User Manual Revision v0.
Copyright 2009 July All Rights Reserved Manual Version 1.3 P/N: The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Safety IMPORTANT SAFETY INSTRUCTIONS 1. To disconnect the machine from the electrial power supply, turn off the power switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine. 2. Read these instructions carefully. Save these instructions for future reference. 3. Follow all warnings and instructions marked on the product. 4. Do not use this product near water. 5. Do not place this product on an unstable cart,stand,or table.
CE MARK This device complies with the requirements of the EEC directive 2004/108/EC with regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage Directive”. Federal Communications Commission statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CAUTION ON LITHIUM BATTERIES There is a danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. LEGISLATION AND WEEE SYMBOL 2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and disposal of electric and electronic devices and their components.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Revision History Changes to the original user manual are listed below: vi Version Date Description 1.
Table Contents 1 Item Checklist...................................... 1 1-1 Standard Items ..........................................................1 2 System View........................................ 2 2-1 2-2 2-3 2-4 Front View .................................................................2 Rear View ..................................................................3 Side View...................................................................4 I/O View ............................................
1 Item Checklist Take the system unit out of the carton. Remove the unit from the carton by holding it by the foam inserts.
2 System View 2-1 Front View ① ④ ② ③ System Overview table -1 Number Component 1 Camera 2 TV Key pad (Power, volume and channel button) 3 Smart card reader slot 4 Phone set holder 2
2-2 Rear View ① ⑦ ⑥ ⑤ ④ ② ③ ⑧ ⑧ System Overview Table -2 Number 3 Component 1 Ventilation 2 VESA Holes 3 Rear I/O (USBx2, DC-IN, Nursing Call, LAN Connector) 4 Phone Set Holder 5 RFID Sensor 6 Smart Card Reader Slot 7 MSR Slot (Option) 8 Speakers
2-3 Side View ① ② System Overview Table -3 Number Component 1 Smart Card Reader Slot 2 MSR Slot (Option) 4
2-4 I/O View ① ⑤⑥⑦ ⑧ System Overview Table -4 Number 5 Component Description 1 USB x 2 2 Nursing Call Connector 3 USB x 1 4 Phone Jack (RJ11) 5 Audio Line-out 6 Audio MIC-IN 7 Built-in MIC 8 Smart Card Reader Slot ②③④
3 Driver Installation 3-1 Driver List B78 V2.2 Driver List Folder/File File Description :\ POS360_B78.htm Driver List :\COMMON\INTEL\Chipset\i8xx Chipset Driver :\COMMON\INTEL\USB20 USB 2.0 Driver :\COMMON\INTEL\VGA\i85x VGA Driver :\COMMON\Ac97_codec\Realtek\ALC202A Audio Driver :\COMMON\ POS_Touch POSTouch Driver :\COMMON\ELO_Touch ELO Touch Driver :\COMMON\Lan_driver\Realtek_PCI 10/100/1000Mb LAN Driver -The following procedures are for Windows 2000/XP,
3-2 Chipset Driver Installation 7 a. Click “Chipset” in the Driver List menu of POS360 B78. b. Double-click “infinst_enu_6.0.1.1002.exe” on the My computer window. c. Click the “Next” button on the Welcome window. d. Click the “Yes” button on the License Agreement window. e. Click the ”Next” button on the Readme Information window. f. Click the “Finish” button and restart your system.
3-3 USB 2.0 Driver Installation OS Requirements OS USB 2.0 requirements Windows XP USB 2.0 drivers are provided in Service Pack 1 (SP1) for Windows XP, which is available through Windows Update. Windows 2000 USB 2.0 drivers are available through Windows Update or Service Pack 4. Windows 98SE/Me USB 2.0 drivers are available on the Intel developer site. Developers and OEMs should contact Orange Ware.
a. Right click My Computer on the desktop and select “properties” b. Select “Hardware”Æ”Device Manager” on system properties c. Select ”Other Devices” Æ “Universal Serial Bus (USB) Controller” Æ”Properties” on Device Manager d. Select “Device”Æ “Update Driver 9 e. Click the ”Next” button on the welcome window.
f. Select “Search for a suitable…”and click the “Next” button on the Install Hardware Device Drivers window g. Select “Specify a location” and click the “Next” button on the Locate Driver Files window. h. Press “Browse” to select the driver and then click the “OK” button to go to the next page i. Click the “Next” button on the Driver Files Search Results window. j. Click the “Finish” button to complete this process. k. Finished.
3-4 VGA Driver Installation 11 a. Click “Win2K_XP” of “VGA” section in the Driver List menu. b. Click “Run” when the “File Download – Security Warning” dialog pops up. c. Click the “Next” button on the Intel(R) Chipset Graphics Driver Software- Install Shield(R) Wizard dialog. d. Click the “Next” button on the Intel(R) Graphics Media Accelerator Driver dialog. e. Click the “Yes” button on the Intel(R) Graphics Media Accelerator Driver dialog. f.
3-5 Audio Driver Installation a. Click “Win9X,ME,2K_XP” of the “Audio” section in the Driver List menu. b. Double-click “A3.71” on the My Computer window. c. Double-click “wdm_a371.exe” on the My Computer window. d. Click “Next” button on the Realtek AC’97 Audio Setup window. e. Click “Yes” button on the Digital Signature Not Found window. f. Click “Finish” button on the Realtek AC’97 Audio Setup window.
3-6 10/100/1000MB LAN Driver Installation a. In the “Realtek RTL8110” section, click on Win9X, ME, 2K, XP b. Double-click “v709” c. Double-click Setup.exe d. Click the Finish button on the Maintenance Complete window. e. Click the OK button and restart your system.
3-7 ELO Touch Driver Installation a. In the “ELO” section, click on “Windows”. c. Click “Install Touch Driver”. e. Click “Browse” button to identify a location or folder name to save to. Click “Unzip” button to extract the files. b. Click “Install Touch Driver” on “FT Touch Auto Install V1.0.2.0” window to detect the touch type in your system. d. A “WinZip Self-Extractor” dialog will pop up. Click “OK”. f. Finished unzipping. Click “OK”.
15 g. Click “Next”. h. Check the “Install Serial Touchscreen” Drivers” check box and click “Next”. i. Click “Yes” to accept the “End User License Agreement”. j. Examining serial ports on the computer k. Check the box “Auto-detect Elo devices” and click “Next”. l.
m. Touchscreen found on “COM5”. Click “Next”. n. Click “Next” to complete the driver installation o. Driver is installing p. The driver installation and setup are now complete. Click “Finish” to start the touchscreen calibration. q. Follow the instructions on the screen to calibrate the Touchscreen. r. Verify that the touchscreen is working correctly by moving your finger on the screen. The mouse cursor should follow your finger.
3-8 POSTouch Driver Installation 17 a. In the “Touch Screen auto…” section, click “Windows”. b. Click “Install Touch Driver” on “FT Touch Auto Install V1.0.2.0” window to detect the touch type in your system. c. “FT Touch Auto Install” program will detect what touch type and interface being installed on the system. d. Click ”Next”. e. Select ”I agree…” and click ”Next”. f. Select the installation folder for the touch utility driver and click ”Next”.
g. Select the shortcut folder for the touch utility driver and click ”Next”. h. Click ”Next”. i. Click ”Next”. j. The computer is installing the touch driver k. Click ”Continue Anyway” button. l. The serial ports are scanned for a touch device. The Touch panel is on COM5.
19 m. Click ”Finish”. n. Click ”OK” to restart the computer and finish the touch utility installation. o. The computer has restarted. Click on the ”Start” button, select “Programs”, then select ”Touchutility”. p. Select the Device tab. q. Click on the 3 points or the 9 points calibration button. r.
s. Touch anywhere on the screen to save the calibration.
4 Peripheral Installation 4-1 Phone Set Installation a. Slide the Phone module into the Phone set holder as the direction of arrow shows. b. Connect the phone cable to the connector on the Phone module. c. Connect the other end of the Phone cable to the connector on the System.
5 Specification Model Name Bedside Terminal Motherboard CPU Supports B78 v2.2 Celeron M ULV 1.0GHz, 512kb cache Chipset Intel 852GM and ICH4 FSB 400Mhz System Memory 2 x DDR SO-DIMM slot, up to 2 GB Graphic Memory Share system memory max 64MB LCD / Touch Panel LCD Size 18.5" TFT LCD Brightness 300nits Maximal Resolution 1366x 768 Touch Screen Type Resistive touch(USB interface) Storage HDD 2.5" Slim HDD bay, SATA HDD Expansion mini-PCI Slot 1, support 802.
Operating Humidity 5% - 95% RH non-condensing Storage Humidity 5% - 95% RH non-condensing Dimension (W x D x H) Weight Mounting OS Support 462 .5x 336 x 75 (mm) (Without handset) 6.8 kg including telephone cradle and handset (max) 75mm x 75mm Windows-XP / Linux Optional Additional Features (Note: options which can be retro-fitted to be advised) Camera (Build in) Magnetic stripe card reader(Optional) Smart card reader dual interface(Optional) 1.
B78 v2.
5-2 Jumper Settings The diagram below illustrates the default jumper settings for the Main Board. An asterisk (*) indicates the default setting. 5-2-1 Connectors & Function 25 Connector Function BAT1 CN1 CN2 CN3 CN4 CN9 CN11 CN13 CN15 CN16 CN18 CN19 CN20 CN21 CN22 CN23 CN24 CN26 CN27 CN28 IED1 PRN1 PWR1 RJ11_1 RJ45_1 RJ45_2 SATA1 USB1 USB2 JP1 JP2 CMOS Battery Base ( Use CR2023) Audio Line Out Audio MIC In Internal Power Switch Speaker & MIC Connector CD-IN Connector Power Connector For 3.
LCD ID Setting Panel # LVDS Resolution Bits 1 1366 x 768 24 Channel JP7 (1-2) (3-4) (5-6) (7-8) 1 3 5 7 2 4 6 8 Single Power Mode Setting Function JP6 (1-2) ATX Power ◎AT Power CMOS Operation Mode Function JP8 (1-2) ◎CMOS Normal CMOS Reset 26
USB Path Setting (do not change) Function JP14 (1-2) To Docking ◎To Motherboard System Indicator Function (do not change) JP13 Function (1-2) (3-4) (5-6) (7-8) 1 3 5 7 2 4 6 8 1 3 5 7 2 4 6 8 ◎Disable Enable ◎ = Default Note: OPEN 27 SHORT
6 BIOS Settings 6-1 BIOS Setup Utility The BIOS setup defines how the system is configured. You need to run this program the first time you configure this product. You may need to run it again if you change the configuration. You need to connect a PC keyboard to the keyboard connector to run the BIOS setup utility. 6-2 Starting the BIOS Setup Turn on or reboot this product.
Note: The BIOS setup menus shown in this section are for reference only and may not exactly match the items of your BIOS version. . Standard CMOS Features Use this menu for basic system configuration. Advanced BIOS Features Use this menu to set the Advanced Features available on the system. Advanced Chipset Features Use this menu to change the values in the chipset registers and optimize the system’s performance. Integrated Peripherals Use this menu to specify your settings for integrated peripherals.
Use this menu to load the BIOS default values, i.e., factory settings for optimal performance system operations. While Award has designed the custom BIOS to maximize performance, the factory has the option to change these defaults to meet their needs. Set Supervisor Password Enables you to change, set, or disable the supervisor or user password. Set Password Change, set, or disable the password. It allows you to limit access to the system and to the setup, or just to the setup.