 3150 share system Intel Graphic DX11.
Model MEDIVista 18.5" Bedside Terminal Motherboard C43 D35 Rear I/O (Right) USB 3.0 1 VOIP Phone 1 x RJ11 Rear I/O (Bottom) USB 2.0 2 Line-out 2 (Auto-detect,GPIO), in external IO Mic-In 1 (Auto-detect,GPIO), in external IO Vertical I / O LAN 1 x RJ45 (with 10/100/1000) Power DC Jack Display Port 1 USB 2 (USB 2.
Model Motherboard MEDIVista 18.5" Bedside Terminal C43 D35 VOIP Phone (Front left) Handset module (optional) Smart IC Card Reader Comply with ISO 7816-1,2,3,T=1 and T=0 protocol Combo Smart IC Card Reader (optional) with separate RFID antenna in Comply with ISO 7816-1,2,3,T=1 and T=0 Support MIFARE, MIFARE+ ,Desfire, PC/SC 2.
6 Jumper Settings 6-1 C43 Motherboard 6-1-1 Motherboard Layout 10
6-1-2 Connectors & Functions Connector Function CN3 USB Port For Web Cam CN4 Speaker & MIC CN5 Cradle CN6 Speaker CN7 Audio Jack (Line out & MIC) CN9 Inverter CN10 Build-In MIC CN12 Nurse Call Button CN14 Membrane CN15 30P All-In-One (Membrane, 2D scanner, RFID, Smart card, Audio Jack) CN17 Nurse Call LED Power CN18 Audio Jack (Line Out) CN19/JP5 System Indicator CN20 IrDA CN21 LVDS CN22 Power LED CN23 PS/2 Keyboard CN24 MSR CN25 COM1 CN26 System FAN CN27 MIC for A
Connector Function RJ45_3 LAN2 RJ45_4 LAN1 RJ48_3 Nurse Call SATA1/2 SATA SCSI_3 Remote Control USB3 USB3 USB4 USB1, USB2 of HUB USB5 USB1, USB2 JP3 Touch JP4 Inverter Selection JP6 LCD ID Setting JP7 MCU Power Button JP8 Power Mode Setting JP9 MCU Mode Setting JP10 System Reset JP11 CMOS Operation Mode 12
6-1-3 Jumper Settings Inverter Selection Function JP4 (1-2) (3-4) (5-6) CCFL ▲LED System Indicator JP5 Function (1-2) (3-4) (5-6) (7-8) ▲Disable Enable MCU Power Button Function JP7 (1-2) Disable ▲Enable Power Mode Setting Function JP8 (1-2) ▲ATX Power AT Power 13
MCU Mode Setting Function JP9 (1-2) ▲Normal ISP Debug System Reset Function JP10 (1-2) ▲System Normal System Reset CMOS Operation Mode Function JP11 (1-2) ▲CMOS Normal CMOS Reset ▲ = Manufacturer Default Setting Note: OPEN SHORT 14
6-2 D35 Motherboard 6-2-1 Motherboard Layout 15
6-2-2 Connectors & Functions Connector Function CN12 SATA Power CN6 Touch CN27 Nurse Call LED CN28 Push-Pull Button Connector CN2 HDD LED CN21 LVDS Connector CN1 Power LED CN4 Reading Light Connector CN16 Speaker Connector CN17 Audio Connector CN8 Membrane Connector CN5 COM Port CN15 MSR Connector CN29 USB 2.0 CN35 USB 2.0 CN18 AEC FAN1 FAN CN10 Light Sensor Connector CN19 Build in MIC Connector CN31 USB 2.0 CN32 USB 2.0 CN33 USB 2.
6-2-3 Jumper Settings Inverter Selection Function JP4 (1-2) (3-4) CCFL ▲LED F30 Inverter Selection Function JP3 (1-2) (3-4) (5-6) CCFL ▲LED Cash Drawer Power Setting Function JP5 (1-2) (3-4) 12V ▲19V ▲ = Manufacturer Default Setting Note: OPEN SHORT 17
7 Drivers Installation The shipping package includes a Driver CD. You can find every individual driver and utility that enables you to install the drivers in the Driver CD. Please insert the Driver CD into the drive and double click on the “index.htm” to pick up the models. You can refer to the drivers installation guide for each driver in the “Driver/Manual List”.